Foldable luggage cart SRT01 Foldable luggage cart SRT01, rated capacity 40. Selection starts from the load per move and the space around it.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SRT01 |
| N.W. | 1.2 |
| Capacity | 40 |
| Base size (cm) [annotated, label not given in image] | 32×23 |
Gallery
All detail images published for this model.







Foldable luggage cart SRT01 Foldable luggage cart SRT01, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Site-specific lifting and moving tasks
Published figures for this build: rated capacity 40 kgs.
The enquiry should describe the station the equipment works at.
The machine is specified against the load, floor and working height.
Each build is quoted line by line once the duty cycle is confirmed.
The machine is specified against the load, floor and working height.
Check closed mast or chassis height against the lowest door on the route. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Model: SRT01; N.W. (kgs): 1.2; Capacity (kgs): 40; Base size (cm) [annotated, label not given in image]: 32×23.
Remaining parameters are listed row by row in the specification table.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Send pallet size, door height and aisle width with the enquiry.
Match the power arrangement to the shifts and the working environment.
Check the chassis width against the aisle and the container door.
Compare the lowered height against the lowest door on the route.
Check the machine weight against floor loading where the site is raised.
On the Foldable luggage cart SRT01, check headroom under beams, pipes and door frames along the route.
Note any slope, threshold or step along the working route.
On the Foldable luggage cart SRT01, keep the charging or refuelling position clear of the main traffic aisle.
Measure the pallet footprint and the heaviest single load before comparing models.
On the Foldable luggage cart SRT01, list the attachments required, such as clamps, sideshift or rotator.
On the Foldable luggage cart SRT01, unusual noise or movement is reported before further use.
Battery or fuel levels are checked at the start of each shift.
On the Foldable luggage cart SRT01, the working area is kept clear of loose packaging and obstacles.
The operator checks load stability before each lift or move.
On the Foldable luggage cart SRT01, the layout drawing shows where each machine sits in the operation.
A mixed enquiry can list this model together with other families.
On the Foldable luggage cart SRT01, attachments such as clamps or rotators are matched to the load shape.
This machine usually works alongside pallet trucks and stacking equipment.
On the Foldable luggage cart SRT01, attachments are quoted separately once the base chassis is fixed.
Tyre choice should match the floor rather than the price list.
On the Foldable luggage cart SRT01, site conditions such as gradient, dust and moisture belong in the enquiry.
The signed datasheet issued with the quotation is the binding version.
On the Foldable luggage cart SRT01, the enquiry should include the quantity and destination port.
Quote the serial number and component name when ordering spares.
On the Foldable luggage cart SRT01, the operation and parts material travel with the machine.
Wear parts are supplied after delivery against the parts manual.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 40 at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.