GZT150B / 150C / 150D Hand Truck. Each build is quoted line by line once the duty cycle is confirmed.

Specification
The source record did not publish a parameter table for this model. The listed figures below are limited to what the record confirms; request the missing parameters through the enquiry form.
GZT150B / 150C / 150D Hand Truck, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Pushed hand-truck transport
The enquiry should describe the station the equipment works at.
The enquiry should describe the station the equipment works at.
The machine is specified against the load, floor and working height.
Each build is quoted line by line once the duty cycle is confirmed.
Match the tyre type to the floor surface rather than the price list. Describe the shifts per day when the power arrangement is selected.
The published parameters for this build are listed in the specification table.
Items the source record did not publish are shown as an em dash in the table.
Those missing items can be asked for directly through the enquiry form.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Measure the pallet footprint before the chassis is shortlisted.
Check the chassis width against the aisle and the container door.
Compare the lowered height against the lowest door on the route.
Check the machine weight against floor loading where the site is raised.
Compare capacity first, then the lift height the job actually needs.
On the GZT150B / 150C / 150D, state the shifts per day so the power arrangement can be sized properly.
Send photographs of the racking and the existing working area when possible.
On the GZT150B / 150C / 150D, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check the lowest door, beam height and aisle the truck has to pass through.
On the GZT150B / 150C / 150D, mark the stations where loads are picked up and dropped off each shift.
On the GZT150B / 150C / 150D, the working area is kept clear of loose packaging and obstacles.
Attachments are secured before the machine leaves the station.
On the GZT150B / 150C / 150D, battery or fuel levels are checked at the start of each shift.
Loads are kept low while travelling between stations.
On the GZT150B / 150C / 150D, a mixed enquiry can list this model together with other families.
Spare parts for wear items follow the parts manual after delivery.
On the GZT150B / 150C / 150D, related models in the same group are listed on the family page.
The layout drawing shows where each machine sits in the operation.
On the GZT150B / 150C / 150D, any option not listed should be confirmed in writing before order.
Attachments are quoted separately once the base chassis is fixed.
On the GZT150B / 150C / 150D, the specification sheet is the binding reference for listed values.
Tyre choice should match the floor rather than the price list.
On the GZT150B / 150C / 150D, quote the serial number and component name when ordering spares.
Mixed equipment can be listed on one enquiry.
On the GZT150B / 150C / 150D, documents issued for an order are listed in the quotation.
The enquiry should include the quantity and destination port.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.