TFY35 Air/Hyd.table truck, rated capacity 350Kg. Lift tables raise a pallet or work piece to a comfortable height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TFY35 |
| Load Capacity | 350 kg |
| Lowest Height | 345 mm |
| Max. Height | 1300 mm |
| Table Dimensions | 905×512×55 mm |
| Total Length | 1300 mm |
| Length of Handle | 980 mm |
| Net Weight | 123 kg |
TFY35 Air/Hyd.table truck, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Production cell feeding
Published figures for this build: rated capacity 350 kg.
Lowered height decides how a pallet can be driven onto the deck.
They reduce bending and manual lifting at packing stations and docks.
Lift tables raise a pallet or work piece to a comfortable height.
Lowered height decides how a pallet can be driven onto the deck.
Note cold store, outdoor gradient or container entry as a constraint. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: TFY35; Load Capacity (kg): 350 kg; Lowest Height (mm): 345 mm; Max. Height (mm): 1300 mm; Table Dimensions (mm): 905×512×55 mm; Total Length (mm): 1300 mm.
The specification sheet records Length of Handle (mm): 980 mm; Net Weight (kg): 123 kg.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
The listed figures follow the record; options are confirmed on the quotation.
Compare the lowered height against the lowest door on the route.
Check the machine weight against floor loading where the site is raised.
Check the chassis width against the aisle and the container door.
Compare capacity first, then the lift height the job actually needs.
On the TFY35, note any slope, threshold or step along the working route.
Check the lowest door, beam height and aisle the truck has to pass through.
On the TFY35, check headroom under beams, pipes and door frames along the route.
State the shifts per day so the power arrangement can be sized properly.
On the TFY35, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the TFY35, the working area is kept clear of loose packaging and obstacles.
Routine checks cover tyres, brakes, controls and visible leaks.
On the TFY35, battery or fuel levels are checked at the start of each shift.
The operator checks load stability before each lift or move.
On the TFY35, the receiving side pairs it with a dock ramp or platform where needed.
Related models in the same group are listed on the family page.
On the TFY35, spare parts for wear items follow the parts manual after delivery.
A mixed enquiry can list this model together with other families.
On the TFY35, capacity above the rated lift height follows the mast curve.
The specification sheet is the binding reference for listed values.
On the TFY35, the signed datasheet issued with the quotation is the binding version.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the TFY35, wear parts are supplied after delivery against the parts manual.
Documents issued for an order are listed in the quotation.
On the TFY35, quote the serial number and component name when ordering spares.
The enquiry should include the quantity and destination port.
Test and conformity documents follow the model and destination market.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 350Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 123 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.