AWP6-2000~12-2000 Boom lift, AC. Guard rails and a platform replace climbing on racking or frames.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model specification | AWP6-2000 / AWP8-2000 / AWP10-2000 / AWP12-2000 |
| Platform height | 6000 / 8000 / 10000 / 12000 mm |
| Working height | 7700 / 9700 / 11700 / 13700 mm |
| Distance from base to ground | 80 mm |
| Platform load rating | 300 / 250 / 200 kg |
| Working platform size | 1500x600 / 1620x600 / 1740x600 mm |
| Expanded leg size | 1950x1850 / 2130x1980 / 2550x2500 mm |
| power supply | AC AC / V / 220 |
| DC DC | 24 V |
| Battery | / 2x12/60 |
| battery charger | / 24/10 |
| Lifting motor | AC AC / v/kw / 220/1.5 |
| DC DC | / 24/2.2 |
| Length of the whole machine | 1550 / 1670 / 1790 mm |
| Overall width | 900 mm |
| Overall height | 1970 / 2070 mm |
| Total Weight | AC AC / kg / 480 / 580 / 680 / 780 |
| DC DC | 510 / 610 / 710 / 810 kg |
Gallery
All detail images published for this model.


AWP6-2000~12-2000 Boom lift, part of the Aerial work platforms line.
Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.
Elevated maintenance work
Published figures for this build: overall width 900 mm.
Maintenance, fit-out and warehousing at height are the usual jobs.
Aerial platforms lift an operator and tools to a working height.
Aerial platforms lift an operator and tools to a working height.
Scissor and boom platforms suit positions a ladder cannot reach safely.
State any attachment required alongside the base model. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Model specification: AWP6-2000 / AWP8-2000 / AWP10-2000 / AWP12-2000; Platform height (mm): 6000 / 8000 / 10000 / 12000 mm; Working height (mm): 7700 / 9700 / 11700 / 13700 mm; Distance from base to ground (mm): 80 mm; Platform load rating (kg): 300 / 250 / 200 kg; Working platform size (mm): 1500x600 / 1620x600 / 1740x600 mm.
The specification sheet records Expanded leg size (mm): 1950x1850 / 2130x1980 / 2550x2500 mm; power supply: AC AC / V / 220; DC DC (v): 24 V; Battery (v/ah): / 2x12/60; battery charger (v/a): / 24/10; Lifting motor: AC AC / v/kw / 220/1.5.
The specification sheet records DC DC (v/kw): / 24/2.2; Length of the whole machine (mm): 1550 / 1670 / 1790 mm; Overall width (mm): 900 mm; Overall height (mm): 1970 / 2070 mm; Total Weight: AC AC / kg / 480 / 580 / 680 / 780; DC DC (kg): 510 / 610 / 710 / 810 kg.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Units are copied as published; convert them only when comparing models.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
Measure the pallet footprint before the chassis is shortlisted.
Review the tyre type against the surface the machine will run on.
Compare capacity first, then the lift height the job actually needs.
Compare the lowered height against the lowest door on the route.
Check the chassis width against the aisle and the container door.
On the AWP6-2000~12-2000, state the shifts per day so the power arrangement can be sized properly.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the AWP6-2000~12-2000, measure the pallet footprint and the heaviest single load before comparing models.
List the attachments required, such as clamps, sideshift or rotator.
On the AWP6-2000~12-2000, check the lowest door, beam height and aisle the truck has to pass through.
On the AWP6-2000~12-2000, the working area is kept clear of loose packaging and obstacles.
Unusual noise or movement is reported before further use.
On the AWP6-2000~12-2000, loads are kept low while travelling between stations.
Battery or fuel levels are checked at the start of each shift.
On the AWP6-2000~12-2000, related models in the same group are listed on the family page.
This machine usually works alongside pallet trucks and stacking equipment.
On the AWP6-2000~12-2000, spare parts for wear items follow the parts manual after delivery.
Storage cages and racking organise the loads it moves between stations.
On the AWP6-2000~12-2000, any option not listed should be confirmed in writing before order.
Tyre choice should match the floor rather than the price list.
On the AWP6-2000~12-2000, the specification sheet is the binding reference for listed values.
The signed datasheet issued with the quotation is the binding version.
On the AWP6-2000~12-2000, the operation and parts material travel with the machine.
The enquiry should include the quantity and destination port.
On the AWP6-2000~12-2000, documents issued for an order are listed in the quotation.
The booking reference is issued with the proforma invoice.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
The listed power arrangement is AC. Confirm the supply voltage or fuel type for your site before ordering.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.