LEP Electric Pallet Truck. Hand versions keep a simple hydraulic pump for short repeated moves.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| 1 | Model / LEP-20W |
| 2 | Configuration No. / AC+EPS |
| 3 | Load capacity / kg / 2000 |
| 4 | Load center / mm / 600 |
| 5 | Wheel base / mm / 1390 |
| 6 | Operating type / Walkie |
| 7 | Wheels type / PU |
| 8 | Wheel quantity Driving wheel/Balance wheel /Bearing wheel / 1/1/4 |
| 9 | Driving wheel size / mm / ¢248×75 |
| 10 | Balance wheel size / mm / ¢80×80 (Double wheels) |
| 11 | Bearing wheel size / mm / ¢115×55 |
| 12 | Min.fork lowered height / mm / 85 |
| 13 | Max.fork lifting height / mm / 195 |
| 14 | Max.lifting height / mm / 110 |
| 15 | Overall fork width / mm / 540/600/685 |
| 16 | Fork length / mm / 1150/1200 |
| 17 | Fork width / mm / 185 |
| 18 | Fork thickness / mm / 55 |
| 19 | Overall length / mm / 1750 |
| 20 | Overall width / mm / 720 |
| 21 | Overall height(With handle) / mm / 1385 |
| 22 | Overall height(Without handle) / mm / 850 |
| 23 | Min.Turning radius / mm / 1575 |
| 24 | Min.Aisle width for pallets 800×1200 / mm / 1900 |
| 25 | Min.Aisle width for pallets 1000×1200 / mm / 1940 |
| 26 | Travel speed,laden/unladen / km/h / 4/4 |
| 27 | Lift speed,laden/unladen / mm/s / 56/60 |
| 28 | Lowering speed,laden/unladen / mm/s / 57/59 |
| 29 | Gradeability,laden/unladen / 5/7 |
| 30 | Drive motor / KW / AC 1.5 |
| 31 | Lift motor / KW / DC 2.0 |
| 32 | Steering motor / KW / DC 0.15 |
| 33 | Battery voltage / capacity / V/Ah / 24/210 |
| 34 | Brake / Electromagnetic / Regenerative |
| 35 | Controller / CURTIS 1230 |
| 36 | Battery weight / kg / 190 |
| 37 | Service weight with battery / kg / 600 |
Gallery
All detail images published for this model.


LEP Electric Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Dock unloading and loading
Hand versions keep a simple hydraulic pump for short repeated moves.
The chassis stays low, so forks slide under a standard pallet.
Short floor transport between dock and store is the usual duty.
The chassis stays low, so forks slide under a standard pallet.
State any attachment required alongside the base model. Match the tyre type to the floor surface rather than the price list.
The specification sheet records 1: Model / LEP-20W; 2: Configuration No. / AC+EPS; 3: Load capacity / kg / 2000; 4: Load center / mm / 600; 5: Wheel base / mm / 1390; 6: Operating type / Walkie.
The specification sheet records 7: Wheels type / PU; 8: Wheel quantity Driving wheel/Balance wheel /Bearing wheel / 1/1/4; 9: Driving wheel size / mm / ¢248×75; 10: Balance wheel size / mm / ¢80×80 (Double wheels); 11: Bearing wheel size / mm / ¢115×55; 12: Min.fork lowered height / mm / 85.
The specification sheet records 13: Max.fork lifting height / mm / 195; 14: Max.lifting height / mm / 110; 15: Overall fork width / mm / 540/600/685; 16: Fork length / mm / 1150/1200; 17: Fork width / mm / 185; 18: Fork thickness / mm / 55.
The specification sheet records 19: Overall length / mm / 1750; 20: Overall width / mm / 720; 21: Overall height(With handle) / mm / 1385; 22: Overall height(Without handle) / mm / 850; 23: Min.Turning radius / mm / 1575; 24: Min.Aisle width for pallets 800×1200 / mm / 1900.
The specification sheet records 25: Min.Aisle width for pallets 1000×1200 / mm / 1940; 26: Travel speed,laden/unladen / km/h / 4/4; 27: Lift speed,laden/unladen / mm/s / 56/60; 28: Lowering speed,laden/unladen / mm/s / 57/59; 29: Gradeability,laden/unladen / 5/7; 30: Drive motor / KW / AC 1.5.
The specification sheet records 31: Lift motor / KW / DC 2.0; 32: Steering motor / KW / DC 0.15; 33: Battery voltage / capacity / V/Ah / 24/210; 34: Brake / Electromagnetic / Regenerative; 35: Controller / CURTIS 1230; 36: Battery weight / kg / 190.
The specification sheet records 37: Service weight with battery / kg / 600.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
The listed figures follow the record; options are confirmed on the quotation.
Note any attachment that changes the load centre or the overall width.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
Check the machine weight against floor loading where the site is raised.
On the LEP, mark the stations where loads are picked up and dropped off each shift.
Send photographs of the racking and the existing working area when possible.
On the LEP, check headroom under beams, pipes and door frames along the route.
Keep the charging or refuelling position clear of the main traffic aisle.
On the LEP, measure the pallet footprint and the heaviest single load before comparing models.
On the LEP, the operator checks load stability before each lift or move.
The operator follows the rated capacity marked on the chassis.
On the LEP, loads are kept low while travelling between stations.
Attachments are secured before the machine leaves the station.
On the LEP, attachments such as clamps or rotators are matched to the load shape.
This machine usually works alongside pallet trucks and stacking equipment.
On the LEP, spare parts for wear items follow the parts manual after delivery.
The layout drawing shows where each machine sits in the operation.
On the LEP, attachments are quoted separately once the base chassis is fixed.
Tyre choice should match the floor rather than the price list.
On the LEP, any option not listed should be confirmed in writing before order.
The specification sheet is the binding reference for listed values.
On the LEP, the enquiry should include the quantity and destination port.
Quotations follow the model, listed specification and destination port.
On the LEP, documents issued for an order are listed in the quotation.
Wear parts are supplied after delivery against the parts manual.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.