Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

GJ*** — Forklift attachment

GJ*** Forklift attachment. Dimensions on the datasheet are checked against the site layout.

GJ*** Forklift attachment — product photo 1 of 4

Ordering facts for the GJ***

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

GJ*** specification

Values are copied from the source record in their original order and units.

GJ*** specification table
ParameterValue
GJ18J-A11900@500 / 1-2.5t / 520-1720 / 455 / 955 / 1040 / 825 / 401 / 115 / 460
GJ18J-A21900@500 / 1-2.5t / 515-1765 / 1100 / 1260 / 940 / 825 / 388 / 115 / 640
GJ27J-B12500@500 / 3-4.5t / 600-1945 / 455 / 1200 / 1010 / 970 / 310 / 140 / 570
GJ27J-B22500@500 / 3-4.5t / 600-1945 / 506 / 1054 / 1010 / 970 / 307 / 132 / 630
ModelPressure value (Bar) / Flow value(L/min)
MaximumLateral movement / Clamping action
LeastRecommend / Maximum / Least
GJ**J-A*160 / 4 / 15 / 26
GJ**J-B*160 / 4 / 23 / 38 / 15
GJ19RT-A11900@500 / 1-2.5t / 560-1760 / 455 / 1075 / 1040 / 770 / 20 / 290 / 252 / 685
GJ25RT-B12500@500 / 3-4.5t / 600-1880 / 506 / 1054 / 1010 / 772 / 20 / 371 / 254 / 726
ModelPressure value(Bar) / Flow value(L/min)
LeastMaximum / Lateral movement / Clamping action
LeastRecommend / Maximum / Least
GJ**RT35 / 160 / 19 / 38 / 57
ModelSpeed / Torque
GJ**RT5.2r/min@57L/min / 9000N.m@160Bar
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

GJ*** Forklift attachment, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Hand and trolley duties

Dimensions on the datasheet are checked against the site layout.

Dimensions on the datasheet are checked against the site layout.

Selection starts from the load per move and the space around it.

Each build is quoted line by line once the duty cycle is confirmed.

Match the tyre type to the floor surface rather than the price list. State any attachment required alongside the base model.

Specification walk-through

The specification sheet records GJ18J-A1: 1900@500 / 1-2.5t / 520-1720 / 455 / 955 / 1040 / 825 / 401 / 115 / 460; GJ18J-A2: 1900@500 / 1-2.5t / 515-1765 / 1100 / 1260 / 940 / 825 / 388 / 115 / 640; GJ27J-B1: 2500@500 / 3-4.5t / 600-1945 / 455 / 1200 / 1010 / 970 / 310 / 140 / 570; GJ27J-B2: 2500@500 / 3-4.5t / 600-1945 / 506 / 1054 / 1010 / 970 / 307 / 132 / 630; Model: Pressure value (Bar) / Flow value(L/min); Maximum: Lateral movement / Clamping action.

The specification sheet records Least: Recommend / Maximum / Least; GJ**J-A*: 160 / 4 / 15 / 26; GJ**J-B*: 160 / 4 / 23 / 38 / 15; GJ19RT-A1: 1900@500 / 1-2.5t / 560-1760 / 455 / 1075 / 1040 / 770 / 20 / 290 / 252 / 685; GJ25RT-B1: 2500@500 / 3-4.5t / 600-1880 / 506 / 1054 / 1010 / 772 / 20 / 371 / 254 / 726; Model: Pressure value(Bar) / Flow value(L/min).

The specification sheet records Least: Maximum / Lateral movement / Clamping action; Least: Recommend / Maximum / Least; GJ**RT: 35 / 160 / 19 / 38 / 57; Model: Speed / Torque; GJ**RT: 5.2r/min@57L/min / 9000N.m@160Bar.

Units are copied as published; convert them only when comparing models.

Those missing values can be requested directly through the enquiry form.

An em dash marks a value the source record did not publish.

Rated figures apply at the standard load centre unless a row says otherwise.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

Measure the pallet footprint before the chassis is shortlisted.

Check the chassis width against the aisle and the container door.

List the models that clear each constraint before asking for a quote.

Match the power arrangement to the shifts and the working environment.

Check the machine weight against floor loading where the site is raised.

  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List the load per move, lift height and floor surface before comparing models.

Site preparation and operating notes

On the GJ***, measure the pallet footprint and the heaviest single load before comparing models.

Note any slope, threshold or step along the working route.

On the GJ***, list the attachments required, such as clamps, sideshift or rotator.

Check headroom under beams, pipes and door frames along the route.

On the GJ***, send photographs of the racking and the existing working area when possible.

Operation and routine checks

On the GJ***, battery or fuel levels are checked at the start of each shift.

Loads are kept low while travelling between stations.

On the GJ***, the operator checks load stability before each lift or move.

The working area is kept clear of loose packaging and obstacles.

How this model fits the operation

On the GJ***, attachments such as clamps or rotators are matched to the load shape.

A mixed enquiry can list this model together with other families.

On the GJ***, the layout drawing shows where each machine sits in the operation.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the GJ***, the signed datasheet issued with the quotation is the binding version.

Capacity above the rated lift height follows the mast curve.

On the GJ***, the specification sheet is the binding reference for listed values.

Tyre choice should match the floor rather than the price list.

Delivery, documents and support

On the GJ***, loading is recorded before the container is sealed.

The enquiry should include the quantity and destination port.

On the GJ***, quote the serial number and component name when ordering spares.

Wear parts are supplied after delivery against the parts manual.

Ask for the specific certificate required for your target country.

The parts manual lists the wear items and their reference views.

The serial number identifies the build when parts are ordered later.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
ST880X———Manual pallet jack duty

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.