SJY Scissor Lift. Scissor and boom platforms suit positions a ladder cannot reach safely.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| SJY0.3-3 | 870 / 3000 / 300 / 1400*700 / 380V/50HZ / 1.1 / 420 |
| SJY0.5-4.5 | 980 / 4500 / 500 / 1400*850 / 380V/50HZ / 1.1 / 580 |
| SJY0.5-5 | 980 / 5000 / 500 / 1400*850 / 380V/50HZ / 1.1 / 620 |
| SJY0.3-6 | 980 / 6000 / 300 / 1800*880 / 380V/50HZ / 1.1 / 750 |
| SJY0.5-6 | 980 / 6000 / 500 / 1800*880 / 380V/50HZ / 1.1 / 820 |
| SJY0.3-7.5 | 1250 / 7500 / 300 / 1800*1000 / 380V/50HZ / 1.5 / 1150 |
| SJY0.3-9 | 1350 / 9000 / 300 / 1800*1000 / 380V/50HZ / 1.5 / 1250 |
| SJY0.5-9 | 1600 / 9000 / 500 / 1800*1000 / 380V/50HZ / 1.5 / 1300 |
| SJY1.0-9 | 1780 / 9000 / 1000 / 2000*1200 / 380V/50HZ / 2.2 / 1860 |
| SJY0.3-11 | 1600 / 11000 / 300 / 2100*1150 / 380V/50HZ / 1.5 / 1380 |
| SJY0.5-11 | 1600 / 11000 / 500 / 2100*1150 / 380V/50HZ / 1.5 / 1450 |
| SJY0.3-12 | 1780 / 12000 / 300 / 2450*1350 / 380V/50HZ / 2.2 / 1050 |
| SJY0.5-12 | 1780 / 12000 / 500 / 2450*1350 / 380V/50HZ / 2.2 / 2100 |
| SJY1.0-12 | 1860 / 12000 / 1000 / 2450*1350 / 380V/50HZ / 3 / 2360 |
| SJY0.3-14 | 1960 / 14000 / 300 / 2450*1350 / 380V/50HZ / 3 / 2500 |
| SJY0.5-14 | 1960 / 14000 / 500 / 2450*1350 / 380V/50HZ / 3 / 2550 |
| SJY0.3-16 | 1980 / 16000 / 300 / 2750*1500 / 380V/50HZ / 3 / 2600 |
| SJY0.5-16 | 1980 / 16000 / 500 / 2750*1500 / 380V/50HZ / 3 / 2680 |
Gallery
All detail images published for this model.



SJY Scissor Lift, part of the Aerial work platforms line.
Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.
Elevated maintenance work
Scissor and boom platforms suit positions a ladder cannot reach safely.
Guard rails and a platform replace climbing on racking or frames.
Scissor and boom platforms suit positions a ladder cannot reach safely.
Aerial platforms lift an operator and tools to a working height.
Confirm the aisle width against the pallet depth before choosing a chassis. Compare rated capacity against the heaviest single load you move.
The specification sheet records SJY0.3-3: 870 / 3000 / 300 / 1400*700 / 380V/50HZ / 1.1 / 420; SJY0.5-4.5: 980 / 4500 / 500 / 1400*850 / 380V/50HZ / 1.1 / 580; SJY0.5-5: 980 / 5000 / 500 / 1400*850 / 380V/50HZ / 1.1 / 620; SJY0.3-6: 980 / 6000 / 300 / 1800*880 / 380V/50HZ / 1.1 / 750; SJY0.5-6: 980 / 6000 / 500 / 1800*880 / 380V/50HZ / 1.1 / 820; SJY0.3-7.5: 1250 / 7500 / 300 / 1800*1000 / 380V/50HZ / 1.5 / 1150.
The specification sheet records SJY0.3-9: 1350 / 9000 / 300 / 1800*1000 / 380V/50HZ / 1.5 / 1250; SJY0.5-9: 1600 / 9000 / 500 / 1800*1000 / 380V/50HZ / 1.5 / 1300; SJY1.0-9: 1780 / 9000 / 1000 / 2000*1200 / 380V/50HZ / 2.2 / 1860; SJY0.3-11: 1600 / 11000 / 300 / 2100*1150 / 380V/50HZ / 1.5 / 1380; SJY0.5-11: 1600 / 11000 / 500 / 2100*1150 / 380V/50HZ / 1.5 / 1450; SJY0.3-12: 1780 / 12000 / 300 / 2450*1350 / 380V/50HZ / 2.2 / 1050.
The specification sheet records SJY0.5-12: 1780 / 12000 / 500 / 2450*1350 / 380V/50HZ / 2.2 / 2100; SJY1.0-12: 1860 / 12000 / 1000 / 2450*1350 / 380V/50HZ / 3 / 2360; SJY0.3-14: 1960 / 14000 / 300 / 2450*1350 / 380V/50HZ / 3 / 2500; SJY0.5-14: 1960 / 14000 / 500 / 2450*1350 / 380V/50HZ / 3 / 2550; SJY0.3-16: 1980 / 16000 / 300 / 2750*1500 / 380V/50HZ / 3 / 2600; SJY0.5-16: 1980 / 16000 / 500 / 2750*1500 / 380V/50HZ / 3 / 2680.
Those missing values can be requested directly through the enquiry form.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Door and beam heights decide which mast will clear the route.
Compare the lowered height against the lowest door on the route.
Match the power arrangement to the shifts and the working environment.
Note any attachment that changes the load centre or the overall width.
Compare capacity first, then the lift height the job actually needs.
On the SJY, measure the pallet footprint and the heaviest single load before comparing models.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the SJY, mark the stations where loads are picked up and dropped off each shift.
List the attachments required, such as clamps, sideshift or rotator.
On the SJY, keep the charging or refuelling position clear of the main traffic aisle.
On the SJY, battery or fuel levels are checked at the start of each shift.
Loads are kept low while travelling between stations.
On the SJY, the operator checks load stability before each lift or move.
Routine checks cover tyres, brakes, controls and visible leaks.
On the SJY, storage cages and racking organise the loads it moves between stations.
The layout drawing shows where each machine sits in the operation.
On the SJY, related models in the same group are listed on the family page.
Spare parts for wear items follow the parts manual after delivery.
On the SJY, the specification sheet is the binding reference for listed values.
Capacity above the rated lift height follows the mast curve.
On the SJY, site conditions such as gradient, dust and moisture belong in the enquiry.
Dimensions are checked against the source record before quoting.
On the SJY, quotations follow the model, listed specification and destination port.
The booking reference is issued with the proforma invoice.
On the SJY, mixed equipment can be listed on one enquiry.
Wear parts are supplied after delivery against the parts manual.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Aerial work platforms related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.