Logistic roll containe LRC08 Logistic roll containe LRC08. The storage layout sets the aisle width the truck must enter.

Specification
The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.
Logistic roll containe LRC08 Logistic roll containe LRC08, part of the Storage systems line.
Racking, wire mesh containers, pallets and decking for pallet and bulk-goods storage.
Warehouse stocking
Load beams are spaced to the pallet depth and stacking height.
Systems are drawn to building dimensions before any truck is ordered.
The storage layout sets the aisle width the truck must enter.
Beam, shelving and cage layouts follow pallet size and aisle height.
Confirm the aisle width against the pallet depth before choosing a chassis. State any attachment required alongside the base model.
The published parameters for this build are listed in the specification table.
Items the source record did not publish are shown as an em dash in the table.
Those missing items can be asked for directly through the enquiry form.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
Dimensions in the table come from the source record.
Review the tyre type against the surface the machine will run on.
Compare capacity first, then the lift height the job actually needs.
Check the chassis width against the aisle and the container door.
Match the power arrangement to the shifts and the working environment.
On the Logistic roll containe LRC08, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check headroom under beams, pipes and door frames along the route.
On the Logistic roll containe LRC08, note any slope, threshold or step along the working route.
State the shifts per day so the power arrangement can be sized properly.
On the Logistic roll containe LRC08, measure the pallet footprint and the heaviest single load before comparing models.
On the Logistic roll containe LRC08, the operator checks load stability before each lift or move.
Unusual noise or movement is reported before further use.
On the Logistic roll containe LRC08, routine checks cover tyres, brakes, controls and visible leaks.
The operator follows the rated capacity marked on the chassis.
On the Logistic roll containe LRC08, attachments such as clamps or rotators are matched to the load shape.
Storage cages and racking organise the loads it moves between stations.
On the Logistic roll containe LRC08, the receiving side pairs it with a dock ramp or platform where needed.
Spare parts for wear items follow the parts manual after delivery.
On the Logistic roll containe LRC08, capacity above the rated lift height follows the mast curve.
The specification sheet is the binding reference for listed values.
On the Logistic roll containe LRC08, the signed datasheet issued with the quotation is the binding version.
Any option not listed should be confirmed in writing before order.
On the Logistic roll containe LRC08, the booking reference is issued with the proforma invoice.
Quote the serial number and component name when ordering spares.
On the Logistic roll containe LRC08, loading is recorded before the container is sealed.
The enquiry should include the quantity and destination port.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.