Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

GTZZ16 — aerial work platform

GTZZ16 Boom lift. The platform size matches the operator, tools and load carried up.

GTZZ16 aerial work platform — product photo 1 of 1

Ordering facts for the GTZZ16

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

GTZZ16 specification

Values are copied from the source record in their original order and units.

GTZZ16 specification table
ParameterValue
Working height maximum *17.7m / 58ft
Platform height maximum16.0m / 52ft6in
Horizontal reach maximum **7.65m / 25ft
APlatform length-8ft model / 0.76 m / 2ft6in
BPlatform width-8ft model / 1.83m / 6ft
CHeight-stowed / 2.26 m / 7ft5in
DLength-stowed / 7.8m / 25ft7in
EWidth / 2.29m / 7ft6in
FWheelbase / 2.2m / 7ft2in
GGround clearance-center / 39cm / 1ft3.5in
Lift capacity227 kg / 500Ibs
Platform rotation180°
Turntable Swing360°continuousss
Turntable tailswing0
Drive speed -stowed5.6km/h / 3.36mph
Gradeability -stowed30%
Gradeability -stowed45%
Turning radius - inside1.8m / 6ft
Turning radius –outside4.5m / 14ft9in
Controls12V DCProportional
Request price Datasheet (print / save as PDF) Ask about configuration

What this model is built to do

GTZZ16 Boom lift, part of the Aerial work platforms line.

Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.

Fit-out and installation

Published figures for this build: rated capacity 227 kg / 500Ibs, turning radius 1.8m / 6ft.

Maintenance, fit-out and warehousing at height are the usual jobs.

The platform size matches the operator, tools and load carried up.

Outdoor use depends on ground firmness and wind exposure on site.

Scissor and boom platforms suit positions a ladder cannot reach safely.

Confirm the aisle width against the pallet depth before choosing a chassis. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Working height maximum *: 17.7m / 58ft; Platform height maximum: 16.0m / 52ft6in; Horizontal reach maximum **: 7.65m / 25ft; A: Platform length-8ft model / 0.76 m / 2ft6in; B: Platform width-8ft model / 1.83m / 6ft; C: Height-stowed / 2.26 m / 7ft5in.

The specification sheet records D: Length-stowed / 7.8m / 25ft7in; E: Width / 2.29m / 7ft6in; F: Wheelbase / 2.2m / 7ft2in; G: Ground clearance-center / 39cm / 1ft3.5in; Specification is not published in the source record; Lift capacity (restricted): 227 kg / 500Ibs.

The specification sheet records Platform rotation: 180°; Specification is not published in the source record; Turntable Swing: 360°continuousss; Specification is not published in the source record; Turntable tailswing: 0; Drive speed -stowed: 5.6km/h / 3.36mph.

The specification sheet records Gradeability -stowed (2WD): 30%; Specification is not published in the source record; Gradeability -stowed (4WD): 45%; Turning radius - inside: 1.8m / 6ft; Turning radius –outside: 4.5m / 14ft9in; Controls: 12V DCProportional.

The specification sheet records Specification is not published in the source record.

Units are copied as published; convert them only when comparing models.

Each row in the table keeps the label and value from the source record.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

Send pallet size, door height and aisle width with the enquiry.

Compare capacity first, then the lift height the job actually needs.

Note any attachment that changes the load centre or the overall width.

List the models that clear each constraint before asking for a quote.

Check the machine weight against floor loading where the site is raised.

  • List the load per move, lift height and floor surface before comparing models.
  • State the shifts per day so the power arrangement can be sized properly.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the GTZZ16, keep the charging or refuelling position clear of the main traffic aisle.

Check the lowest door, beam height and aisle the truck has to pass through.

On the GTZZ16, list the attachments required, such as clamps, sideshift or rotator.

Measure the pallet footprint and the heaviest single load before comparing models.

On the GTZZ16, mark the stations where loads are picked up and dropped off each shift.

Operation and routine checks

On the GTZZ16, the working area is kept clear of loose packaging and obstacles.

Attachments are secured before the machine leaves the station.

On the GTZZ16, the operator checks load stability before each lift or move.

Unusual noise or movement is reported before further use.

How this model fits the operation

On the GTZZ16, related models in the same group are listed on the family page.

Spare parts for wear items follow the parts manual after delivery.

On the GTZZ16, storage cages and racking organise the loads it moves between stations.

This machine usually works alongside pallet trucks and stacking equipment.

Working conditions and honest limits

On the GTZZ16, the specification sheet is the binding reference for listed values.

Tyre choice should match the floor rather than the price list.

On the GTZZ16, attachments are quoted separately once the base chassis is fixed.

Any option not listed should be confirmed in writing before order.

Delivery, documents and support

On the GTZZ16, the operation and parts material travel with the machine.

Packing follows sea-freight practice for the chosen chassis.

On the GTZZ16, wear parts are supplied after delivery against the parts manual.

Loading is recorded before the container is sealed.

The operation material covers controls, checks and routine service points.

Ask for the specific certificate required for your target country.

The serial number identifies the build when parts are ordered later.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Aerial work platforms related models

ModelCapacityLiftPowerTypical use
AWP———Inspection at height
AWP6-2000~12-2000———Elevated maintenance work
GTZZ**D———Elevated maintenance work
GTZZ18227—12 VElevated maintenance work
SJY———Elevated maintenance work

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.