Logistic Roll Container LRC05 Logistic Roll Container LRC05. Racking and systems organise pallet and carton positions inside a warehouse.

Specification
The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.
Logistic Roll Container LRC05 Logistic Roll Container LRC05, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Pallet and bulk storage
Access floor space and column lines are checked against the design.
Access floor space and column lines are checked against the design.
Load beams are spaced to the pallet depth and stacking height.
The storage layout sets the aisle width the truck must enter.
Check closed mast or chassis height against the lowest door on the route. Describe the shifts per day when the power arrangement is selected.
The published parameters for this build are listed in the specification table.
Items the source record did not publish are shown as an em dash in the table.
Those missing items can be asked for directly through the enquiry form.
Those missing values can be requested directly through the enquiry form.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Door and beam heights decide which mast will clear the route.
Check the chassis width against the aisle and the container door.
List the models that clear each constraint before asking for a quote.
Review the tyre type against the surface the machine will run on.
Check the machine weight against floor loading where the site is raised.
On the Logistic Roll Container LRC05, list the attachments required, such as clamps, sideshift or rotator.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the Logistic Roll Container LRC05, send photographs of the racking and the existing working area when possible.
State the shifts per day so the power arrangement can be sized properly.
On the Logistic Roll Container LRC05, check headroom under beams, pipes and door frames along the route.
On the Logistic Roll Container LRC05, the operator follows the rated capacity marked on the chassis.
Unusual noise or movement is reported before further use.
On the Logistic Roll Container LRC05, the operator checks load stability before each lift or move.
Battery or fuel levels are checked at the start of each shift.
On the Logistic Roll Container LRC05, this machine usually works alongside pallet trucks and stacking equipment.
The receiving side pairs it with a dock ramp or platform where needed.
On the Logistic Roll Container LRC05, a mixed enquiry can list this model together with other families.
Storage cages and racking organise the loads it moves between stations.
On the Logistic Roll Container LRC05, tyre choice should match the floor rather than the price list.
Capacity above the rated lift height follows the mast curve.
On the Logistic Roll Container LRC05, attachments are quoted separately once the base chassis is fixed.
The specification sheet is the binding reference for listed values.
On the Logistic Roll Container LRC05, loading is recorded before the container is sealed.
Wear parts are supplied after delivery against the parts manual.
On the Logistic Roll Container LRC05, the enquiry should include the quantity and destination port.
The booking reference is issued with the proforma invoice.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.