Logistic roll containe LRC09 Logistic roll containe LRC09. Racking and systems organise pallet and carton positions inside a warehouse.

Specification
The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.
Logistic roll containe LRC09 Logistic roll containe LRC09, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Bulk-goods positions
Beam, shelving and cage layouts follow pallet size and aisle height.
The storage layout sets the aisle width the truck must enter.
Systems are drawn to building dimensions before any truck is ordered.
Beam, shelving and cage layouts follow pallet size and aisle height.
Describe the shifts per day when the power arrangement is selected. Compare rated capacity against the heaviest single load you move.
The published parameters for this build are listed in the specification table.
Items the source record did not publish are shown as an em dash in the table.
Those missing items can be asked for directly through the enquiry form.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Measure the pallet footprint before the chassis is shortlisted.
Note any attachment that changes the load centre or the overall width.
Compare capacity first, then the lift height the job actually needs.
Check the machine weight against floor loading where the site is raised.
List the models that clear each constraint before asking for a quote.
On the Logistic roll containe LRC09, check the lowest door, beam height and aisle the truck has to pass through.
Mark the stations where loads are picked up and dropped off each shift.
On the Logistic roll containe LRC09, check headroom under beams, pipes and door frames along the route.
Send photographs of the racking and the existing working area when possible.
On the Logistic roll containe LRC09, list the attachments required, such as clamps, sideshift or rotator.
On the Logistic roll containe LRC09, loads are kept low while travelling between stations.
Attachments are secured before the machine leaves the station.
On the Logistic roll containe LRC09, the operator checks load stability before each lift or move.
The operator follows the rated capacity marked on the chassis.
On the Logistic roll containe LRC09, related models in the same group are listed on the family page.
The receiving side pairs it with a dock ramp or platform where needed.
On the Logistic roll containe LRC09, storage cages and racking organise the loads it moves between stations.
The layout drawing shows where each machine sits in the operation.
On the Logistic roll containe LRC09, the specification sheet is the binding reference for listed values.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the Logistic roll containe LRC09, the signed datasheet issued with the quotation is the binding version.
Tyre choice should match the floor rather than the price list.
On the Logistic roll containe LRC09, mixed equipment can be listed on one enquiry.
Wear parts are supplied after delivery against the parts manual.
On the Logistic roll containe LRC09, documents issued for an order are listed in the quotation.
Loading is recorded before the container is sealed.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.