Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

CJ*** — Forklift attachment

CJ*** Forklift attachment. This item belongs to the broader SUNRISE material handling catalogue.

CJ*** Forklift attachment — product photo 1 of 3

Ordering facts for the CJ***

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

CJ*** specification

Values are copied from the source record in their original order and units.

CJ*** specification table
ParameterValue
CJ16G-A11600 @600 / 1-2.5t / 1040 / 400-1625 / 1070 / 740 / 28 / 35 / 100 / 155 / 170 / 167 / 326
CJ16G-A21600 @600 / 1-2.5t / 1040 / 400-1625 / 1220 / 740 / 28 / 35 / 100 / 161 / 170 / 167 / 295
CJ23G-B12300 @600 / 3-4.5t / 1010 / 440-1785 / 1070 / 738 / 28 / 45 / 125 / 214 / 163 / 184 / 450
CJ23G-B22300 @500 / 3-4.5t / 1010 / 410-1780 / 1070 / 796 / 24 / 50 / 150 / 323 / 164 / 318 / 765
CJ23G-B32300@500 / 3-4.5t / 1010 / 440-1785 / 1520 / 738 / 28 / 45 / 125 / 200 / 218 / 184 / 490
CJ23G-B42300@500 / 3-4.5t / 1010 / 440-1785 / 1670 / 738 / 28 / 45 / 125 / 180 / 291 / 184 / 490
CJ30G-C13000@600 / 5-7t / 1010 / 438-2038 / 1670 / 949 / 28 / 50 / 125 / 202 / 241 / 212 / 750
ModelPressure value (Bar) / Flow value(Bar)
MaximumLateral movement / Clamping action
LeastRecommend / Maximum / Least
CJ**G-A160 / 4 / 15 / 26
CJ**G-B160 / 4 / 23 / 38 / 15
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

CJ*** Forklift attachment, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Site and warehouse work

The machine is specified against the load, floor and working height.

The machine is specified against the load, floor and working height.

The machine is specified against the load, floor and working height.

The machine is specified against the load, floor and working height.

Check closed mast or chassis height against the lowest door on the route. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records CJ16G-A1: 1600 @600 / 1-2.5t / 1040 / 400-1625 / 1070 / 740 / 28 / 35 / 100 / 155 / 170 / 167 / 326; CJ16G-A2: 1600 @600 / 1-2.5t / 1040 / 400-1625 / 1220 / 740 / 28 / 35 / 100 / 161 / 170 / 167 / 295; CJ23G-B1: 2300 @600 / 3-4.5t / 1010 / 440-1785 / 1070 / 738 / 28 / 45 / 125 / 214 / 163 / 184 / 450; CJ23G-B2: 2300 @500 / 3-4.5t / 1010 / 410-1780 / 1070 / 796 / 24 / 50 / 150 / 323 / 164 / 318 / 765; CJ23G-B3: 2300@500 / 3-4.5t / 1010 / 440-1785 / 1520 / 738 / 28 / 45 / 125 / 200 / 218 / 184 / 490; CJ23G-B4: 2300@500 / 3-4.5t / 1010 / 440-1785 / 1670 / 738 / 28 / 45 / 125 / 180 / 291 / 184 / 490.

The specification sheet records CJ30G-C1: 3000@600 / 5-7t / 1010 / 438-2038 / 1670 / 949 / 28 / 50 / 125 / 202 / 241 / 212 / 750; Model: Pressure value (Bar) / Flow value(Bar); Maximum: Lateral movement / Clamping action; Least: Recommend / Maximum / Least; CJ**G-A: 160 / 4 / 15 / 26; CJ**G-B: 160 / 4 / 23 / 38 / 15.

Each row in the table keeps the label and value from the source record.

Units are copied as published; convert them only when comparing models.

Rated figures apply at the standard load centre unless a row says otherwise.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

Send pallet size, door height and aisle width with the enquiry.

Compare the lowered height against the lowest door on the route.

Compare capacity first, then the lift height the job actually needs.

Check the machine weight against floor loading where the site is raised.

List the models that clear each constraint before asking for a quote.

  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the CJ***, check headroom under beams, pipes and door frames along the route.

Send photographs of the racking and the existing working area when possible.

On the CJ***, keep the charging or refuelling position clear of the main traffic aisle.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the CJ***, list the attachments required, such as clamps, sideshift or rotator.

Operation and routine checks

On the CJ***, the working area is kept clear of loose packaging and obstacles.

Unusual noise or movement is reported before further use.

On the CJ***, attachments are secured before the machine leaves the station.

The operator checks load stability before each lift or move.

How this model fits the operation

On the CJ***, this machine usually works alongside pallet trucks and stacking equipment.

Related models in the same group are listed on the family page.

On the CJ***, the layout drawing shows where each machine sits in the operation.

The receiving side pairs it with a dock ramp or platform where needed.

Working conditions and honest limits

On the CJ***, dimensions are checked against the source record before quoting.

Capacity above the rated lift height follows the mast curve.

On the CJ***, the specification sheet is the binding reference for listed values.

The signed datasheet issued with the quotation is the binding version.

Delivery, documents and support

On the CJ***, packing follows sea-freight practice for the chosen chassis.

Wear parts are supplied after delivery against the parts manual.

On the CJ***, mixed equipment can be listed on one enquiry.

The operation and parts material travel with the machine.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

The operation material covers controls, checks and routine service points.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
ST880X———Manual pallet jack duty

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.