Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Motorcycle Lift

Motorcycle Lift Jack Series. Selection starts from the load per move and the space around it.

Motorcycle Lift — product photo 1 of 4

Ordering facts for the Motorcycle Lift

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Motorcycle Lift specification

Values are copied from the source record in their original order and units.

Motorcycle Lift specification table
ParameterValue
Model/ Min Ht(mm) / Max Ht(mm) / Table size(mm) / Ramp size(mm) / N.W(kg) / G.W.(kg) / Packing size(cm) / 40'CNTR(PCS)
T31081800 / 205 / 780 / 1345x490 / 855x491 / 95 / 118 / 153x69x26 / 192
T31082800 / 205 / 780 / 1345x490 / 855x490 / 96 / 116 / 153x69x26 / 192
T311011000 / 195 / 780 / 1825x660 / 690x660 / 130 / 168 / 210x85x25 / 126
T311021000 / 195 / 780 / 1825x660 / 690x660 / 127 / 164 / 210x81x25 / 126
T31103A1000 / 175 / 750 / 2060x550 / 650x550 / 121 / 151 / 216x64x23 / 162
T31103B1000 / 175 / 750 / 2100x600 / 650x600 / 124 / 153 / 219x69x20 / 170
T31103C1000 / 175 / 750 / 2150x640 / 650x640 / 127 / 158 / 222x72x20 / 160
T31103D1000 / 175 / 750 / 2200x680 / 650x680 / 130 / 163 / 228x76x20 / 150
T31104A1000 / 175 / 750 / 2060x550 / 650x550 / 129 / 159 / 216x65x23 / 162
T31104B1000 / 175 / 750 / 2100x600 / 650x600 / 132 / 161 / 219x69x20 / 165
T31104C1000 / 175 / 750 / 2150x640 / 650x640 / 135 / 166 / 223x72x20 / 160
T31104D1000 / 175 / 750 / 2200x680 / 650x680 / 138 / 171 / 228x76x20 / 150
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Motorcycle Lift Jack Series, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Manual pallet jack duty

Each build is quoted line by line once the duty cycle is confirmed.

Dimensions on the datasheet are checked against the site layout.

This item belongs to the broader SUNRISE material handling catalogue.

Each build is quoted line by line once the duty cycle is confirmed.

Match the tyre type to the floor surface rather than the price list. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records Model (lb): / Min Ht(mm) / Max Ht(mm) / Table size(mm) / Ramp size(mm) / N.W(kg) / G.W.(kg) / Packing size(cm) / 40'CNTR(PCS); T31081: 800 / 205 / 780 / 1345x490 / 855x491 / 95 / 118 / 153x69x26 / 192; T31082: 800 / 205 / 780 / 1345x490 / 855x490 / 96 / 116 / 153x69x26 / 192; T31101: 1000 / 195 / 780 / 1825x660 / 690x660 / 130 / 168 / 210x85x25 / 126; T31102: 1000 / 195 / 780 / 1825x660 / 690x660 / 127 / 164 / 210x81x25 / 126; T31103A: 1000 / 175 / 750 / 2060x550 / 650x550 / 121 / 151 / 216x64x23 / 162.

The specification sheet records T31103B: 1000 / 175 / 750 / 2100x600 / 650x600 / 124 / 153 / 219x69x20 / 170; T31103C: 1000 / 175 / 750 / 2150x640 / 650x640 / 127 / 158 / 222x72x20 / 160; T31103D: 1000 / 175 / 750 / 2200x680 / 650x680 / 130 / 163 / 228x76x20 / 150; T31104A: 1000 / 175 / 750 / 2060x550 / 650x550 / 129 / 159 / 216x65x23 / 162; T31104B: 1000 / 175 / 750 / 2100x600 / 650x600 / 132 / 161 / 219x69x20 / 165; T31104C: 1000 / 175 / 750 / 2150x640 / 650x640 / 135 / 166 / 223x72x20 / 160.

The specification sheet records T31104D: 1000 / 175 / 750 / 2200x680 / 650x680 / 138 / 171 / 228x76x20 / 150.

An em dash marks a value the source record did not publish.

Those missing values can be requested directly through the enquiry form.

Rated figures apply at the standard load centre unless a row says otherwise.

Each row in the table keeps the label and value from the source record.

How to specify the right build

Configuration follows the load, working height and site layout.

Measure the pallet footprint before the chassis is shortlisted.

The listed figures follow the record; options are confirmed on the quotation.

Compare the lowered height against the lowest door on the route.

Review the tyre type against the surface the machine will run on.

Check the machine weight against floor loading where the site is raised.

Note any attachment that changes the load centre or the overall width.

  • List the load per move, lift height and floor surface before comparing models.
  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.

Site preparation and operating notes

On the Motorcycle Lift, measure the pallet footprint and the heaviest single load before comparing models.

Send photographs of the racking and the existing working area when possible.

On the Motorcycle Lift, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

State the shifts per day so the power arrangement can be sized properly.

On the Motorcycle Lift, list the attachments required, such as clamps, sideshift or rotator.

Operation and routine checks

On the Motorcycle Lift, the operator checks load stability before each lift or move.

The working area is kept clear of loose packaging and obstacles.

On the Motorcycle Lift, loads are kept low while travelling between stations.

The operator follows the rated capacity marked on the chassis.

How this model fits the operation

On the Motorcycle Lift, the layout drawing shows where each machine sits in the operation.

The receiving side pairs it with a dock ramp or platform where needed.

On the Motorcycle Lift, spare parts for wear items follow the parts manual after delivery.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the Motorcycle Lift, site conditions such as gradient, dust and moisture belong in the enquiry.

Tyre choice should match the floor rather than the price list.

On the Motorcycle Lift, attachments are quoted separately once the base chassis is fixed.

Any option not listed should be confirmed in writing before order.

Delivery, documents and support

On the Motorcycle Lift, quotations follow the model, listed specification and destination port.

The booking reference is issued with the proforma invoice.

On the Motorcycle Lift, documents issued for an order are listed in the quotation.

Loading is recorded before the container is sealed.

The operation material covers controls, checks and routine service points.

Ask for the specific certificate required for your target country.

Test and conformity documents follow the model and destination market.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
ST880X———Manual pallet jack duty

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.