Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

ZJ** — Forklift attachment

ZJ** Forklift attachment. Selection starts from the load per move and the space around it.

ZJ** Forklift attachment — product photo 1 of 5

Ordering facts for the ZJ**

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

ZJ** specification

Values are copied from the source record in their original order and units.

ZJ** specification table
ParameterValue
ZJ12R-A11300@1300 / 1-2.5t / 410-1300 / 782 / 575 / 50 / 340 / 255 / 135 / 342
ZJ13R-A11500@1150 / 1-2.5t / 330-1150 / 740 / 510 / 50 / 335 / 250 / 135 / 325
ZJ20R-A12000@1400 / 2-2.5t / 500-1400 / 935 / 635 / 50 / 340 / 405 / 240 / 705
ZJ20R-A32000@1340 / 2-2.5t / 630-1340 / 831 / 589 / 50 / 340 / 325 / 240 / 738
ZJ20R-A52000@1600 / 2-2.5t / 600-1600 / 1012 / 817 / 50 / 350 / 385 / 240 / 875
ZJ20R-A72000@1830 / 2-2.5t / 680-1830 / 1147 / 980 / 50 / 405 / 373 / 240 / 920
ZJ20R-B12000@1400 / 3-4.5t / 500-1400 / 935 / 635 / 50 / 340 / 405 / 240 / 710
ZJ20R-B32000@1340 / 3-4.5t / 630-1340 / 831 / 589 / 50 / 340 / 325 / 240 / 738
ZJ20R-B52000@1600 / 3-4.5t / 600-1600 / 1012 / 817 / 50 / 350 / 385 / 240 / 875
ZJ20R-B72000@1830 / 3-4.5t / 680-1830 / 1147 / 980 / 50 / 405 / 373 / 240 / 920
ZJ35R-C13500@1520 / 5-7t / 610-1520 / 1051 / 720 / 65 / 405 / 373 / 283 / 1240
ModelPressure value ( Bar ) / Flow value ( Bar )
LeastMaximum / Rotary Action / Clamping action
LeastRecommend / Maximum / Least
ZJ12/13R35 / 180 / 19 / 26 / 38
ZJ20R35 / 180 / 19 / 38 / 57
ZJ35R35 / 180 / 19 / 38 / 57
ModelSpeed
ZJ12/13R7.5r/min@38L/min / 4200N.m@160Bar
ZJ20R5.2r/min@57L/min / 9000N.m@160Bar
ZJ35R4.1r/min@57L/min / 11000N.m@160Bar
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

ZJ** Forklift attachment, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Hand and trolley duties

Each build is quoted line by line once the duty cycle is confirmed.

Selection starts from the load per move and the space around it.

The machine is specified against the load, floor and working height.

Each build is quoted line by line once the duty cycle is confirmed.

Compare rated capacity against the heaviest single load you move. State any attachment required alongside the base model.

Specification walk-through

The specification sheet records ZJ12R-A1: 1300@1300 / 1-2.5t / 410-1300 / 782 / 575 / 50 / 340 / 255 / 135 / 342; ZJ13R-A1: 1500@1150 / 1-2.5t / 330-1150 / 740 / 510 / 50 / 335 / 250 / 135 / 325; ZJ20R-A1: 2000@1400 / 2-2.5t / 500-1400 / 935 / 635 / 50 / 340 / 405 / 240 / 705; ZJ20R-A3: 2000@1340 / 2-2.5t / 630-1340 / 831 / 589 / 50 / 340 / 325 / 240 / 738; ZJ20R-A5: 2000@1600 / 2-2.5t / 600-1600 / 1012 / 817 / 50 / 350 / 385 / 240 / 875; ZJ20R-A7: 2000@1830 / 2-2.5t / 680-1830 / 1147 / 980 / 50 / 405 / 373 / 240 / 920.

The specification sheet records ZJ20R-B1: 2000@1400 / 3-4.5t / 500-1400 / 935 / 635 / 50 / 340 / 405 / 240 / 710; ZJ20R-B3: 2000@1340 / 3-4.5t / 630-1340 / 831 / 589 / 50 / 340 / 325 / 240 / 738; ZJ20R-B5: 2000@1600 / 3-4.5t / 600-1600 / 1012 / 817 / 50 / 350 / 385 / 240 / 875; ZJ20R-B7: 2000@1830 / 3-4.5t / 680-1830 / 1147 / 980 / 50 / 405 / 373 / 240 / 920; ZJ35R-C1: 3500@1520 / 5-7t / 610-1520 / 1051 / 720 / 65 / 405 / 373 / 283 / 1240; Model: Pressure value ( Bar ) / Flow value ( Bar ).

The specification sheet records Least: Maximum / Rotary Action / Clamping action; Least: Recommend / Maximum / Least; ZJ12/13R: 35 / 180 / 19 / 26 / 38; ZJ20R: 35 / 180 / 19 / 38 / 57; ZJ35R: 35 / 180 / 19 / 38 / 57; Model: Speed.

The specification sheet records ZJ12/13R: 7.5r/min@38L/min / 4200N.m@160Bar; ZJ20R: 5.2r/min@57L/min / 9000N.m@160Bar; ZJ35R: 4.1r/min@57L/min / 11000N.m@160Bar.

Those missing values can be requested directly through the enquiry form.

Rated figures apply at the standard load centre unless a row says otherwise.

Units are copied as published; convert them only when comparing models.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

Send pallet size, door height and aisle width with the enquiry.

Measure the pallet footprint before the chassis is shortlisted.

Check the machine weight against floor loading where the site is raised.

Review the tyre type against the surface the machine will run on.

Match the power arrangement to the shifts and the working environment.

Compare the lowered height against the lowest door on the route.

  • State the shifts per day so the power arrangement can be sized properly.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • List the load per move, lift height and floor surface before comparing models.

Site preparation and operating notes

On the ZJ**, check headroom under beams, pipes and door frames along the route.

List the attachments required, such as clamps, sideshift or rotator.

On the ZJ**, keep the charging or refuelling position clear of the main traffic aisle.

Note any slope, threshold or step along the working route.

On the ZJ**, mark the stations where loads are picked up and dropped off each shift.

Operation and routine checks

On the ZJ**, the operator follows the rated capacity marked on the chassis.

The working area is kept clear of loose packaging and obstacles.

On the ZJ**, loads are kept low while travelling between stations.

Unusual noise or movement is reported before further use.

How this model fits the operation

On the ZJ**, a mixed enquiry can list this model together with other families.

The receiving side pairs it with a dock ramp or platform where needed.

On the ZJ**, spare parts for wear items follow the parts manual after delivery.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the ZJ**, capacity above the rated lift height follows the mast curve.

The signed datasheet issued with the quotation is the binding version.

On the ZJ**, site conditions such as gradient, dust and moisture belong in the enquiry.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the ZJ**, the booking reference is issued with the proforma invoice.

Mixed equipment can be listed on one enquiry.

On the ZJ**, quotations follow the model, listed specification and destination port.

The enquiry should include the quantity and destination port.

The operation material covers controls, checks and routine service points.

The serial number identifies the build when parts are ordered later.

Test and conformity documents follow the model and destination market.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
ST880X———Manual pallet jack duty

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.