Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

TFY75 — lift table

TFY75 Air/Hyd.table truck, rated capacity 750Kg. They reduce bending and manual lifting at packing stations and docks.

TFY75 lift table — product photo 1 of 1

Ordering facts for the TFY75

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

TFY75 specification

Values are copied from the source record in their original order and units.

TFY75 specification table
ParameterValue
ModelTFY75
Load Capacity750 kg
Lowest Height360 mm
Max. Height1000 mm
Table Dimensions1000×512×55 mm
Total Length1170 mm
Length of Handle1020 mm
Net Weight116 kg
Request price Datasheet (print / save as PDF) Ask about configuration

What this model is built to do

TFY75 Air/Hyd.table truck, part of the Lift tables line.

Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.

Ergonomic load positioning

Published figures for this build: rated capacity 750 kg.

Scissor mechanisms carry the load vertically, with hydraulic or electric drive.

Lowered height decides how a pallet can be driven onto the deck.

Lowered height decides how a pallet can be driven onto the deck.

Scissor mechanisms carry the load vertically, with hydraulic or electric drive.

State any attachment required alongside the base model. Confirm the charger voltage or fuel type for your destination country.

Specification walk-through

The specification sheet records Model: TFY75; Load Capacity (kg): 750 kg; Lowest Height (mm): 360 mm; Max. Height (mm): 1000 mm; Table Dimensions (mm): 1000×512×55 mm; Total Length (mm): 1170 mm.

The specification sheet records Length of Handle (mm): 1020 mm; Net Weight (kg): 116 kg.

Rated figures apply at the standard load centre unless a row says otherwise.

Options and attachments are listed separately from the base chassis.

An em dash marks a value the source record did not publish.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

Send pallet size, door height and aisle width with the enquiry.

Match the power arrangement to the shifts and the working environment.

Compare capacity first, then the lift height the job actually needs.

Review the tyre type against the surface the machine will run on.

Note any attachment that changes the load centre or the overall width.

  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.

Site preparation and operating notes

On the TFY75, keep the charging or refuelling position clear of the main traffic aisle.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the TFY75, check headroom under beams, pipes and door frames along the route.

Note any slope, threshold or step along the working route.

On the TFY75, state the shifts per day so the power arrangement can be sized properly.

Operation and routine checks

On the TFY75, unusual noise or movement is reported before further use.

Loads are kept low while travelling between stations.

On the TFY75, battery or fuel levels are checked at the start of each shift.

Routine checks cover tyres, brakes, controls and visible leaks.

How this model fits the operation

On the TFY75, attachments such as clamps or rotators are matched to the load shape.

Related models in the same group are listed on the family page.

On the TFY75, a mixed enquiry can list this model together with other families.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the TFY75, any option not listed should be confirmed in writing before order.

Tyre choice should match the floor rather than the price list.

On the TFY75, capacity above the rated lift height follows the mast curve.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the TFY75, the enquiry should include the quantity and destination port.

Mixed equipment can be listed on one enquiry.

On the TFY75, wear parts are supplied after delivery against the parts manual.

Quote the serial number and component name when ordering spares.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

The serial number identifies the build when parts are ordered later.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What load does the TFY75 carry?+

The listed rated capacity is 750Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What is the machine weight?+

The listed service or net weight is 116 kg. This matters for floor loading, ramps and container plans.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Lift tables related models

ModelCapacityLiftPowerTypical use
TF15150——Press and bench lifting
TF30———Production cell feeding
TF75———Hydraulic pallet raising
TF35D350——Ergonomic load positioning
TF10100——Work positioning at height

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.