Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

RJ** — Forklift attachment

RJ** Forklift attachment. Dimensions on the datasheet are checked against the site layout.

RJ** Forklift attachment — product photo 1 of 4

Ordering facts for the RJ**

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

RJ** specification

Values are copied from the source record in their original order and units.

RJ** specification table
ParameterValue
RJ19RT-A1800@500 / 445-1670 / 1-2.5t / 420 / 996 / 1040 / 796 / 580 / 198
RJ25RT-A12500@500 / 600-1880 / 2-2.5t / 460 / 1200 / 1010 / 769 / 750 / 259
RJ30RT-B12700@500 / 560-1850 / 3-4.5t / 460 / 1200 / 1010 / 769 / 750 / 259
ModelPressure value(Bar) / Flow value(L/min)
LeastMax / Lateral movement / Clamping action
LeastRecommend / Maximum / Least
RJ**RT35 / 180 / 19 / 26 / 38
ModelSpeed / Torque
RJ19RT3.5r/min@38L/min / 4200N.m@160Bar
RJ25RT3.5r/min@38L/min / 9000N.m@160Bar
RJ30RT3.5r/min@38L/min / 9000N.m@160Bar
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

RJ** Forklift attachment, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Site and warehouse work

This item belongs to the broader SUNRISE material handling catalogue.

This item belongs to the broader SUNRISE material handling catalogue.

Selection starts from the load per move and the space around it.

Each build is quoted line by line once the duty cycle is confirmed.

Match the tyre type to the floor surface rather than the price list. Confirm the charger voltage or fuel type for your destination country.

Specification walk-through

The specification sheet records RJ19RT-A1: 800@500 / 445-1670 / 1-2.5t / 420 / 996 / 1040 / 796 / 580 / 198; RJ25RT-A1: 2500@500 / 600-1880 / 2-2.5t / 460 / 1200 / 1010 / 769 / 750 / 259; RJ30RT-B1: 2700@500 / 560-1850 / 3-4.5t / 460 / 1200 / 1010 / 769 / 750 / 259; Model: Pressure value(Bar) / Flow value(L/min); Least: Max / Lateral movement / Clamping action; Least: Recommend / Maximum / Least.

The specification sheet records RJ**RT: 35 / 180 / 19 / 26 / 38; Model: Speed / Torque; RJ19RT: 3.5r/min@38L/min / 4200N.m@160Bar; RJ25RT: 3.5r/min@38L/min / 9000N.m@160Bar; RJ30RT: 3.5r/min@38L/min / 9000N.m@160Bar.

Rated figures apply at the standard load centre unless a row says otherwise.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

Units are copied as published; convert them only when comparing models.

How to specify the right build

Configuration follows the load, working height and site layout.

Send pallet size, door height and aisle width with the enquiry.

The enquiry should list any attachment the job requires.

Note any attachment that changes the load centre or the overall width.

Check the machine weight against floor loading where the site is raised.

Review the tyre type against the surface the machine will run on.

Compare capacity first, then the lift height the job actually needs.

  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • Mark the stations where loads are picked up and dropped off each shift.
  • List the load per move, lift height and floor surface before comparing models.

Site preparation and operating notes

On the RJ**, state the shifts per day so the power arrangement can be sized properly.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the RJ**, check headroom under beams, pipes and door frames along the route.

Check the lowest door, beam height and aisle the truck has to pass through.

On the RJ**, note any slope, threshold or step along the working route.

Operation and routine checks

On the RJ**, routine checks cover tyres, brakes, controls and visible leaks.

Attachments are secured before the machine leaves the station.

On the RJ**, the operator follows the rated capacity marked on the chassis.

The operator checks load stability before each lift or move.

How this model fits the operation

On the RJ**, spare parts for wear items follow the parts manual after delivery.

The layout drawing shows where each machine sits in the operation.

On the RJ**, a mixed enquiry can list this model together with other families.

This machine usually works alongside pallet trucks and stacking equipment.

Working conditions and honest limits

On the RJ**, attachments are quoted separately once the base chassis is fixed.

The specification sheet is the binding reference for listed values.

On the RJ**, any option not listed should be confirmed in writing before order.

Tyre choice should match the floor rather than the price list.

Delivery, documents and support

On the RJ**, packing follows sea-freight practice for the chosen chassis.

Wear parts are supplied after delivery against the parts manual.

On the RJ**, quotations follow the model, listed specification and destination port.

Quote the serial number and component name when ordering spares.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

Ask for the specific certificate required for your target country.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
ST880X———Manual pallet jack duty

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.