Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

AWP — aerial work platform

AWP Vertical mast work platform, AC. The platform size matches the operator, tools and load carried up.

AWP aerial work platform — product photo 1 of 4

Ordering facts for the AWP

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

AWP specification

Values are copied from the source record in their original order and units.

AWP specification table
ParameterValue
Model specificationAWP6-1000 / AWP8-1000 / AWP10-1000
Platform height6000 / 8000 / 10000 mm
Working height7700 / 9700 / 11700 mm
Distance from base to ground80 mm
Platform load rating150 / 125 kg
Working platform size650x600 mm
Expanded leg size1930x1770 mm
Power supplyAC AC / V / 220
DC DC24 V
Battery/ 2x12/60
charger/ 24/10
Lifting motorAC AC / v/kw / 220/0.75
DC DC/ 24/1.2
Length of the whole machine1330 mm
Overall width800 mm
Overall height1950 / 2050 / 2150 mm
Whole machine weightAC AC / kg / 300 / 350 / 400
DC DC330 / 380 / 430 kg
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

AWP Vertical mast work platform, part of the Aerial work platforms line.

Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.

Inspection at height

Published figures for this build: overall width 800 mm.

Guard rails and a platform replace climbing on racking or frames.

Scissor and boom platforms suit positions a ladder cannot reach safely.

Guard rails and a platform replace climbing on racking or frames.

Guard rails and a platform replace climbing on racking or frames.

State any attachment required alongside the base model. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records Model specification: AWP6-1000 / AWP8-1000 / AWP10-1000; Platform height (mm): 6000 / 8000 / 10000 mm; Working height (mm): 7700 / 9700 / 11700 mm; Distance from base to ground (mm): 80 mm; Platform load rating (kg): 150 / 125 kg; Working platform size (mm): 650x600 mm.

The specification sheet records Expanded leg size (mm): 1930x1770 mm; Power supply: AC AC / V / 220; DC DC (v): 24 V; Battery (v/ah): / 2x12/60; charger (v/a): / 24/10; Lifting motor: AC AC / v/kw / 220/0.75.

The specification sheet records DC DC (v/kw): / 24/1.2; Length of the whole machine (mm): 1330 mm; Overall width (mm): 800 mm; Overall height (mm): 1950 / 2050 / 2150 mm; Whole machine weight: AC AC / kg / 300 / 350 / 400; DC DC (kg): 330 / 380 / 430 kg.

Units are copied as published; convert them only when comparing models.

An em dash marks a value the source record did not publish.

Rated figures apply at the standard load centre unless a row says otherwise.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

The listed figures follow the record; options are confirmed on the quotation.

Compare capacity first, then the lift height the job actually needs.

Check the chassis width against the aisle and the container door.

Review the tyre type against the surface the machine will run on.

Match the power arrangement to the shifts and the working environment.

  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List the load per move, lift height and floor surface before comparing models.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the AWP, measure the pallet footprint and the heaviest single load before comparing models.

Keep the charging or refuelling position clear of the main traffic aisle.

On the AWP, send photographs of the racking and the existing working area when possible.

State the shifts per day so the power arrangement can be sized properly.

On the AWP, check headroom under beams, pipes and door frames along the route.

Operation and routine checks

On the AWP, the working area is kept clear of loose packaging and obstacles.

Battery or fuel levels are checked at the start of each shift.

On the AWP, loads are kept low while travelling between stations.

The operator follows the rated capacity marked on the chassis.

How this model fits the operation

On the AWP, this machine usually works alongside pallet trucks and stacking equipment.

Spare parts for wear items follow the parts manual after delivery.

On the AWP, related models in the same group are listed on the family page.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the AWP, attachments are quoted separately once the base chassis is fixed.

Capacity above the rated lift height follows the mast curve.

On the AWP, any option not listed should be confirmed in writing before order.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the AWP, loading is recorded before the container is sealed.

The operation and parts material travel with the machine.

On the AWP, quotations follow the model, listed specification and destination port.

Quote the serial number and component name when ordering spares.

Test and conformity documents follow the model and destination market.

The operation material covers controls, checks and routine service points.

Ask for the specific certificate required for your target country.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What power unit does it use?+

The listed power arrangement is AC. Confirm the supply voltage or fuel type for your site before ordering.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Aerial work platforms related models

ModelCapacityLiftPowerTypical use
AWP6-2000~12-2000———Elevated maintenance work
GTZZ**D———Elevated maintenance work
GTZZ16———Fit-out and installation
GTZZ18227—12 VElevated maintenance work
SJY———Elevated maintenance work

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.