TFY75 Air/Hyd.table truck, rated capacity 750Kg. Lowered height decides how a pallet can be driven onto the deck.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TFY75 |
| Load Capacity | 750 kg |
| Lowest Height | 500 mm |
| Max. Height | 1700 mm |
| Table Dimensions | 1200×610×55 mm |
| Total Length | 1600 mm |
| Length of Handle | 1000 mm |
| Net Weight | 240 kg |
TFY75 Air/Hyd.table truck, part of the Lift tables line.
Hydraulic, air-hydraulic and electric lift tables for dock feeding and work positioning.
Dock feeding and packing
Published figures for this build: rated capacity 750 kg.
Scissor mechanisms carry the load vertically, with hydraulic or electric drive.
Lowered height decides how a pallet can be driven onto the deck.
They reduce bending and manual lifting at packing stations and docks.
They reduce bending and manual lifting at packing stations and docks.
Note cold store, outdoor gradient or container entry as a constraint. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Model: TFY75; Load Capacity (kg): 750 kg; Lowest Height (mm): 500 mm; Max. Height (mm): 1700 mm; Table Dimensions (mm): 1200×610×55 mm; Total Length (mm): 1600 mm.
The specification sheet records Length of Handle (mm): 1000 mm; Net Weight (kg): 240 kg.
Those missing values can be requested directly through the enquiry form.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
Dimensions in the table come from the source record.
Check the machine weight against floor loading where the site is raised.
Compare the lowered height against the lowest door on the route.
Compare capacity first, then the lift height the job actually needs.
Check the chassis width against the aisle and the container door.
On the TFY75, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Measure the pallet footprint and the heaviest single load before comparing models.
On the TFY75, keep the charging or refuelling position clear of the main traffic aisle.
Note any slope, threshold or step along the working route.
On the TFY75, list the attachments required, such as clamps, sideshift or rotator.
On the TFY75, loads are kept low while travelling between stations.
The working area is kept clear of loose packaging and obstacles.
On the TFY75, attachments are secured before the machine leaves the station.
The operator checks load stability before each lift or move.
On the TFY75, spare parts for wear items follow the parts manual after delivery.
A mixed enquiry can list this model together with other families.
On the TFY75, the receiving side pairs it with a dock ramp or platform where needed.
The layout drawing shows where each machine sits in the operation.
On the TFY75, site conditions such as gradient, dust and moisture belong in the enquiry.
The specification sheet is the binding reference for listed values.
On the TFY75, any option not listed should be confirmed in writing before order.
Tyre choice should match the floor rather than the price list.
On the TFY75, quotations follow the model, listed specification and destination port.
The operation and parts material travel with the machine.
On the TFY75, packing follows sea-freight practice for the chosen chassis.
Mixed equipment can be listed on one enquiry.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
Questions
The listed rated capacity is 750Kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 240 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.