ETW1000 ETW1001 Electric lift table, rated capacity 1000Kg. Lowered height decides how a pallet can be driven onto the deck.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Unit | ETW1000 | ETW1001 |
|---|---|---|---|
| Model | — | ETW1000 | ETW1001 |
| Load Capacity | kg | 1000 kg | |
| Lowest Height | mm | 305 | 400 |
| Max. Height | mm | 1780 | 2400 |
| Table Dimensions | mm | 1300×820 | 2200×1300 |
| Net Weight | kg | 210 | 305 |
ETW1000 ETW1001 Electric lift table, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Machine feeding at working height
Published figures for this build: rated capacity 1000 kg.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Table size matches the pallet footprint and the load per cycle.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Lift tables raise a pallet or work piece to a comfortable height.
Note cold store, outdoor gradient or container entry as a constraint. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Model: ETW1000 / ETW1001; Load Capacity (kg): 1000 kg; Lowest Height (mm): 305 / 400; Max. Height (mm): 1780 / 2400; Table Dimensions (mm): 1300×820 / 2200×1300; Net Weight (kg): 210 / 305.
Remaining parameters are listed row by row in the specification table.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Door and beam heights decide which mast will clear the route.
Match the power arrangement to the shifts and the working environment.
Check the machine weight against floor loading where the site is raised.
Note any attachment that changes the load centre or the overall width.
Review the tyre type against the surface the machine will run on.
On the ETW1000 ETW1001, check the lowest door, beam height and aisle the truck has to pass through.
State the shifts per day so the power arrangement can be sized properly.
On the ETW1000 ETW1001, keep the charging or refuelling position clear of the main traffic aisle.
Measure the pallet footprint and the heaviest single load before comparing models.
On the ETW1000 ETW1001, list the attachments required, such as clamps, sideshift or rotator.
On the ETW1000 ETW1001, the working area is kept clear of loose packaging and obstacles.
The operator follows the rated capacity marked on the chassis.
On the ETW1000 ETW1001, unusual noise or movement is reported before further use.
Attachments are secured before the machine leaves the station.
On the ETW1000 ETW1001, this machine usually works alongside pallet trucks and stacking equipment.
Spare parts for wear items follow the parts manual after delivery.
On the ETW1000 ETW1001, a mixed enquiry can list this model together with other families.
Storage cages and racking organise the loads it moves between stations.
On the ETW1000 ETW1001, the specification sheet is the binding reference for listed values.
Any option not listed should be confirmed in writing before order.
On the ETW1000 ETW1001, site conditions such as gradient, dust and moisture belong in the enquiry.
The signed datasheet issued with the quotation is the binding version.
On the ETW1000 ETW1001, the operation and parts material travel with the machine.
Quote the serial number and component name when ordering spares.
On the ETW1000 ETW1001, the enquiry should include the quantity and destination port.
Documents issued for an order are listed in the quotation.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 1000Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.