LEP-20B Electric Pallet Truck. Hand and powered pallet trucks are the first dock unloading tool.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| 1 | Model / LEP-20B |
| 2 | Configuration No. / AC |
| 3 | Load capacity / kg / 2000 |
| 4 | Load center / mm / 600 |
| 5 | Wheel base / mm / 1300 |
| 6 | Operating type / Walkie |
| 7 | Wheels type / PU |
| 8 | Wheel quantity Driving wheel/Balance wheel /Bearing wheel / 1/1/4 |
| 9 | Driving wheel size / mm / ¢228×75 |
| 10 | Balance wheel size / mm / ¢84×80 (Double wheels) |
| 11 | Bearing wheel size / mm / ¢115×55 |
| 12 | Min.fork lowered height / mm / 85 |
| 13 | Max.fork lifting height / mm / 200 |
| 14 | Max.lifting height / mm / 115 |
| 15 | Overall fork width / mm / 550/600/685 |
| 16 | Fork length / mm / 1150/1200 |
| 17 | Fork width / mm / 165 |
| 18 | Fork thickness / mm / 55 |
| 19 | Overall length / mm / 1650 |
| 20 | Overall width / mm / 725 |
| 21 | Overall height(With handle) / mm / 1380 |
| 22 | Overall height(Without handle) / mm / 890 |
| 23 | Min.Turning radius / mm / 1450 |
| 24 | Min.Aisle width for pallets 800×1200 / mm / 1866 |
| 25 | Min.Aisle width for pallets 1000×1200 / mm / 1921 |
| 26 | Travel speed,laden/unladen / km/h / 3.5/4.0 |
| 27 | Lift speed,laden/unladen / mm/s / 20/25 |
| 28 | Lowering speed,laden/unladen / mm/s / 40/30 |
| 29 | Gradeability,laden/unladen / 5/7 |
| 30 | Drive motor / KW / AC 0.93 |
| 31 | Lift motor / KW / DC1.2 |
| 32 | Steering motor / KW |
| 33 | Battery voltage / capacity / V/Ah / 24/140Ah, 24/210 |
| 34 | Brake / Electromagnetic / Regenerative |
| 35 | Controller / ZAPI AC0 |
| 36 | Battery weight / kg / 190 |
| 37 | Service weight with battery / kg / 585 |
Gallery
All detail images published for this model.


LEP-20B Electric Pallet Truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Horizontal pallet transport
Pallet trucks move palletised loads across a floor or into a container.
The chassis stays low, so forks slide under a standard pallet.
Short floor transport between dock and store is the usual duty.
Powered versions reduce walking distance on long warehouse runs.
Confirm the charger voltage or fuel type for your destination country. Compare rated capacity against the heaviest single load you move.
The specification sheet records 1: Model / LEP-20B; 2: Configuration No. / AC; 3: Load capacity / kg / 2000; 4: Load center / mm / 600; 5: Wheel base / mm / 1300; 6: Operating type / Walkie.
The specification sheet records 7: Wheels type / PU; 8: Wheel quantity Driving wheel/Balance wheel /Bearing wheel / 1/1/4; 9: Driving wheel size / mm / ¢228×75; 10: Balance wheel size / mm / ¢84×80 (Double wheels); 11: Bearing wheel size / mm / ¢115×55; 12: Min.fork lowered height / mm / 85.
The specification sheet records 13: Max.fork lifting height / mm / 200; 14: Max.lifting height / mm / 115; 15: Overall fork width / mm / 550/600/685; 16: Fork length / mm / 1150/1200; 17: Fork width / mm / 165; 18: Fork thickness / mm / 55.
The specification sheet records 19: Overall length / mm / 1650; 20: Overall width / mm / 725; 21: Overall height(With handle) / mm / 1380; 22: Overall height(Without handle) / mm / 890; 23: Min.Turning radius / mm / 1450; 24: Min.Aisle width for pallets 800×1200 / mm / 1866.
The specification sheet records 25: Min.Aisle width for pallets 1000×1200 / mm / 1921; 26: Travel speed,laden/unladen / km/h / 3.5/4.0; 27: Lift speed,laden/unladen / mm/s / 20/25; 28: Lowering speed,laden/unladen / mm/s / 40/30; 29: Gradeability,laden/unladen / 5/7; 30: Drive motor / KW / AC 0.93.
The specification sheet records 31: Lift motor / KW / DC1.2; 32 (kw): Steering motor / KW; 33: Battery voltage / capacity / V/Ah / 24/140Ah, 24/210; 34: Brake / Electromagnetic / Regenerative; 35: Controller / ZAPI AC0; 36: Battery weight / kg / 190.
The specification sheet records 37: Service weight with battery / kg / 585.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Dimensions in the table come from the source record.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
List the models that clear each constraint before asking for a quote.
Check the machine weight against floor loading where the site is raised.
On the LEP-20B, measure the pallet footprint and the heaviest single load before comparing models.
Send photographs of the racking and the existing working area when possible.
On the LEP-20B, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check the lowest door, beam height and aisle the truck has to pass through.
On the LEP-20B, list the attachments required, such as clamps, sideshift or rotator.
On the LEP-20B, battery or fuel levels are checked at the start of each shift.
Attachments are secured before the machine leaves the station.
On the LEP-20B, the operator follows the rated capacity marked on the chassis.
Loads are kept low while travelling between stations.
On the LEP-20B, the layout drawing shows where each machine sits in the operation.
The receiving side pairs it with a dock ramp or platform where needed.
On the LEP-20B, a mixed enquiry can list this model together with other families.
Related models in the same group are listed on the family page.
On the LEP-20B, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the LEP-20B, capacity above the rated lift height follows the mast curve.
Dimensions are checked against the source record before quoting.
On the LEP-20B, the enquiry should include the quantity and destination port.
The operation and parts material travel with the machine.
On the LEP-20B, loading is recorded before the container is sealed.
Quote the serial number and component name when ordering spares.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.