Electric floor crane Electric floor crane. Dimensions on the datasheet are checked against the site layout.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SDC-A-0530; SDC-A-1025; SDC-A-1030 |
| Order Number | SDC-A-0530: 8.00001; SDC-A-1025: 8.00002; SDC-A-1030: 8.00003 |
| Capacity | SDC-A-0530: 500; SDC-A-1025: 1000; SDC-A-1030: 1000 |
| Lifting Height | SDC-A-0530: 3000; SDC-A-1025: 2500; SDC-A-1030: 3000 |
| Battery | SDC-A-0530: 24/165; SDC-A-1025: 24/165; SDC-A-1030: 24/210 |
| Charger | SDC-A-0530: 24/20; SDC-A-1025: 24/20; SDC-A-1030: 24/30 |
| Lifting Motor | SDC-A-0530: 2.5; SDC-A-1025: 2.5; SDC-A-1030: 2.5 |
| Driving Motor | SDC-A-0530: AC1.2; SDC-A-1025: AC1.2; SDC-A-1030: AC1.2 |
| Rotation | SDC-A-0530: ±90°; SDC-A-1025: ±90°; SDC-A-1030: ±90° |
| Outriggers Length | SDC-A-0530: 950; SDC-A-1025: 950; SDC-A-1030: 950 |
| Outriggers Inner Width | SDC-A-0530: 680; SDC-A-1025: 680; SDC-A-1030: 680 |
| Straddles Overall Width | SDC-A-0530: 990; SDC-A-1025: 990; SDC-A-1030: 990 |
| Outriggers Ground Clearance | SDC-A-0530: 200; SDC-A-1025: 200; SDC-A-1030: 200 |
| Min. Arm Extending Distance from Outriggers | SDC-A-0530: 420; SDC-A-1025: 400; SDC-A-1030: 350 |
| Weight | SDC-A-0530: 710; SDC-A-1025: 730; SDC-A-1030: 760 |
| Overall size (mm) L*W*H | SDC-A-0530: 2670*990*1800; SDC-A-1025: 2900*990*1600; SDC-A-1030: 2900*990*1800 |
| Turning Aisle | SDC-A-0530: 2800; SDC-A-1025: 3100; SDC-A-1030: 3100 |
| Passing Aisle | SDC-A-0530: 1100; SDC-A-1025: 1100; SDC-A-1030: 1100 |
| Driving wheel | SDC-A-0530: 1*Ø250*80; SDC-A-1025: 1*Ø250*80; SDC-A-1030: 1*Ø250*80 |
| Auxiliary Wheels | SDC-A-0530: 2*Ø150*50; SDC-A-1025: 2*Ø150*50; SDC-A-1030: 2*Ø150*50 |
| Front Wheels | SDC-A-0530: 2*Ø150*75; SDC-A-1025: 2*Ø150*75; SDC-A-1030: 2*Ø150*75 |
| Climbing slope | SDC-A-0530: 4/6; SDC-A-1025: 4/6; SDC-A-1030: 4/6 |
| Travel Speed (Loaded/Unloaded) | SDC-A-0530: 4/6 Loaded/Unloaded; SDC-A-1025: 4/6 Loaded/Unloaded; SDC-A-1030: 4/6 Loaded/Unloaded |
| Lifting Speed (Loaded/Unloaded) | SDC-A-0530: 45/50 Loaded/Unloaded; SDC-A-1025: 45/50 Loaded/Unloaded; SDC-A-1030: 45/50 Loaded/Unloaded |
| Falling Speed (Loaded/Unloaded) | SDC-A-0530: 45/40 Loaded/Unloaded; SDC-A-1025: 45/40 Loaded/Unloaded; SDC-A-1030: 45/40 Loaded/Unloaded |
| Service Brake | Electromagnetic braking |
Gallery
All detail images published for this model.





Electric floor crane Electric floor crane, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Auxiliary handling around the production line
Published figures for this build: rated capacity SDC-A-0530: 500; SDC-A-1025: 1000; SDC-A-1030: 1000, overall width SDC-A-0530: 990; SDC-A-1025: 990; SDC-A-1030: 990, turning radius SDC-A-0530: 2800; SDC-A-1025: 3100; SDC-A-1030: 3100.
The enquiry should describe the station the equipment works at.
This item belongs to the broader SUNRISE material handling catalogue.
The enquiry should describe the station the equipment works at.
The machine is specified against the load, floor and working height.
Compare rated capacity against the heaviest single load you move. State any attachment required alongside the base model.
The specification sheet records Model: SDC-A-0530; SDC-A-1025; SDC-A-1030; Order Number: SDC-A-0530: 8.00001; SDC-A-1025: 8.00002; SDC-A-1030: 8.00003; Capacity (kg): SDC-A-0530: 500; SDC-A-1025: 1000; SDC-A-1030: 1000; Lifting Height (mm): SDC-A-0530: 3000; SDC-A-1025: 2500; SDC-A-1030: 3000; Battery (V/Ah): SDC-A-0530: 24/165; SDC-A-1025: 24/165; SDC-A-1030: 24/210; Charger (V/A): SDC-A-0530: 24/20; SDC-A-1025: 24/20; SDC-A-1030: 24/30.
