ET1001 ET1002 Electric lift table, rated capacity 1000Kg. Lift tables raise a pallet or work piece to a comfortable height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Unit | ET1001 | ET1002 |
|---|---|---|---|
| Model | — | ET1001 | ET1002 |
| Load Capacity | kg | 1000 kg | |
| Lowest Height | mm | 205 mm | |
| Max. Height | mm | 1000 mm | |
| Table Dimensions | mm | 1300×820 | 1300×1000 |
| Net Weight | kg | 160 | 186 |
ET1001 ET1002 Electric lift table, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Production cell feeding
Published figures for this build: rated capacity 1000 kg.
Lift tables raise a pallet or work piece to a comfortable height.
Lowered height decides how a pallet can be driven onto the deck.
They reduce bending and manual lifting at packing stations and docks.
Fixed and mobile tables fit production cells, picking and stuffing.
Check closed mast or chassis height against the lowest door on the route. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Model: ET1001 / ET1002; Load Capacity (kg): 1000 kg; Lowest Height (mm): 205 mm; Max. Height (mm): 1000 mm; Table Dimensions (mm): 1300×820 / 1300×1000; Net Weight (kg): 160 / 186.
Remaining parameters are listed row by row in the specification table.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
Send pallet size, door height and aisle width with the enquiry.
Note any attachment that changes the load centre or the overall width.
List the models that clear each constraint before asking for a quote.
Compare the lowered height against the lowest door on the route.
Match the power arrangement to the shifts and the working environment.
On the ET1001 ET1002, measure the pallet footprint and the heaviest single load before comparing models.
Check the lowest door, beam height and aisle the truck has to pass through.
On the ET1001 ET1002, note any slope, threshold or step along the working route.
State the shifts per day so the power arrangement can be sized properly.
On the ET1001 ET1002, check headroom under beams, pipes and door frames along the route.
On the ET1001 ET1002, the operator checks load stability before each lift or move.
Loads are kept low while travelling between stations.
On the ET1001 ET1002, the working area is kept clear of loose packaging and obstacles.
The operator follows the rated capacity marked on the chassis.
On the ET1001 ET1002, related models in the same group are listed on the family page.
A mixed enquiry can list this model together with other families.
On the ET1001 ET1002, storage cages and racking organise the loads it moves between stations.
Spare parts for wear items follow the parts manual after delivery.
On the ET1001 ET1002, attachments are quoted separately once the base chassis is fixed.
Dimensions are checked against the source record before quoting.
On the ET1001 ET1002, any option not listed should be confirmed in writing before order.
Tyre choice should match the floor rather than the price list.
On the ET1001 ET1002, the operation and parts material travel with the machine.
Packing follows sea-freight practice for the chosen chassis.
On the ET1001 ET1002, wear parts are supplied after delivery against the parts manual.
Quote the serial number and component name when ordering spares.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
Questions
The listed rated capacity is 1000Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.