6 wheels climb stair steel hand truck SR150T 6 wheels climb stair steel hand truck SR150T, rated capacity 150kgs. This item belongs to the broader SUNRISE material handling catalogue.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SR150T |
| Material | Steel |
| Overall size | 1470×600×530mm |
| Dimension of foot plate | 310×170×3mm |
| Wheel size | 150mm |
| Capacity | 150kgs |
| N.W. | 15kgs |
Gallery
All detail images published for this model.









6 wheels climb stair steel hand truck SR150T 6 wheels climb stair steel hand truck SR150T, part of the Special-purpose handling equipment line.
Hand trucks and trolleys, stair-climbing carts, paper-roll and coil clamps, forklift attachments, jacks and other auxiliary tools that do not fit the powered-vehicle families.
Light load manual handling
Published figures for this build: rated capacity 150kgs.
Selection starts from the load per move and the space around it.
Dimensions on the datasheet are checked against the site layout.
Selection starts from the load per move and the space around it.
This item belongs to the broader SUNRISE material handling catalogue.
Note cold store, outdoor gradient or container entry as a constraint. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Model: SR150T; Material: Steel; Overall size (LxWxH): 1470×600×530mm; Dimension of foot plate: 310×170×3mm; Wheel size: 150mm; Capacity: 150kgs.
The specification sheet records N.W.: 15kgs.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
The enquiry should list any attachment the job requires.
Match the power arrangement to the shifts and the working environment.
Check the machine weight against floor loading where the site is raised.
Review the tyre type against the surface the machine will run on.
Compare capacity first, then the lift height the job actually needs.
On the 6 wheels climb stair steel hand truck SR150T, mark the stations where loads are picked up and dropped off each shift.
List the attachments required, such as clamps, sideshift or rotator.
On the 6 wheels climb stair steel hand truck SR150T, check headroom under beams, pipes and door frames along the route.
Note any slope, threshold or step along the working route.
On the 6 wheels climb stair steel hand truck SR150T, measure the pallet footprint and the heaviest single load before comparing models.
On the 6 wheels climb stair steel hand truck SR150T, attachments are secured before the machine leaves the station.
The working area is kept clear of loose packaging and obstacles.
On the 6 wheels climb stair steel hand truck SR150T, routine checks cover tyres, brakes, controls and visible leaks.
Battery or fuel levels are checked at the start of each shift.
On the 6 wheels climb stair steel hand truck SR150T, attachments such as clamps or rotators are matched to the load shape.
The layout drawing shows where each machine sits in the operation.
On the 6 wheels climb stair steel hand truck SR150T, related models in the same group are listed on the family page.
Spare parts for wear items follow the parts manual after delivery.
On the 6 wheels climb stair steel hand truck SR150T, capacity above the rated lift height follows the mast curve.
The signed datasheet issued with the quotation is the binding version.
On the 6 wheels climb stair steel hand truck SR150T, dimensions are checked against the source record before quoting.
Attachments are quoted separately once the base chassis is fixed.
On the 6 wheels climb stair steel hand truck SR150T, wear parts are supplied after delivery against the parts manual.
Documents issued for an order are listed in the quotation.
On the 6 wheels climb stair steel hand truck SR150T, quote the serial number and component name when ordering spares.
Mixed equipment can be listed on one enquiry.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
Questions
The listed rated capacity is 150kgs at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Special-purpose handling equipment related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.