YTC 0.3A / YTC 0.3B Drum Equipment, rated capacity 300. Rotation is used for dispensing or emptying a handled drum.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | YTC 0.3A / YTC 0.3B |
| Capacity | 300 |
| Max.lifting height | 400 / 200 |
| Overall size | 1025x915x1180 / 850X985X961 |
| Self Weight | 80 / 50 |
Gallery
All detail images published for this model.

YTC 0.3A / YTC 0.3B Drum Equipment, part of the Drum handlers line.
Drum carriers, clamps and rotators for lifting, tipping and moving cylindrical containers.
Bulk packing drum moves
Published figures for this build: rated capacity 300 kg.
The attachment fits a pallet truck or forklift already in use.
Rotation is used for dispensing or emptying a handled drum.
Clamps and grippers hold the drum body while the carrier moves it.
Rotation is used for dispensing or emptying a handled drum.
Note cold store, outdoor gradient or container entry as a constraint. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: YTC 0.3A / YTC 0.3B; Capacity (kg): 300; Max.lifting height (mm): 400 / 200; Overall size (mm): 1025x915x1180 / 850X985X961; Self Weight (kg): 80 / 50.
Remaining parameters are listed row by row in the specification table.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
The listed figures follow the record; options are confirmed on the quotation.
Compare capacity first, then the lift height the job actually needs.
Review the tyre type against the surface the machine will run on.
Compare the lowered height against the lowest door on the route.
Check the chassis width against the aisle and the container door.
On the YTC 0.3A / YTC 0.3B, list the attachments required, such as clamps, sideshift or rotator.
Mark the stations where loads are picked up and dropped off each shift.
On the YTC 0.3A / YTC 0.3B, state the shifts per day so the power arrangement can be sized properly.
Keep the charging or refuelling position clear of the main traffic aisle.
On the YTC 0.3A / YTC 0.3B, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the YTC 0.3A / YTC 0.3B, battery or fuel levels are checked at the start of each shift.
Routine checks cover tyres, brakes, controls and visible leaks.
On the YTC 0.3A / YTC 0.3B, the operator checks load stability before each lift or move.
Loads are kept low while travelling between stations.
On the YTC 0.3A / YTC 0.3B, spare parts for wear items follow the parts manual after delivery.
The layout drawing shows where each machine sits in the operation.
On the YTC 0.3A / YTC 0.3B, related models in the same group are listed on the family page.
Attachments such as clamps or rotators are matched to the load shape.
On the YTC 0.3A / YTC 0.3B, dimensions are checked against the source record before quoting.
Any option not listed should be confirmed in writing before order.
On the YTC 0.3A / YTC 0.3B, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the YTC 0.3A / YTC 0.3B, loading is recorded before the container is sealed.
Wear parts are supplied after delivery against the parts manual.
On the YTC 0.3A / YTC 0.3B, the enquiry should include the quantity and destination port.
Quote the serial number and component name when ordering spares.
The serial number identifies the build when parts are ordered later.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
Questions
The listed rated capacity is 300 at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.