The specification sheet records Lifting Motor (Kw): SDC-A-0530: 2.5; SDC-A-1025: 2.5; SDC-A-1030: 2.5; Driving Motor (Kw): SDC-A-0530: AC1.2; SDC-A-1025: AC1.2; SDC-A-1030: AC1.2; Rotation (°): SDC-A-0530: ±90°; SDC-A-1025: ±90°; SDC-A-1030: ±90°; Outriggers Length (mm): SDC-A-0530: 950; SDC-A-1025: 950; SDC-A-1030: 950; Outriggers Inner Width (mm): SDC-A-0530: 680; SDC-A-1025: 680; SDC-A-1030: 680; Straddles Overall Width (mm): SDC-A-0530: 990; SDC-A-1025: 990; SDC-A-1030: 990.
The specification sheet records Outriggers Ground Clearance (mm): SDC-A-0530: 200; SDC-A-1025: 200; SDC-A-1030: 200; Min. Arm Extending Distance from Outriggers (mm): SDC-A-0530: 420; SDC-A-1025: 400; SDC-A-1030: 350; Weight (Kg): SDC-A-0530: 710; SDC-A-1025: 730; SDC-A-1030: 760; Overall size (mm) L*W*H: SDC-A-0530: 2670*990*1800; SDC-A-1025: 2900*990*1600; SDC-A-1030: 2900*990*1800; Turning Aisle (mm): SDC-A-0530: 2800; SDC-A-1025: 3100; SDC-A-1030: 3100; Passing Aisle (mm): SDC-A-0530: 1100; SDC-A-1025: 1100; SDC-A-1030: 1100.
The specification sheet records Driving wheel (mm): SDC-A-0530: 1*Ø250*80; SDC-A-1025: 1*Ø250*80; SDC-A-1030: 1*Ø250*80; Auxiliary Wheels (mm): SDC-A-0530: 2*Ø150*50; SDC-A-1025: 2*Ø150*50; SDC-A-1030: 2*Ø150*50; Front Wheels (mm): SDC-A-0530: 2*Ø150*75; SDC-A-1025: 2*Ø150*75; SDC-A-1030: 2*Ø150*75; Climbing slope (%): SDC-A-0530: 4/6; SDC-A-1025: 4/6; SDC-A-1030: 4/6; Travel Speed (Loaded/Unloaded) (km/h): SDC-A-0530: 4/6 Loaded/Unloaded; SDC-A-1025: 4/6 Loaded/Unloaded; SDC-A-1030: 4/6 Loaded/Unloaded; Lifting Speed (Loaded/Unloaded) (mm/s): SDC-A-0530: 45/50 Loaded/Unloaded; SDC-A-1025: 45/50 Loaded/Unloaded; SDC-A-1030: 45/50 Loaded/Unloaded.
The specification sheet records Falling Speed (Loaded/Unloaded) (mm/s): SDC-A-0530: 45/40 Loaded/Unloaded; SDC-A-1025: 45/40 Loaded/Unloaded; SDC-A-1030: 45/40 Loaded/Unloaded; Service Brake: Electromagnetic braking.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
The enquiry should list any attachment the job requires.
List the models that clear each constraint before asking for a quote.
Review the tyre type against the surface the machine will run on.
Check the machine weight against floor loading where the site is raised.
Note any attachment that changes the load centre or the overall width.
On the Electric floor crane, measure the pallet footprint and the heaviest single load before comparing models.
Keep the charging or refuelling position clear of the main traffic aisle.
On the Electric floor crane, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check headroom under beams, pipes and door frames along the route.
On the Electric floor crane, check the lowest door, beam height and aisle the truck has to pass through.
On the Electric floor crane, the working area is kept clear of loose packaging and obstacles.
The operator follows the rated capacity marked on the chassis.
On the Electric floor crane, battery or fuel levels are checked at the start of each shift.
Loads are kept low while travelling between stations.
On the Electric floor crane, the layout drawing shows where each machine sits in the operation.
Storage cages and racking organise the loads it moves between stations.
On the Electric floor crane, attachments such as clamps or rotators are matched to the load shape.
Related models in the same group are listed on the family page.
On the Electric floor crane, dimensions are checked against the source record before quoting.
Capacity above the rated lift height follows the mast curve.
On the Electric floor crane, the signed datasheet issued with the quotation is the binding version.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the Electric floor crane, quote the serial number and component name when ordering spares.
Documents issued for an order are listed in the quotation.
On the Electric floor crane, mixed equipment can be listed on one enquiry.
Wear parts are supplied after delivery against the parts manual.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.