Economic electric pallet truck Economic electric pallet truck, lift height 195. Hand versions keep a simple hydraulic pump for short repeated moves.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| 1 Manufacturer | Sunrise |
| 2 Model | LEP-15ME; LEP-20ME |
| 3 Operator type | Walkie |
| 4 Load Capacity Q | LEP-15ME: 1500; LEP-20ME: 2000 |
| 5 Load Center C | LEP-15ME: 600; LEP-20ME: 600 |
| 6 Wheelbase Y | LEP-15ME: 1202/1272; LEP-20ME: 1202/1272 |
| 7 Service Weight | LEP-15ME: 120/125; LEP-20ME: 125/130 |
| 8 Overall Height H1 | 1280 |
| 9 Lift Height H2 | 195 |
| 10 Fork Height (Lowered) H3 | 85 |
| 11 Overall Length L1 | 1555/1625 |
| 12 Overall Width B | 540/680 |
| 13 Fork Size L2 | 540x150/680x1220 |
| 14 Travel Motor | 750w |
| 15 Travel Speed (laden/unladen) | 4/4.5 |
| 16 Max. Gradeability (laden/unladen) | LEP-15ME: 8%/20%; LEP-20ME: 5%/20% |
| 17 Battery Voltage/Capacity | 24V/20Ah Li-Battery |
| 18 Turning Radius R | 1352/1422 |
| 19 Lift Motor | 500w |
| 2 Model | LEP-15MH; LEP-20MH |
| 3 Operator type | Walkie |
| 4 Load Capacity Q | LEP-15MH: 1500; LEP-20MH: 2000 |
| 5 Load Center C | LEP-15MH: 600; LEP-20MH: 600 |
| 6 Wheelbase Y | LEP-15MH: 1202/1272; LEP-20MH: 1202/1272 |
| 7 Service Weight | LEP-15MH: 115/120; LEP-20MH: 120/125 |
| 8 Overall Height H1 | 1280 |
| 9 Lift Height H2 | 200 |
| 10 Fork Height (Lowered) H3 | 85 |
| 11 Overall Length L1 | 1555/1625 |
| 12 Overall Width B | 540/680 |
| 13 Fork Size L2 | 540x150/680x1220 |
| 14 Travel Speed (laden/unladen) | 4/4.5 |
| 15 Max. Gradeability (laden/unladen) | LEP-15MH: 8%/20%; LEP-20MH: 5%/20% |
| 16 Battery Voltage/Capacity | 24V/20Ah Li-Battery |
| 17 Turning Radius R | 1352/1422 |
| 18 Travel Motor | 750w |
Gallery
All detail images published for this model.







Economic electric pallet truck Economic electric pallet truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Warehouse replenishment
Published figures for this build: rated capacity LEP-15ME: 1500; LEP-20ME: 2000, lift height 195 mm, overall width 540/680, turning radius 1352/1422.
Hand and powered pallet trucks are the first dock unloading tool.
Short floor transport between dock and store is the usual duty.
Short floor transport between dock and store is the usual duty.
The chassis stays low, so forks slide under a standard pallet.
Check closed mast or chassis height against the lowest door on the route. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Specification is not published in the source record; Manufacturer: Sunrise; Model: LEP-15ME; LEP-20ME; Operator type: Walkie; Load Capacity Q (kg): LEP-15ME: 1500; LEP-20ME: 2000; Load Center C (mm): LEP-15ME: 600; LEP-20ME: 600.
The specification sheet records Wheelbase Y (mm): LEP-15ME: 1202/1272; LEP-20ME: 1202/1272; Service Weight (kg): LEP-15ME: 120/125; LEP-20ME: 125/130; Overall Height H1 (mm): 1280; Lift Height H2 (mm): 195; Fork Height (Lowered) H3 (mm): 85; Overall Length L1 (mm): 1555/1625.
The specification sheet records Overall Width B (mm): 540/680; Fork Size L2 (mm): 540x150/680x1220; Travel Motor: 750w; Travel Speed (laden/unladen) (km/h): 4/4.5; Max. Gradeability (laden/unladen) (%): LEP-15ME: 8%/20%; LEP-20ME: 5%/20%; Battery Voltage/Capacity (V/Ah): 24V/20Ah Li-Battery.
The specification sheet records Turning Radius R (mm): 1352/1422; Lift Motor: 500w; Specification is not published in the source record; Model: LEP-15MH; LEP-20MH; Operator type: Walkie; Load Capacity Q (kg): LEP-15MH: 1500; LEP-20MH: 2000.
The specification sheet records Load Center C (mm): LEP-15MH: 600; LEP-20MH: 600; Wheelbase Y (mm): LEP-15MH: 1202/1272; LEP-20MH: 1202/1272; Service Weight (kg): LEP-15MH: 115/120; LEP-20MH: 120/125; Overall Height H1 (mm): 1280; Lift Height H2 (mm): 200; Fork Height (Lowered) H3 (mm): 85.
The specification sheet records Overall Length L1 (mm): 1555/1625; Overall Width B (mm): 540/680; Fork Size L2 (mm): 540x150/680x1220; Travel Speed (laden/unladen) (km/h): 4/4.5; Max. Gradeability (laden/unladen) (%): LEP-15MH: 8%/20%; LEP-20MH: 5%/20%; Battery Voltage/Capacity (V/Ah): 24V/20Ah Li-Battery.
The specification sheet records Turning Radius R (mm): 1352/1422; Travel Motor: 750w.
Options and attachments are listed separately from the base chassis.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Dimensions in the table come from the source record.
Note any attachment that changes the load centre or the overall width.
Match the power arrangement to the shifts and the working environment.
Review the tyre type against the surface the machine will run on.
Compare capacity first, then the lift height the job actually needs.
On the Economic electric pallet truck, keep the charging or refuelling position clear of the main traffic aisle.
Check headroom under beams, pipes and door frames along the route.
On the Economic electric pallet truck, send photographs of the racking and the existing working area when possible.
Measure the pallet footprint and the heaviest single load before comparing models.
On the Economic electric pallet truck, state the shifts per day so the power arrangement can be sized properly.
On the Economic electric pallet truck, unusual noise or movement is reported before further use.
Routine checks cover tyres, brakes, controls and visible leaks.
On the Economic electric pallet truck, the working area is kept clear of loose packaging and obstacles.
Attachments are secured before the machine leaves the station.
On the Economic electric pallet truck, spare parts for wear items follow the parts manual after delivery.
The layout drawing shows where each machine sits in the operation.
On the Economic electric pallet truck, a mixed enquiry can list this model together with other families.
The receiving side pairs it with a dock ramp or platform where needed.
On the Economic electric pallet truck, any option not listed should be confirmed in writing before order.
Tyre choice should match the floor rather than the price list.
On the Economic electric pallet truck, site conditions such as gradient, dust and moisture belong in the enquiry.
Capacity above the rated lift height follows the mast curve.
On the Economic electric pallet truck, quote the serial number and component name when ordering spares.
The booking reference is issued with the proforma invoice.
On the Economic electric pallet truck, loading is recorded before the container is sealed.
The enquiry should include the quantity and destination port.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
Questions
The specification sheet lists 195 for this build. Send the rack beam and door heights together to size the mast.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.