Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

ETW41000 — lift table

ETW41000 Electric lift table, rated capacity 1000Kg. Scissor mechanisms carry the load vertically, with hydraulic or electric drive.

ETW41000 lift table — product photo 1 of 1

Ordering facts for the ETW41000

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

ETW41000 specification

Values are copied from the source record in their original order and units.

ETW41000 specification table
ParameterUnitETW41000ETW41500
Model—ETW41000ETW41500
Load Capacitykg1000 kg
Lowest Heightmm9001080
Max. Heightmm40005000
Table Dimensionsmm2000×20003000×2000
Net Weightkg13902450
Request price Datasheet (print / save as PDF) Ask about voltage

What this model is built to do

ETW41000 Electric lift table, part of the Lift tables line.

Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.

Production cell feeding

Published figures for this build: rated capacity 1000 kg.

Table size matches the pallet footprint and the load per cycle.

Lift tables raise a pallet or work piece to a comfortable height.

Table size matches the pallet footprint and the load per cycle.

Lift tables raise a pallet or work piece to a comfortable height.

Confirm the charger voltage or fuel type for your destination country. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records Model: ETW41000 / ETW41500; Load Capacity (kg): 1000 kg; Lowest Height (mm): 900 / 1080; Max. Height (mm): 4000 / 5000; Table Dimensions (mm): 2000×2000 / 3000×2000; Net Weight (kg): 1390 / 2450.

Remaining parameters are listed row by row in the specification table.

Each row in the table keeps the label and value from the source record.

Rated figures apply at the standard load centre unless a row says otherwise.

An em dash marks a value the source record did not publish.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

Measure the pallet footprint before the chassis is shortlisted.

The listed figures follow the record; options are confirmed on the quotation.

Check the machine weight against floor loading where the site is raised.

Match the power arrangement to the shifts and the working environment.

Review the tyre type against the surface the machine will run on.

Check the chassis width against the aisle and the container door.

  • List attachments such as clamps, sideshift or rotator separately.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the ETW41000, check the lowest door, beam height and aisle the truck has to pass through.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the ETW41000, list the attachments required, such as clamps, sideshift or rotator.

Measure the pallet footprint and the heaviest single load before comparing models.

On the ETW41000, check headroom under beams, pipes and door frames along the route.

Operation and routine checks

On the ETW41000, loads are kept low while travelling between stations.

The operator follows the rated capacity marked on the chassis.

On the ETW41000, routine checks cover tyres, brakes, controls and visible leaks.

Unusual noise or movement is reported before further use.

How this model fits the operation

On the ETW41000, related models in the same group are listed on the family page.

Storage cages and racking organise the loads it moves between stations.

On the ETW41000, a mixed enquiry can list this model together with other families.

The layout drawing shows where each machine sits in the operation.

Working conditions and honest limits

On the ETW41000, the signed datasheet issued with the quotation is the binding version.

Capacity above the rated lift height follows the mast curve.

On the ETW41000, the specification sheet is the binding reference for listed values.

Dimensions are checked against the source record before quoting.

Delivery, documents and support

On the ETW41000, mixed equipment can be listed on one enquiry.

Packing follows sea-freight practice for the chosen chassis.

On the ETW41000, quotations follow the model, listed specification and destination port.

Loading is recorded before the container is sealed.

Ask for the specific certificate required for your target country.

Test and conformity documents follow the model and destination market.

The serial number identifies the build when parts are ordered later.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What load does the ETW41000 carry?+

The listed rated capacity is 1000Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Lift tables related models

ModelCapacityLiftPowerTypical use
TF15150——Press and bench lifting
TF30———Production cell feeding
TF75———Hydraulic pallet raising
TF35D350——Ergonomic load positioning
TF10100——Work positioning at height

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.