Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

GZS120S / S-1 / AT — Hand Truck

GZS120S / S-1 / AT Hand Truck. Selection starts from the load per move and the space around it.

GZS120S / S-1 / AT Hand Truck — product photo 1 of 3

Ordering facts for the GZS120S / S-1 / AT

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

GZS120S / S-1 / AT specification

The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.

Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

GZS120S / S-1 / AT Hand Truck, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Hand carrying and moving loads

The machine is specified against the load, floor and working height.

The machine is specified against the load, floor and working height.

The machine is specified against the load, floor and working height.

The machine is specified against the load, floor and working height.

Confirm the aisle width against the pallet depth before choosing a chassis. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The published parameters for this build are listed in the specification table.

Items the source record did not publish are shown as an em dash in the table.

Those missing items can be asked for directly through the enquiry form.

Options and attachments are listed separately from the base chassis.

An em dash marks a value the source record did not publish.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

Dimensions in the table come from the source record.

Send pallet size, door height and aisle width with the enquiry.

Check the machine weight against floor loading where the site is raised.

Note any attachment that changes the load centre or the overall width.

Compare the lowered height against the lowest door on the route.

List the models that clear each constraint before asking for a quote.

  • State the shifts per day so the power arrangement can be sized properly.
  • Mark the stations where loads are picked up and dropped off each shift.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the GZS120S / S-1 / AT, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Mark the stations where loads are picked up and dropped off each shift.

On the GZS120S / S-1 / AT, list the attachments required, such as clamps, sideshift or rotator.

Send photographs of the racking and the existing working area when possible.

On the GZS120S / S-1 / AT, measure the pallet footprint and the heaviest single load before comparing models.

Operation and routine checks

On the GZS120S / S-1 / AT, loads are kept low while travelling between stations.

Battery or fuel levels are checked at the start of each shift.

On the GZS120S / S-1 / AT, the operator follows the rated capacity marked on the chassis.

The working area is kept clear of loose packaging and obstacles.

How this model fits the operation

On the GZS120S / S-1 / AT, this machine usually works alongside pallet trucks and stacking equipment.

The layout drawing shows where each machine sits in the operation.

On the GZS120S / S-1 / AT, spare parts for wear items follow the parts manual after delivery.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the GZS120S / S-1 / AT, any option not listed should be confirmed in writing before order.

Dimensions are checked against the source record before quoting.

On the GZS120S / S-1 / AT, site conditions such as gradient, dust and moisture belong in the enquiry.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the GZS120S / S-1 / AT, the booking reference is issued with the proforma invoice.

Documents issued for an order are listed in the quotation.

On the GZS120S / S-1 / AT, the operation and parts material travel with the machine.

Mixed equipment can be listed on one enquiry.

The operation material covers controls, checks and routine service points.

The parts manual lists the wear items and their reference views.

The serial number identifies the build when parts are ordered later.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
ST880X———Manual pallet jack duty

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.