Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

DTF450A / DTF450A-1 / DTF450B / DTF450B-1 — drum handler

DTF450A / DTF450A-1 / DTF450B / DTF450B-1 Drum Equipment, rated capacity 450, lift height 600. Clamps and grippers hold the drum body while the carrier moves it.

DTF450A / DTF450A-1 / DTF450B / DTF450B-1 drum handler — product photo 1 of 5

Ordering facts for the DTF450A / DTF450A-1 / DTF450B / DTF450B-1

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

DTF450A / DTF450A-1 / DTF450B / DTF450B-1 specification

Values are copied from the source record in their original order and units.

DTF450A / DTF450A-1 / DTF450B / DTF450B-1 specification table
ParameterValue
ModelDTF450A / DTF450A-1 / DTF450B / DTF450B-1
Capacity450
NetWeight103 / 120 / 105 / 122
HydraulicLifting√
Electric Scale√
Lifting Height600
Front Wheel SizeΦ150×50
Rear Wheel SizeΦ125×50
Front Leg Ins&Out Width670、850 / 920、1140
Front Leg Length600 / 500
Overall size1080×850×1370 / 1140×950×1370
Weighing Displaying Charger6
ModelDTF450C / DTF450C-1
Capacity450
NetWeight130 / 135
HydraulicLifting√
Electric Scale√
Lifting Height1100
Front Wheel SizeΦ150×50
Rear Wheel SizeΦ125×50
Front Leg Ins&Out Width920、1140
Front Leg Length500
Overall size1140×950×1870
Weighing Displaying Charger6
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

DTF450A / DTF450A-1 / DTF450B / DTF450B-1 Drum Equipment, part of the Drum handlers line.

Drum carriers, clamps and rotators for lifting, tipping and moving cylindrical containers.

Cylindrical container handling

Published figures for this build: rated capacity 450 kg, lift height 600.

The attachment fits a pallet truck or forklift already in use.

Drum handlers lift, rotate and transport drums without manual tilting.

Clamps and grippers hold the drum body while the carrier moves it.

Grip diameter matches the drum body size and material.

Describe the shifts per day when the power arrangement is selected. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The specification sheet records Model: DTF450A / DTF450A-1 / DTF450B / DTF450B-1; Capacity (kg): 450; NetWeight (kg): 103 / 120 / 105 / 122; HydraulicLifting: √; Electric Scale: √; Lifting Height (mm): 600.

The specification sheet records Front Wheel Size (mm): Φ150×50; Rear Wheel Size (mm): Φ125×50; Front Leg Ins&Out Width (mm): 670、850 / 920、1140; Front Leg Length (mm): 600 / 500; Overall size (mm): 1080×850×1370 / 1140×950×1370; Weighing Displaying Charger (mm): 6.

The specification sheet records Model: DTF450C / DTF450C-1; Capacity (kg): 450; NetWeight (kg): 130 / 135; HydraulicLifting: √; Electric Scale: √; Lifting Height (mm): 1100.

The specification sheet records Front Wheel Size (mm): Φ150×50; Rear Wheel Size (mm): Φ125×50; Front Leg Ins&Out Width (mm): 920、1140; Front Leg Length (mm): 500; Overall size (mm): 1140×950×1870; Weighing Displaying Charger (mm): 6.

An em dash marks a value the source record did not publish.

Each row in the table keeps the label and value from the source record.

Units are copied as published; convert them only when comparing models.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

Send pallet size, door height and aisle width with the enquiry.

Door and beam heights decide which mast will clear the route.

Compare the lowered height against the lowest door on the route.

Compare capacity first, then the lift height the job actually needs.

Review the tyre type against the surface the machine will run on.

Match the power arrangement to the shifts and the working environment.

  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, mark the stations where loads are picked up and dropped off each shift.

List the attachments required, such as clamps, sideshift or rotator.

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, state the shifts per day so the power arrangement can be sized properly.

Keep the charging or refuelling position clear of the main traffic aisle.

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, note any slope, threshold or step along the working route.

Operation and routine checks

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, the operator checks load stability before each lift or move.

Attachments are secured before the machine leaves the station.

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, unusual noise or movement is reported before further use.

The operator follows the rated capacity marked on the chassis.

How this model fits the operation

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, a mixed enquiry can list this model together with other families.

The receiving side pairs it with a dock ramp or platform where needed.

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, spare parts for wear items follow the parts manual after delivery.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, dimensions are checked against the source record before quoting.

Any option not listed should be confirmed in writing before order.

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, the signed datasheet issued with the quotation is the binding version.

Capacity above the rated lift height follows the mast curve.

Delivery, documents and support

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, packing follows sea-freight practice for the chosen chassis.

Documents issued for an order are listed in the quotation.

On the DTF450A / DTF450A-1 / DTF450B / DTF450B-1, mixed equipment can be listed on one enquiry.

Quote the serial number and component name when ordering spares.

The serial number identifies the build when parts are ordered later.

Ask for the specific certificate required for your target country.

The parts manual lists the wear items and their reference views.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What load does the DTF450A / DTF450A-1 / DTF450B / DTF450B-1 carry?+

The listed rated capacity is 450 at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What lift height is available?+

The specification sheet lists 600 for this build. Send the rack beam and door heights together to size the mast.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Drum handlers related models

ModelCapacityLiftPowerTypical use
YTC300——Bulk packing drum moves
YTC300——Bulk packing drum moves
SD30———Cylindrical container handling
DT400———Drum rotation and dispensing
HK285———Drum rotation and dispensing

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.