Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

LEP-16 / LEP-18 / LEP-20A — pallet truck

LEP-16 / LEP-18 / LEP-20A Electric Pallet Truck. Hand and powered pallet trucks are the first dock unloading tool.

LEP-16 / LEP-18 / LEP-20A pallet truck — product photo 1 of 2

Ordering facts for the LEP-16 / LEP-18 / LEP-20A

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

LEP-16 / LEP-18 / LEP-20A specification

Values are copied from the source record in their original order and units.

LEP-16 / LEP-18 / LEP-20A specification table
ParameterValue
ModelLEP-16 / LEP-18 / LEP-20A
Driving styleWalkie / Rider
Load capacity Q1600/1800/2000 kg
Load center C600 mm
Overall length L1/1730(1810) mm
Overall width W710 mm
Overall height H11320 mm
Fork dimension L×b×m1150/1200×160×50 mm
Outside width of forks D540/630, 540/680 mm
Ground clearance x30 mm
Base distance L01350 mm
Wheel materialPU
Driving wheel sizeΦ250×80 mm
Front wheel sizeΦ70×70, Φ78×70 mm
Balance wheel sizeΦ75×35, Φ100×40 mm
Min. steering radius Wa1465, 1550 mm
Min. width of aisle Ast1865, 1950 mm
Min. height of forks G75/85 mm
Max. height of forks H205 mm
Max. spee3.0/3.5, 4.0/5.0
Gradeability5 %
Brake typeElectromagnetic
Power of driving motor0.7/1.2 kw
Power of lift motor0.8 kw
Electric controllerCurtis 1207B
Battery capacity/voltageAh/ V / 95/24, 135/24
Weight of battery51/105 kg
Net weight235/268 kg
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

LEP-16 / LEP-18 / LEP-20A Electric Pallet Truck, part of the Pallet trucks line.

Hand, semi-electric and powered pallet trucks for horizontal pallet transport.

Warehouse replenishment

Published figures for this build: rated capacity 1600/1800/2000 kg, overall width 710 mm, turning radius 1865, 1950 mm.

Hand versions keep a simple hydraulic pump for short repeated moves.

Short floor transport between dock and store is the usual duty.

Short floor transport between dock and store is the usual duty.

Hand and powered pallet trucks are the first dock unloading tool.

Confirm the aisle width against the pallet depth before choosing a chassis. Match the tyre type to the floor surface rather than the price list.

Specification walk-through

The specification sheet records Model: LEP-16 / LEP-18 / LEP-20A; Driving style: Walkie / Rider; Load capacity Q (kg): 1600/1800/2000 kg; Load center C (mm): 600 mm; Overall length L1 (mm): /1730(1810) mm; Overall width W (mm): 710 mm.

The specification sheet records Overall height H1 (mm): 1320 mm; Fork dimension L×b×m (mm): 1150/1200×160×50 mm; Outside width of forks D (mm): 540/630, 540/680 mm; Ground clearance x (mm): 30 mm; Base distance L0 (mm): 1350 mm; Wheel material: PU.

The specification sheet records Driving wheel size (mm): Φ250×80 mm; Front wheel size (mm): Φ70×70, Φ78×70 mm; Balance wheel size (mm): Φ75×35, Φ100×40 mm; Min. steering radius Wa (mm): 1465, 1550 mm; Min. width of aisle Ast (mm): 1865, 1950 mm; Min. height of forks G (mm): 75/85 mm.

The specification sheet records Max. height of forks H (mm): 205 mm; Max. spee (laden/unladen): 3.0/3.5, 4.0/5.0; Gradeability (%): 5 %; Brake type: Electromagnetic; Power of driving motor (kw): 0.7/1.2 kw; Power of lift motor (kw): 0.8 kw.

The specification sheet records Electric controller: Curtis 1207B; Battery capacity/voltage: Ah/ V / 95/24, 135/24; Weight of battery (kg): 51/105 kg; Net weight (without battery): 235/268 kg.

An em dash marks a value the source record did not publish.

Options and attachments are listed separately from the base chassis.

Rated figures apply at the standard load centre unless a row says otherwise.

Each row in the table keeps the label and value from the source record.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

The enquiry should list any attachment the job requires.

Note any attachment that changes the load centre or the overall width.

Match the power arrangement to the shifts and the working environment.

Check the chassis width against the aisle and the container door.

Compare the lowered height against the lowest door on the route.

  • List the load per move, lift height and floor surface before comparing models.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the LEP-16 / LEP-18 / LEP-20A, check headroom under beams, pipes and door frames along the route.

List the attachments required, such as clamps, sideshift or rotator.

On the LEP-16 / LEP-18 / LEP-20A, mark the stations where loads are picked up and dropped off each shift.

Keep the charging or refuelling position clear of the main traffic aisle.

On the LEP-16 / LEP-18 / LEP-20A, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Operation and routine checks

On the LEP-16 / LEP-18 / LEP-20A, unusual noise or movement is reported before further use.

The working area is kept clear of loose packaging and obstacles.

On the LEP-16 / LEP-18 / LEP-20A, attachments are secured before the machine leaves the station.

The operator checks load stability before each lift or move.

How this model fits the operation

On the LEP-16 / LEP-18 / LEP-20A, this machine usually works alongside pallet trucks and stacking equipment.

Attachments such as clamps or rotators are matched to the load shape.

On the LEP-16 / LEP-18 / LEP-20A, the receiving side pairs it with a dock ramp or platform where needed.

Spare parts for wear items follow the parts manual after delivery.

Working conditions and honest limits

On the LEP-16 / LEP-18 / LEP-20A, attachments are quoted separately once the base chassis is fixed.

Capacity above the rated lift height follows the mast curve.

On the LEP-16 / LEP-18 / LEP-20A, the signed datasheet issued with the quotation is the binding version.

Dimensions are checked against the source record before quoting.

Delivery, documents and support

On the LEP-16 / LEP-18 / LEP-20A, the booking reference is issued with the proforma invoice.

Loading is recorded before the container is sealed.

On the LEP-16 / LEP-18 / LEP-20A, the enquiry should include the quantity and destination port.

Documents issued for an order are listed in the quotation.

The parts manual lists the wear items and their reference views.

Test and conformity documents follow the model and destination market.

The serial number identifies the build when parts are ordered later.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

What load centre applies to the rating?+

The specification lists a load centre of 600 mm. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Pallet trucks related models

ModelCapacityLiftPowerTypical use
AC20———Horizontal pallet transport
DF20———Container pallet stripping
CBY-5.0T5000 kg——Floor pallet moving
CBY-CW———Short internal runs
LEP-15E———Container pallet stripping

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.