TJ*** Forklift attachment. The machine is specified against the load, floor and working height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| TJ14S-A1 | 1400@500 / 2-2.5t / 330-1550 / 1040 / 550 / 780 / 225 / 370 / 208 / 125 / 262 |
| TJ14S-B1 | 1900@500 / 3-4.5t / 330-1550 / 1040 / 625 / 960 / 225 / 395 / 208 / 125 / 262 |
| TJ19S-A1 | 1900@500 / 2-2.5t / 520-1750 / 1040 / 807 / 815 / 235 / 360 / 212 / 162 / 100 |
| Model | Pressure value(Bar) / Flow value(L/min) |
| Least | Maximum / Lateral movement / Clamping action |
| Least | Recommend / Maximum / Least |
| TJ**S | 35 / 160 / 4 / 11 / 21 / 15 / 38 |
| TJ19R-A1 | 1900@500 / 2-2.5t / 470-1700 / 1040 / 800 / 814 / 785 / 326 / 382 / 275 |
| TJ19R-A2 | 1900@500 / 2-2.5t / 520-1750 / 1040 / 807 / 815 / 235 / 470 / 260 / 222 / 140 |
| TJ19R-A3 | 1900@500 / 2-2.5t / 470-1700 / 1040 / 770 / 815 / 230 / 645 / 324 / 275 / 272 |
| Model | Pressure value(Bar) / Flow value(L/min) |
| Least | Maximum / Lateral movement / Clamping action |
| Least | Recommend / Maximum / Least |
| TJ**R | 35 / 180 / 19 / 38 / 57 / 15 / 21 |
Gallery
All detail images published for this model.

TJ*** Forklift attachment, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
General handling
The machine is specified against the load, floor and working height.
The machine is specified against the load, floor and working height.
Selection starts from the load per move and the space around it.
This item belongs to the broader SUNRISE material handling catalogue.
Compare rated capacity against the heaviest single load you move. State any attachment required alongside the base model.
The specification sheet records TJ14S-A1: 1400@500 / 2-2.5t / 330-1550 / 1040 / 550 / 780 / 225 / 370 / 208 / 125 / 262; TJ14S-B1: 1900@500 / 3-4.5t / 330-1550 / 1040 / 625 / 960 / 225 / 395 / 208 / 125 / 262; TJ19S-A1: 1900@500 / 2-2.5t / 520-1750 / 1040 / 807 / 815 / 235 / 360 / 212 / 162 / 100; Model: Pressure value(Bar) / Flow value(L/min); Least: Maximum / Lateral movement / Clamping action; Least: Recommend / Maximum / Least.
The specification sheet records TJ**S: 35 / 160 / 4 / 11 / 21 / 15 / 38; TJ19R-A1 (Four barrels of Folder): 1900@500 / 2-2.5t / 470-1700 / 1040 / 800 / 814 / 785 / 326 / 382 / 275; TJ19R-A2 (two barrels of Folder): 1900@500 / 2-2.5t / 520-1750 / 1040 / 807 / 815 / 235 / 470 / 260 / 222 / 140; TJ19R-A3 (Four barrels of Folder): 1900@500 / 2-2.5t / 470-1700 / 1040 / 770 / 815 / 230 / 645 / 324 / 275 / 272; Model: Pressure value(Bar) / Flow value(L/min); Least: Maximum / Lateral movement / Clamping action.
The specification sheet records Least: Recommend / Maximum / Least; TJ**R: 35 / 180 / 19 / 38 / 57 / 15 / 21.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
The listed figures follow the record; options are confirmed on the quotation.
List the models that clear each constraint before asking for a quote.
Compare the lowered height against the lowest door on the route.
Compare capacity first, then the lift height the job actually needs.
Match the power arrangement to the shifts and the working environment.
On the TJ***, check the lowest door, beam height and aisle the truck has to pass through.
Measure the pallet footprint and the heaviest single load before comparing models.
On the TJ***, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
List the attachments required, such as clamps, sideshift or rotator.
On the TJ***, note any slope, threshold or step along the working route.
On the TJ***, loads are kept low while travelling between stations.
The working area is kept clear of loose packaging and obstacles.
On the TJ***, routine checks cover tyres, brakes, controls and visible leaks.
Unusual noise or movement is reported before further use.
On the TJ***, attachments such as clamps or rotators are matched to the load shape.
Storage cages and racking organise the loads it moves between stations.
On the TJ***, the receiving side pairs it with a dock ramp or platform where needed.
Related models in the same group are listed on the family page.
On the TJ***, any option not listed should be confirmed in writing before order.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the TJ***, capacity above the rated lift height follows the mast curve.
The specification sheet is the binding reference for listed values.
On the TJ***, the booking reference is issued with the proforma invoice.
The operation and parts material travel with the machine.
On the TJ***, documents issued for an order are listed in the quotation.
Wear parts are supplied after delivery against the parts manual.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.