Electric floor crane SDC1030-A Electric floor crane SDC1030-A. Selection starts from the load per move and the space around it.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SDC-A-0530; SIC-A-1025; SDC-A-1030 |
| Order Number | SDC-A-0530: 8.00001; SIC-A-1025: 8.00002; SDC-A-1030: 8.00003 |
| Capacity | SDC-A-0530: 500; SIC-A-1025: 1000; SDC-A-1030: 1000 |
| Lifting Height | SDC-A-0530: 3000; SIC-A-1025: 2500; SDC-A-1030: 3000 |
| Battery | SDC-A-0530: 24/165; SIC-A-1025: 24/165; SDC-A-1030: 24/210 |
| Charger | SDC-A-0530: 24/20; SIC-A-1025: 24/20; SDC-A-1030: 24/30 |
| Lifting Motor | SDC-A-0530: 2.5; SIC-A-1025: 2.5; SDC-A-1030: 2.5 |
| Driving Motor | SDC-A-0530: AC1.2; SIC-A-1025: HC1.2; SDC-A-1030: HC1.2 |
| Rotation | SDC-A-0530: ±90°; SIC-A-1025: 90°; SDC-A-1030: ±90° |
| Outriggers Length | SDC-A-0530: 950; SIC-A-1025: 950; SDC-A-1030: 950 |
| Outrigger Inner Width | SDC-A-0530: 680; SIC-A-1025: 680; SDC-A-1030: 680 |
| Straddles Overall Width | SDC-A-0530: 990; SIC-A-1025: 990; SDC-A-1030: 990 |
| Outriggers Ground clearance | SDC-A-0530: 200; SIC-A-1025: 200; SDC-A-1030: 200 |
| Min. Arm Extending Distance from Outriggers | SDC-A-0530: 420; SIC-A-1025: 400; SDC-A-1030: 350 |
| Weight | SDC-A-0530: 710; SIC-A-1025: 730; SDC-A-1030: 760 |
| Overall size (mm) L*W*H | SDC-A-0530: 2670*990*1800; SIC-A-1025: 2900*990*1600; SDC-A-1030: 2900*990*1800 |
| Turning Aisle | SDC-A-0530: 2800; SIC-A-1025: 3100; SDC-A-1030: 3100 |
Gallery
All detail images published for this model.





Electric floor crane SDC1030-A Electric floor crane SDC1030-A, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Site and warehouse work
Published figures for this build: rated capacity SDC-A-0530: 500; SIC-A-1025: 1000; SDC-A-1030: 1000, overall width SDC-A-0530: 990; SIC-A-1025: 990; SDC-A-1030: 990, turning radius SDC-A-0530: 2800; SIC-A-1025: 3100; SDC-A-1030: 3100.
This item belongs to the broader SUNRISE material handling catalogue.
Dimensions on the datasheet are checked against the site layout.
The machine is specified against the load, floor and working height.
The enquiry should describe the station the equipment works at.
Describe the shifts per day when the power arrangement is selected. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: SDC-A-0530; SIC-A-1025; SDC-A-1030; Order Number: SDC-A-0530: 8.00001; SIC-A-1025: 8.00002; SDC-A-1030: 8.00003; Capacity (kg): SDC-A-0530: 500; SIC-A-1025: 1000; SDC-A-1030: 1000; Lifting Height (mm): SDC-A-0530: 3000; SIC-A-1025: 2500; SDC-A-1030: 3000; Battery (V/Ah): SDC-A-0530: 24/165; SIC-A-1025: 24/165; SDC-A-1030: 24/210; Charger (V/A): SDC-A-0530: 24/20; SIC-A-1025: 24/20; SDC-A-1030: 24/30.
The specification sheet records Lifting Motor (Kw): SDC-A-0530: 2.5; SIC-A-1025: 2.5; SDC-A-1030: 2.5; Driving Motor (Kw): SDC-A-0530: AC1.2; SIC-A-1025: HC1.2; SDC-A-1030: HC1.2; Rotation (°): SDC-A-0530: ±90°; SIC-A-1025: 90°; SDC-A-1030: ±90°; Outriggers Length (mm): SDC-A-0530: 950; SIC-A-1025: 950; SDC-A-1030: 950; Outrigger Inner Width (mm): SDC-A-0530: 680; SIC-A-1025: 680; SDC-A-1030: 680; Straddles Overall Width (mm): SDC-A-0530: 990; SIC-A-1025: 990; SDC-A-1030: 990.
The specification sheet records Outriggers Ground clearance (mm): SDC-A-0530: 200; SIC-A-1025: 200; SDC-A-1030: 200; Min. Arm Extending Distance from Outriggers (mm): SDC-A-0530: 420; SIC-A-1025: 400; SDC-A-1030: 350; Weight (Kg): SDC-A-0530: 710; SIC-A-1025: 730; SDC-A-1030: 760; Overall size (mm) L*W*H: SDC-A-0530: 2670*990*1800; SIC-A-1025: 2900*990*1600; SDC-A-1030: 2900*990*1800; Turning Aisle (mm): SDC-A-0530: 2800; SIC-A-1025: 3100; SDC-A-1030: 3100.
Those missing values can be requested directly through the enquiry form.
An em dash marks a value the source record did not publish.
Units are copied as published; convert them only when comparing models.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Measure the pallet footprint before the chassis is shortlisted.
Check the chassis width against the aisle and the container door.
Compare capacity first, then the lift height the job actually needs.
Compare the lowered height against the lowest door on the route.
Note any attachment that changes the load centre or the overall width.
On the Electric floor crane SDC1030-A, check headroom under beams, pipes and door frames along the route.
List the attachments required, such as clamps, sideshift or rotator.
On the Electric floor crane SDC1030-A, measure the pallet footprint and the heaviest single load before comparing models.
Mark the stations where loads are picked up and dropped off each shift.
On the Electric floor crane SDC1030-A, check the lowest door, beam height and aisle the truck has to pass through.
On the Electric floor crane SDC1030-A, the operator follows the rated capacity marked on the chassis.
The working area is kept clear of loose packaging and obstacles.
On the Electric floor crane SDC1030-A, attachments are secured before the machine leaves the station.
Loads are kept low while travelling between stations.
On the Electric floor crane SDC1030-A, related models in the same group are listed on the family page.
The receiving side pairs it with a dock ramp or platform where needed.
On the Electric floor crane SDC1030-A, attachments such as clamps or rotators are matched to the load shape.
Storage cages and racking organise the loads it moves between stations.
On the Electric floor crane SDC1030-A, dimensions are checked against the source record before quoting.
Tyre choice should match the floor rather than the price list.
On the Electric floor crane SDC1030-A, site conditions such as gradient, dust and moisture belong in the enquiry.
Any option not listed should be confirmed in writing before order.
On the Electric floor crane SDC1030-A, loading is recorded before the container is sealed.
The enquiry should include the quantity and destination port.
On the Electric floor crane SDC1030-A, mixed equipment can be listed on one enquiry.
Documents issued for an order are listed in the quotation.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.