Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

GTZZ18 — aerial work platform

GTZZ18 Boom lift, rated capacity 227kg. Aerial platforms lift an operator and tools to a working height.

GTZZ18 aerial work platform — product photo 1 of 2

Ordering facts for the GTZZ18

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

GTZZ18 specification

Values are copied from the source record in their original order and units.

GTZZ18 specification table
ParameterValue
MODELGTZZ18 / GTZZ18Z
Working height maximum *20.12m / 66ft / 16.07m / 66ft2in
Platform height maximum18.42m / 50ft5in / 18.47m / 60ft7in
Below ground reach7.16m / 23ft6in / 7.37m / 24ft2in
APlatform length-8ft model / 0.91m / 3ft
BPlatform width -6ft model / 2.44m / 96ft
CHeight-stowed / 2.45m / 8ft4in
DLength-stowed / 8.05m / 26ft5in / 8.83m / 28ft11in
EWidth / 2.44m / 8ft
FWheelbase / 2.45m / 8ft
GGround clearance-center / 39m / 1ft3.5in
Lift capacity227 kg
Platform rotation180°
Turntable Swing360°continuous
Turntable tailswing0
Travel speed -stowed8km/h / 5mph
Travel speed -raised or extended5.6km/h / 3.5mph
Gradeability -stowed30%
Gradeability -stowed45%
Turning radius - inside3.48m / 11ft5in
Turning radius –outside5.38m / 17ft8in
Controls12V DC Proportional
Solid tires355/55 D625
Power sourceCummins B3.3NA-C60 4 60HP (45kw)
Auxiliary power unit12V DC
Hydraulic tank capacity115.8L / 30.6gal
Fuel tank capacity113.6L / 30gal
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

GTZZ18 Boom lift, part of the Aerial work platforms line.

Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.

Elevated maintenance work

Published figures for this build: rated capacity 227 kg, turning radius 3.48m / 11ft5in.

Aerial platforms lift an operator and tools to a working height.

The platform size matches the operator, tools and load carried up.

Scissor and boom platforms suit positions a ladder cannot reach safely.

Guard rails and a platform replace climbing on racking or frames.

Confirm the aisle width against the pallet depth before choosing a chassis. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The specification sheet records MODEL: GTZZ18 / GTZZ18Z; Specification is not published in the source record; Working height maximum *: 20.12m / 66ft / 16.07m / 66ft2in; Platform height maximum: 18.42m / 50ft5in / 18.47m / 60ft7in; Below ground reach: 7.16m / 23ft6in / 7.37m / 24ft2in; A: Platform length-8ft model / 0.91m / 3ft.

The specification sheet records B: Platform width -6ft model / 2.44m / 96ft; C: Height-stowed / 2.45m / 8ft4in; D: Length-stowed / 8.05m / 26ft5in / 8.83m / 28ft11in; E: Width / 2.44m / 8ft; F: Wheelbase / 2.45m / 8ft; G: Ground clearance-center / 39m / 1ft3.5in.

The specification sheet records Specification is not published in the source record; Lift capacity (kg): 227 kg; Platform rotation: 180°; Turntable Swing: 360°continuous; Turntable tailswing: 0; Travel speed -stowed: 8km/h / 5mph.

The specification sheet records Travel speed -raised or extended: 5.6km/h / 3.5mph; Gradeability -stowed (2WD): 30%; Gradeability -stowed (4WD): 45%; Turning radius - inside: 3.48m / 11ft5in; Turning radius –outside: 5.38m / 17ft8in; Specification is not published in the source record.

The specification sheet records Controls: 12V DC Proportional; Solid tires: 355/55 D625; Specification is not published in the source record; Power source: Cummins B3.3NA-C60 4 60HP (45kw); Specification is not published in the source record; Auxiliary power unit: 12V DC.

The specification sheet records Hydraulic tank capacity: 115.8L / 30.6gal; Fuel tank capacity: 113.6L / 30gal.

Options and attachments are listed separately from the base chassis.

Units are copied as published; convert them only when comparing models.

Those missing values can be requested directly through the enquiry form.

An em dash marks a value the source record did not publish.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

Dimensions in the table come from the source record.

Check the machine weight against floor loading where the site is raised.

Review the tyre type against the surface the machine will run on.

Note any attachment that changes the load centre or the overall width.

Check the chassis width against the aisle and the container door.

  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Mark the stations where loads are picked up and dropped off each shift.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.

Site preparation and operating notes

On the GTZZ18, list the attachments required, such as clamps, sideshift or rotator.

Keep the charging or refuelling position clear of the main traffic aisle.

On the GTZZ18, send photographs of the racking and the existing working area when possible.

Note any slope, threshold or step along the working route.

On the GTZZ18, check headroom under beams, pipes and door frames along the route.

Operation and routine checks

On the GTZZ18, the operator checks load stability before each lift or move.

Unusual noise or movement is reported before further use.

On the GTZZ18, the working area is kept clear of loose packaging and obstacles.

The operator follows the rated capacity marked on the chassis.

How this model fits the operation

On the GTZZ18, the receiving side pairs it with a dock ramp or platform where needed.

Attachments such as clamps or rotators are matched to the load shape.

On the GTZZ18, spare parts for wear items follow the parts manual after delivery.

The layout drawing shows where each machine sits in the operation.

Working conditions and honest limits

On the GTZZ18, tyre choice should match the floor rather than the price list.

The specification sheet is the binding reference for listed values.

On the GTZZ18, the signed datasheet issued with the quotation is the binding version.

Capacity above the rated lift height follows the mast curve.

Delivery, documents and support

On the GTZZ18, quote the serial number and component name when ordering spares.

Mixed equipment can be listed on one enquiry.

On the GTZZ18, the booking reference is issued with the proforma invoice.

Wear parts are supplied after delivery against the parts manual.

The serial number identifies the build when parts are ordered later.

The operation material covers controls, checks and routine service points.

Ask for the specific certificate required for your target country.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What load does the GTZZ18 carry?+

The listed rated capacity is 227kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Aerial work platforms related models

ModelCapacityLiftPowerTypical use
AWP———Inspection at height
AWP6-2000~12-2000———Elevated maintenance work
GTZZ**D———Elevated maintenance work
GTZZ16———Fit-out and installation
SJY———Elevated maintenance work

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.