ETF100SD Electric lift table, rated capacity 1000Kg. Lift tables raise a pallet or work piece to a comfortable height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | ETF100SD |
| Load Capacity | 1000 kg |
| Lowest Height | 500 mm |
| Max. Height | 1700 mm |
| Table Dimensions | 1200×610 mm |
| Outine Dimensions | 1630×610×1000 mm |
| Net Weight | 334 kg |
ETF100SD Electric lift table, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Ergonomic load positioning
Published figures for this build: rated capacity 1000 kg.
They reduce bending and manual lifting at packing stations and docks.
Lift tables raise a pallet or work piece to a comfortable height.
Lowered height decides how a pallet can be driven onto the deck.
Lift tables raise a pallet or work piece to a comfortable height.
State any attachment required alongside the base model. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: ETF100SD; Load Capacity (kg): 1000 kg; Lowest Height (mm): 500 mm; Max. Height (mm): 1700 mm; Table Dimensions (mm): 1200×610 mm; Outine Dimensions (mm): 1630×610×1000 mm.
The specification sheet records Net Weight (kg): 334 kg.
Rated figures apply at the standard load centre unless a row says otherwise.
Those missing values can be requested directly through the enquiry form.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
The listed figures follow the record; options are confirmed on the quotation.
Check the machine weight against floor loading where the site is raised.
Check the chassis width against the aisle and the container door.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
On the ETF100SD, send photographs of the racking and the existing working area when possible.
Check headroom under beams, pipes and door frames along the route.
On the ETF100SD, keep the charging or refuelling position clear of the main traffic aisle.
Mark the stations where loads are picked up and dropped off each shift.
On the ETF100SD, state the shifts per day so the power arrangement can be sized properly.
On the ETF100SD, the operator follows the rated capacity marked on the chassis.
Routine checks cover tyres, brakes, controls and visible leaks.
On the ETF100SD, unusual noise or movement is reported before further use.
Battery or fuel levels are checked at the start of each shift.
On the ETF100SD, this machine usually works alongside pallet trucks and stacking equipment.
Related models in the same group are listed on the family page.
On the ETF100SD, the receiving side pairs it with a dock ramp or platform where needed.
Storage cages and racking organise the loads it moves between stations.
On the ETF100SD, the signed datasheet issued with the quotation is the binding version.
Tyre choice should match the floor rather than the price list.
On the ETF100SD, any option not listed should be confirmed in writing before order.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the ETF100SD, wear parts are supplied after delivery against the parts manual.
Quote the serial number and component name when ordering spares.
On the ETF100SD, the operation and parts material travel with the machine.
Quotations follow the model, listed specification and destination port.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 1000Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 334 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.