SD30 / SD55A / SD55B / SD55C / SD55D Drum Equipment. Chemicals, oils and food bulk packing are common drum duties.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SD30 / SD55A / SD55B / SD55C / SD55D |
| Capacity | 300 / 400 |
| NetWeight | 5.8 / 6.8 / 7.5 / 5.5 / 5.7 |
| OverallSize | Φ510×150 / Φ610×150 / Φ730×150 |
| WheelSize | Φ75×35 |
Gallery
All detail images published for this model.


SD30 / SD55A / SD55B / SD55C / SD55D Drum Equipment, part of the Drum handlers line.
Drum carriers, clamps and rotators for lifting, tipping and moving cylindrical containers.
Cylindrical container handling
Published figures for this build: rated capacity 300 / 400.
Grip diameter matches the drum body size and material.
Rotation is used for dispensing or emptying a handled drum.
The attachment fits a pallet truck or forklift already in use.
Rotation is used for dispensing or emptying a handled drum.
Confirm the charger voltage or fuel type for your destination country. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: SD30 / SD55A / SD55B / SD55C / SD55D; Capacity (kg): 300 / 400; NetWeight (kg): 5.8 / 6.8 / 7.5 / 5.5 / 5.7; OverallSize (mm): Φ510×150 / Φ610×150 / Φ730×150; WheelSize (mm): Φ75×35.
Remaining parameters are listed row by row in the specification table.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
Send pallet size, door height and aisle width with the enquiry.
Check the machine weight against floor loading where the site is raised.
Compare capacity first, then the lift height the job actually needs.
Review the tyre type against the surface the machine will run on.
Compare the lowered height against the lowest door on the route.
On the SD30 / SD55A / SD55B / SD55C / SD55D, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
State the shifts per day so the power arrangement can be sized properly.
On the SD30 / SD55A / SD55B / SD55C / SD55D, mark the stations where loads are picked up and dropped off each shift.
List the attachments required, such as clamps, sideshift or rotator.
On the SD30 / SD55A / SD55B / SD55C / SD55D, keep the charging or refuelling position clear of the main traffic aisle.
On the SD30 / SD55A / SD55B / SD55C / SD55D, loads are kept low while travelling between stations.
Battery or fuel levels are checked at the start of each shift.
On the SD30 / SD55A / SD55B / SD55C / SD55D, unusual noise or movement is reported before further use.
The working area is kept clear of loose packaging and obstacles.
On the SD30 / SD55A / SD55B / SD55C / SD55D, spare parts for wear items follow the parts manual after delivery.
Storage cages and racking organise the loads it moves between stations.
On the SD30 / SD55A / SD55B / SD55C / SD55D, attachments such as clamps or rotators are matched to the load shape.
Related models in the same group are listed on the family page.
On the SD30 / SD55A / SD55B / SD55C / SD55D, any option not listed should be confirmed in writing before order.
Capacity above the rated lift height follows the mast curve.
On the SD30 / SD55A / SD55B / SD55C / SD55D, the signed datasheet issued with the quotation is the binding version.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the SD30 / SD55A / SD55B / SD55C / SD55D, the operation and parts material travel with the machine.
The enquiry should include the quantity and destination port.
On the SD30 / SD55A / SD55B / SD55C / SD55D, packing follows sea-freight practice for the chosen chassis.
Wear parts are supplied after delivery against the parts manual.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.