Mid duty racks Racking System. Load beams are spaced to the pallet depth and stacking height.

Specification
The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.
Gallery
All detail images published for this model.



Mid duty racks Racking System, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Bulk-goods positions
The storage layout sets the aisle width the truck must enter.
Racking and systems organise pallet and carton positions inside a warehouse.
Racking and systems organise pallet and carton positions inside a warehouse.
Beam, shelving and cage layouts follow pallet size and aisle height.
Confirm the aisle width against the pallet depth before choosing a chassis. Compare rated capacity against the heaviest single load you move.
The published parameters for this build are listed in the specification table.
Items the source record did not publish are shown as an em dash in the table.
Those missing items can be asked for directly through the enquiry form.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Measure the pallet footprint before the chassis is shortlisted.
Note any attachment that changes the load centre or the overall width.
Compare capacity first, then the lift height the job actually needs.
Check the chassis width against the aisle and the container door.
List the models that clear each constraint before asking for a quote.
On the Mid duty racks, note any slope, threshold or step along the working route.
State the shifts per day so the power arrangement can be sized properly.
On the Mid duty racks, measure the pallet footprint and the heaviest single load before comparing models.
Keep the charging or refuelling position clear of the main traffic aisle.
On the Mid duty racks, check headroom under beams, pipes and door frames along the route.
On the Mid duty racks, the working area is kept clear of loose packaging and obstacles.
Battery or fuel levels are checked at the start of each shift.
On the Mid duty racks, the operator follows the rated capacity marked on the chassis.
Attachments are secured before the machine leaves the station.
On the Mid duty racks, storage cages and racking organise the loads it moves between stations.
Attachments such as clamps or rotators are matched to the load shape.
On the Mid duty racks, this machine usually works alongside pallet trucks and stacking equipment.
A mixed enquiry can list this model together with other families.
On the Mid duty racks, attachments are quoted separately once the base chassis is fixed.
The signed datasheet issued with the quotation is the binding version.
On the Mid duty racks, capacity above the rated lift height follows the mast curve.
Any option not listed should be confirmed in writing before order.
On the Mid duty racks, quotations follow the model, listed specification and destination port.
The booking reference is issued with the proforma invoice.
On the Mid duty racks, documents issued for an order are listed in the quotation.
The enquiry should include the quantity and destination port.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.