YTC 0.3A / YTC 0.3B Drum Equipment, rated capacity 300. Chemicals, oils and food bulk packing are common drum duties.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | YTC 0.3A / YTC 0.3B |
| Capacity | 300 |
| Max.lifting height | 400 / 200 |
| Overall size | 1025x915x1180 / 850X985X961 |
| Self Weight | 80 / 50 |
Gallery
All detail images published for this model.


YTC 0.3A / YTC 0.3B Drum Equipment, part of the Drum handlers line.
Drum carriers, clamps and rotators for lifting, tipping and moving cylindrical containers.
Bulk packing drum moves
Published figures for this build: rated capacity 300 kg.
Drum handlers lift, rotate and transport drums without manual tilting.
Clamps and grippers hold the drum body while the carrier moves it.
Rotation is used for dispensing or emptying a handled drum.
Clamps and grippers hold the drum body while the carrier moves it.
Confirm the charger voltage or fuel type for your destination country. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Model: YTC 0.3A / YTC 0.3B; Capacity (kg): 300; Max.lifting height (mm): 400 / 200; Overall size (mm): 1025x915x1180 / 850X985X961; Self Weight (kg): 80 / 50.
Remaining parameters are listed row by row in the specification table.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
The enquiry should list any attachment the job requires.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
Check the machine weight against floor loading where the site is raised.
Compare the lowered height against the lowest door on the route.
On the YTC 0.3A / YTC 0.3B, list the attachments required, such as clamps, sideshift or rotator.
Note any slope, threshold or step along the working route.
On the YTC 0.3A / YTC 0.3B, measure the pallet footprint and the heaviest single load before comparing models.
Keep the charging or refuelling position clear of the main traffic aisle.
On the YTC 0.3A / YTC 0.3B, check headroom under beams, pipes and door frames along the route.
On the YTC 0.3A / YTC 0.3B, battery or fuel levels are checked at the start of each shift.
The operator checks load stability before each lift or move.
On the YTC 0.3A / YTC 0.3B, routine checks cover tyres, brakes, controls and visible leaks.
Attachments are secured before the machine leaves the station.
On the YTC 0.3A / YTC 0.3B, this machine usually works alongside pallet trucks and stacking equipment.
Attachments such as clamps or rotators are matched to the load shape.
On the YTC 0.3A / YTC 0.3B, spare parts for wear items follow the parts manual after delivery.
Related models in the same group are listed on the family page.
On the YTC 0.3A / YTC 0.3B, the specification sheet is the binding reference for listed values.
Attachments are quoted separately once the base chassis is fixed.
On the YTC 0.3A / YTC 0.3B, dimensions are checked against the source record before quoting.
Capacity above the rated lift height follows the mast curve.
On the YTC 0.3A / YTC 0.3B, the enquiry should include the quantity and destination port.
The operation and parts material travel with the machine.
On the YTC 0.3A / YTC 0.3B, documents issued for an order are listed in the quotation.
Quote the serial number and component name when ordering spares.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 300 at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.