CZ Plastic Pallet. Beam, shelving and cage layouts follow pallet size and aisle height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| L | W / H |
| CZ1311-D | 1300 / 1100 / 170 / 5000 / 1200 |
| CZ1212-D | 1200 / 170 / 4000 / 1000 |
| CZ1210-X | 1200 / 1000 / 170 / 4000 |
| CZ1208-X | 1200 / 800 / 170 / 4000 / 1000 |
| L | W / H |
| CZ1311-X | 1300 / 1100 / 150 / 4000 / 1000 |
| CZ1211-L | 1200 / 1100 / 150 / 4000 / 1000 |
| CZ1210-X1 | 1200 / 1000 / 150 / 4000 |
| CZ1111-X | 1100 / 160 / 4000 / 1000 |
| L | W / H |
| CZ1210-A | 1200 / 1000 / 150 / 3000 |
| CZ1111-A | 1100 / 150 / 3000 / 1000 |
| L | W / H |
| CZ1411-D | 1400 / 1100 / 175 / 5000 / 1200 |
| CZ1311-D | 1300 / 1100 / 175 / 5000 / 1200 |
| CZ1211-D | 1200 / 1100 / 175 / 5000 |
| CZ1210-R | 1200 / 1000 / 190 / 5000 |
| CZ1210-A1 | 1200 / 1000 / 160 / 5000 / 1500 |
| CZ1208-D | 1200 / 800 / 175 / 4000 / 1000 |
| CZ1108-D | 1100 / 800 / 175 / 4000 / 1000 |
| CZ1008-D | 1000 / 800 / 175 / 4000 |
| L | W / H |
| CZJ1210-X | 1200 / 1000 / 165 / 4000 |
| CZJ1210-N | 1200 / 1000 / 160 / 3000 / 700 |
| CZJ1208-N | 1200 / 800 / 160 / 3000 / 700 |
| L | W / H |
| CP1412-W | 1400 / 1200 / 165 / 4000 |
| CP1411-W | 1400 / 1100 / 165 / 4000 / 1200 |
| CP1311-W | 1300 / 1100 / 165 / 4000 / 1200 |
| CP1212-W | 1200 / 165 / 4000 |
| CP1210-W | 1200 / 1000 / 165 / 4000 |
| CP1111-W | 1100 / 165 / 4000 / 1200 |
| CP1010-W | 1000 / 165 / 4000 |
| CP1208-W | 1200 / 800 / 160 / 4000 / 1000 |
Gallery
All detail images published for this model.









CZ Plastic Pallet, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Racking organisation
Systems are drawn to building dimensions before any truck is ordered.
Load beams are spaced to the pallet depth and stacking height.
The storage layout sets the aisle width the truck must enter.
Beam, shelving and cage layouts follow pallet size and aisle height.
Note cold store, outdoor gradient or container entry as a constraint. Match the tyre type to the floor surface rather than the price list.
The specification sheet records L: W / H; CZ1311-D: 1300 / 1100 / 170 / 5000 / 1200; CZ1212-D: 1200 / 170 / 4000 / 1000; CZ1210-X: 1200 / 1000 / 170 / 4000; CZ1208-X: 1200 / 800 / 170 / 4000 / 1000; L: W / H.
The specification sheet records CZ1311-X: 1300 / 1100 / 150 / 4000 / 1000; CZ1211-L: 1200 / 1100 / 150 / 4000 / 1000; CZ1210-X1: 1200 / 1000 / 150 / 4000; CZ1111-X: 1100 / 160 / 4000 / 1000; L: W / H; CZ1210-A: 1200 / 1000 / 150 / 3000.
The specification sheet records CZ1111-A: 1100 / 150 / 3000 / 1000; L: W / H; CZ1411-D: 1400 / 1100 / 175 / 5000 / 1200; CZ1311-D: 1300 / 1100 / 175 / 5000 / 1200; CZ1211-D: 1200 / 1100 / 175 / 5000; CZ1210-R: 1200 / 1000 / 190 / 5000.
The specification sheet records CZ1210-A1: 1200 / 1000 / 160 / 5000 / 1500; CZ1208-D: 1200 / 800 / 175 / 4000 / 1000; CZ1108-D: 1100 / 800 / 175 / 4000 / 1000; CZ1008-D: 1000 / 800 / 175 / 4000; L: W / H; CZJ1210-X: 1200 / 1000 / 165 / 4000.
The specification sheet records CZJ1210-N: 1200 / 1000 / 160 / 3000 / 700; CZJ1208-N: 1200 / 800 / 160 / 3000 / 700; L: W / H; CP1412-W: 1400 / 1200 / 165 / 4000; CP1411-W: 1400 / 1100 / 165 / 4000 / 1200; CP1311-W: 1300 / 1100 / 165 / 4000 / 1200.
The specification sheet records CP1212-W: 1200 / 165 / 4000; CP1210-W: 1200 / 1000 / 165 / 4000; CP1111-W: 1100 / 165 / 4000 / 1200; CP1010-W: 1000 / 165 / 4000; CP1208-W: 1200 / 800 / 160 / 4000 / 1000.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
The listed figures follow the record; options are confirmed on the quotation.
Note any attachment that changes the load centre or the overall width.
Review the tyre type against the surface the machine will run on.
Compare capacity first, then the lift height the job actually needs.
Check the machine weight against floor loading where the site is raised.
On the CZ, keep the charging or refuelling position clear of the main traffic aisle.
State the shifts per day so the power arrangement can be sized properly.
On the CZ, check the lowest door, beam height and aisle the truck has to pass through.
Check headroom under beams, pipes and door frames along the route.
On the CZ, note any slope, threshold or step along the working route.
On the CZ, battery or fuel levels are checked at the start of each shift.
The operator checks load stability before each lift or move.
On the CZ, loads are kept low while travelling between stations.
Unusual noise or movement is reported before further use.
On the CZ, a mixed enquiry can list this model together with other families.
The receiving side pairs it with a dock ramp or platform where needed.
On the CZ, spare parts for wear items follow the parts manual after delivery.
The layout drawing shows where each machine sits in the operation.
On the CZ, dimensions are checked against the source record before quoting.
The signed datasheet issued with the quotation is the binding version.
On the CZ, tyre choice should match the floor rather than the price list.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the CZ, wear parts are supplied after delivery against the parts manual.
Loading is recorded before the container is sealed.
On the CZ, documents issued for an order are listed in the quotation.
The enquiry should include the quantity and destination port.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.