Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

GTZZ**D — aerial work platform

GTZZ**D Boom lift. Maintenance, fit-out and warehousing at height are the usual jobs.

GTZZ**D aerial work platform — product photo 1 of 4

Ordering facts for the GTZZ**D

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

GTZZ**D specification

Values are copied from the source record in their original order and units.

GTZZ**D specification table
ParameterValue
NOItem / GTZZ12D / GTZZ14D / GTZZ16D
1Working height maximum / 13.8m / 15.5m / 17.3m
2Platform height maximum / 12.0m / 13.7m / 15.5m
3A / Platform Length / 0.76m
BPlatform Width / 1.50m
4C / Height-stowed / 2m
5D / Length-stowed / 5.25m / 6.2m / 7.1m
6E / Width / 1.75m / 2m
7F / Wheel Base / 2m
8G / Ground clearance center / 200mm
7Horizontal reach maximum / 4.89m / 6.56m / 7.95m
9Lift capacity / 230 kg
10Turning radius (outside) / 4.5 m
11Turntable Swing / 360°continuous
12Speed of Turntable Swing / 0 ~ 1.5rpm
13Leveling mode / Automatic
14Platform rotation / 180°
15250-15solid tire
16Hydraulic oil tank capacity / 70L
17Weight / 6500 kg / 6780 kg / 7210 kg
18Travel speed / Stowed / 5
19Raised or extended / 0.8
20Grade ability / 30%
21Drive and turn mode / 4WD×2×2
22Battery / 6×8/420Ah TROJAN
23Travel electric motor / 2×6.5
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

GTZZ**D Boom lift, part of the Aerial work platforms line.

Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.

Elevated maintenance work

Guard rails and a platform replace climbing on racking or frames.

The platform size matches the operator, tools and load carried up.

Scissor and boom platforms suit positions a ladder cannot reach safely.

Aerial platforms lift an operator and tools to a working height.

State any attachment required alongside the base model. Confirm the charger voltage or fuel type for your destination country.

Specification walk-through

The specification sheet records NO: Item / GTZZ12D / GTZZ14D / GTZZ16D; 1: Working height maximum / 13.8m / 15.5m / 17.3m; 2: Platform height maximum / 12.0m / 13.7m / 15.5m; 3: A / Platform Length / 0.76m; B: Platform Width / 1.50m; 4: C / Height-stowed / 2m.

The specification sheet records 5: D / Length-stowed / 5.25m / 6.2m / 7.1m; 6: E / Width / 1.75m / 2m; 7: F / Wheel Base / 2m; 8: G / Ground clearance center / 200mm; 7: Horizontal reach maximum / 4.89m / 6.56m / 7.95m; 9 (kg): Lift capacity / 230 kg.

The specification sheet records 10: Turning radius (outside) / 4.5 m; 11: Turntable Swing / 360°continuous; 12: Speed of Turntable Swing / 0 ~ 1.5rpm; 13: Leveling mode / Automatic; 14: Platform rotation / 180°; 15: 250-15solid tire.

The specification sheet records 16: Hydraulic oil tank capacity / 70L; 17 (kg): Weight / 6500 kg / 6780 kg / 7210 kg; 18 (km/h): Travel speed / Stowed / 5; 19 (km/h): Raised or extended / 0.8; 20: Grade ability / 30%; 21: Drive and turn mode / 4WD×2×2.

The specification sheet records 22: Battery / 6×8/420Ah TROJAN; 23 (kw/sme): Travel electric motor / 2×6.5.

Options and attachments are listed separately from the base chassis.

Each row in the table keeps the label and value from the source record.

Those missing values can be requested directly through the enquiry form.

An em dash marks a value the source record did not publish.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

Measure the pallet footprint before the chassis is shortlisted.

List the models that clear each constraint before asking for a quote.

Check the machine weight against floor loading where the site is raised.

Check the chassis width against the aisle and the container door.

Review the tyre type against the surface the machine will run on.

  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List the load per move, lift height and floor surface before comparing models.

Site preparation and operating notes

On the GTZZ**D, check the lowest door, beam height and aisle the truck has to pass through.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the GTZZ**D, keep the charging or refuelling position clear of the main traffic aisle.

Send photographs of the racking and the existing working area when possible.

On the GTZZ**D, mark the stations where loads are picked up and dropped off each shift.

Operation and routine checks

On the GTZZ**D, attachments are secured before the machine leaves the station.

The working area is kept clear of loose packaging and obstacles.

On the GTZZ**D, routine checks cover tyres, brakes, controls and visible leaks.

Unusual noise or movement is reported before further use.

How this model fits the operation

On the GTZZ**D, a mixed enquiry can list this model together with other families.

Storage cages and racking organise the loads it moves between stations.

On the GTZZ**D, attachments such as clamps or rotators are matched to the load shape.

Spare parts for wear items follow the parts manual after delivery.

Working conditions and honest limits

On the GTZZ**D, attachments are quoted separately once the base chassis is fixed.

Dimensions are checked against the source record before quoting.

On the GTZZ**D, the signed datasheet issued with the quotation is the binding version.

Tyre choice should match the floor rather than the price list.

Delivery, documents and support

On the GTZZ**D, mixed equipment can be listed on one enquiry.

The operation and parts material travel with the machine.

On the GTZZ**D, the booking reference is issued with the proforma invoice.

Documents issued for an order are listed in the quotation.

The operation material covers controls, checks and routine service points.

The serial number identifies the build when parts are ordered later.

The parts manual lists the wear items and their reference views.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Aerial work platforms related models

ModelCapacityLiftPowerTypical use
AWP———Inspection at height
AWP6-2000~12-2000———Elevated maintenance work
GTZZ16———Fit-out and installation
GTZZ18227—12 VElevated maintenance work
SJY———Elevated maintenance work

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.