6ton electric pallet truck 6ton electric pallet truck, rated capacity 6000 kg, Battery, lift height 110. Hand and powered pallet trucks are the first dock unloading tool.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | ME60 |
| Power unit | Battery |
| Operation | Stand-on |
| Load capacity | 6000 |
| Load center | 600 |
| Axle centre to fork face | 980/935 |
| Wheelbase | 1524/1480 |
| Service weight | 1300 |
| Tyre,operator/load side | PU WHEEL |
| Tyre size,load | Φ90×80 |
| Tyre size,drive | Φ254×100 |
| Auxiliary wheel size | Φ125×50 |
| Wheels number,front/back | 8/1X+4 |
| Tread, drive | 630 |
| Tread, load | 460 |
| Overall height | h15 1420 |
| Lift height | 110 |
| stand height | 180 |
| Overall length | 1945/2390 |
| Overall width | 850 |
| Fork dimensions | l/e/s(mm) 1200/255/87 |
| Fork height,lowered | 95 |
| Fork spread | 715 |
| Ground clearance,centre of wheelbase | 55 |
| Aisle width,1000X1200 pallet,crosswise | 2250/2690 |
| Aisle width,800X1200 pallet,lengthwise | 2300/2740 |
| Turning radius | 1900/2320 |
| Travel speed,with/without load | 4.0/4.5 |
| Lifting speed,with/without load | mm/s 29/35 |
| Lowering speed,with/without load | mm/s 29/16 |
| Max. climbing ability,with/without load | %(tanθ ) 4/8 |
| Service brake | Electric |
| Drive motor rating | 2.5 ( AC) |
| Battery voltage/rated capacity | 24/270 |
| Battery weight | 240 |
| Steering System | Electric |
Gallery
All detail images published for this model.



6ton electric pallet truck 6ton electric pallet truck, part of the Pallet trucks line.
Hand, semi-electric and powered pallet trucks for horizontal pallet transport.
Floor pallet moving
Published figures for this build: rated capacity 6000 kg, lift height 110 mm, overall width 850 mm, turning radius 2250/2690, tyre pu wheel.
Pallet trucks move palletised loads across a floor or into a container.
Powered versions reduce walking distance on long warehouse runs.
Powered versions reduce walking distance on long warehouse runs.
Powered versions reduce walking distance on long warehouse runs.
Check closed mast or chassis height against the lowest door on the route. State any attachment required alongside the base model.
The specification sheet records Model: ME60; Power unit: Battery; Operation: Stand-on; Load capacity (kg): 6000; Load center (mm): 600; Axle centre to fork face (mm): 980/935.
The specification sheet records Wheelbase (mm): 1524/1480; Service weight (with battery): 1300; Axle loading, laden drive/load is not published in the source record; Axle loading, unladen drive/load is not published in the source record; Tyre,operator/load side: PU WHEEL; Tyre size,load (mm): Φ90×80.
The specification sheet records Tyre size,drive (mm): Φ254×100; Auxiliary wheel size (mm): Φ125×50; Wheels number,front/back (x=driven): 8/1X+4; Tread, drive (mm): 630; Tread, load (mm): 460; Overall height: h15 1420.
The specification sheet records Lift height (mm): 110; stand height (mm): 180; Overall length (mm): 1945/2390; Overall width (mm): 850; Fork dimensions: l/e/s(mm) 1200/255/87; Fork height,lowered (mm): 95.
The specification sheet records Fork spread (mm): 715; Ground clearance,centre of wheelbase (mm): 55; Aisle width,1000X1200 pallet,crosswise (mm): 2250/2690; Aisle width,800X1200 pallet,lengthwise (mm): 2300/2740; Turning radius (mm): 1900/2320; Travel speed,with/without load (km/h): 4.0/4.5.
The specification sheet records Lifting speed,with/without load: mm/s 29/35; Lowering speed,with/without load: mm/s 29/16; Max. climbing ability,with/without load (S2-5min): %(tanθ ) 4/8; Service brake: Electric; Drive motor rating (S2-60 min): 2.5 ( AC); Battery voltage/rated capacity (v/ah): 24/270.
The specification sheet records Battery weight (kg): 240; Steering System: Electric.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
For an electric chassis, the main choices are battery capacity, mast type and attachment.
The listed figures follow the record; options are confirmed on the quotation.
Door and beam heights decide which mast will clear the route.
Check the chassis width against the aisle and the container door.
Compare capacity first, then the lift height the job actually needs.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
On the 6ton electric pallet truck, state the shifts per day so the power arrangement can be sized properly.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the 6ton electric pallet truck, measure the pallet footprint and the heaviest single load before comparing models.
Check headroom under beams, pipes and door frames along the route.
On the 6ton electric pallet truck, list the attachments required, such as clamps, sideshift or rotator.
On the 6ton electric pallet truck, routine checks cover tyres, brakes, controls and visible leaks.
The working area is kept clear of loose packaging and obstacles.
On the 6ton electric pallet truck, loads are kept low while travelling between stations.
Battery or fuel levels are checked at the start of each shift.
On the 6ton electric pallet truck, related models in the same group are listed on the family page.
Spare parts for wear items follow the parts manual after delivery.
On the 6ton electric pallet truck, the layout drawing shows where each machine sits in the operation.
Storage cages and racking organise the loads it moves between stations.
On the 6ton electric pallet truck, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the 6ton electric pallet truck, attachments are quoted separately once the base chassis is fixed.
Tyre choice should match the floor rather than the price list.
On the 6ton electric pallet truck, packing follows sea-freight practice for the chosen chassis.
The operation and parts material travel with the machine.
On the 6ton electric pallet truck, mixed equipment can be listed on one enquiry.
Loading is recorded before the container is sealed.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 6000 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification sheet lists 110 for this build. Send the rack beam and door heights together to size the mast.
The listed power arrangement is Battery. Confirm the supply voltage or fuel type for your site before ordering.
The listed tyre type is PU WHEEL. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.
The specification lists a load centre of 600. Loads carried farther forward reduce rated capacity.
The listed service or net weight is 1300 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.