Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

GZT200A / 200A-1 — Hand Truck

GZT200A / 200A-1 Hand Truck. Dimensions on the datasheet are checked against the site layout.

GZT200A / 200A-1 Hand Truck — product photo 1 of 2

Ordering facts for the GZT200A / 200A-1

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

GZT200A / 200A-1 specification

Values are copied from the source record in their original order and units.

GZT200A / 200A-1 specification table
ParameterValue
Handle Height H1550
Handle Height H1350
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

GZT200A / 200A-1 Hand Truck, part of the Special-purpose handling equipment line.

Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.

Hand carrying and moving loads

This item belongs to the broader SUNRISE material handling catalogue.

The machine is specified against the load, floor and working height.

This item belongs to the broader SUNRISE material handling catalogue.

The enquiry should describe the station the equipment works at.

Confirm the aisle width against the pallet depth before choosing a chassis. Describe the shifts per day when the power arrangement is selected.

Specification walk-through

The specification sheet records Specification is not published in the source record; Handle Height H (mm): 1550; Platform Length L is not published in the source record; Platform Width W is not published in the source record; Specification is not published in the source record; Handle Height H (mm): 1350.

The specification sheet records Platform Length L is not published in the source record; Platform Width W is not published in the source record.

An em dash marks a value the source record did not publish.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

Rated figures apply at the standard load centre unless a row says otherwise.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

Door and beam heights decide which mast will clear the route.

Match the power arrangement to the shifts and the working environment.

Note any attachment that changes the load centre or the overall width.

List the models that clear each constraint before asking for a quote.

Check the machine weight against floor loading where the site is raised.

  • Mark the stations where loads are picked up and dropped off each shift.
  • List the load per move, lift height and floor surface before comparing models.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the GZT200A / 200A-1, check the lowest door, beam height and aisle the truck has to pass through.

Keep the charging or refuelling position clear of the main traffic aisle.

On the GZT200A / 200A-1, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

List the attachments required, such as clamps, sideshift or rotator.

On the GZT200A / 200A-1, send photographs of the racking and the existing working area when possible.

Operation and routine checks

On the GZT200A / 200A-1, attachments are secured before the machine leaves the station.

Loads are kept low while travelling between stations.

On the GZT200A / 200A-1, the working area is kept clear of loose packaging and obstacles.

Routine checks cover tyres, brakes, controls and visible leaks.

How this model fits the operation

On the GZT200A / 200A-1, the layout drawing shows where each machine sits in the operation.

A mixed enquiry can list this model together with other families.

On the GZT200A / 200A-1, spare parts for wear items follow the parts manual after delivery.

The receiving side pairs it with a dock ramp or platform where needed.

Working conditions and honest limits

On the GZT200A / 200A-1, site conditions such as gradient, dust and moisture belong in the enquiry.

The signed datasheet issued with the quotation is the binding version.

On the GZT200A / 200A-1, capacity above the rated lift height follows the mast curve.

Dimensions are checked against the source record before quoting.

Delivery, documents and support

On the GZT200A / 200A-1, the booking reference is issued with the proforma invoice.

Documents issued for an order are listed in the quotation.

On the GZT200A / 200A-1, the enquiry should include the quantity and destination port.

Loading is recorded before the container is sealed.

Test and conformity documents follow the model and destination market.

Ask for the specific certificate required for your target country.

The serial number identifies the build when parts are ordered later.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Special-purpose handling equipment related models

ModelCapacityLiftPowerTypical use
WCR-120E/030C———Site-specific lifting and moving tasks
WPR-10———Site-specific lifting and moving tasks
ST02(2ton———Manual pallet jack duty
STFL32X———Lifting and moving pallets
ST880X———Manual pallet jack duty

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.