HK285 / HK300 / LM800 Drum Equipment. Drum handlers lift, rotate and transport drums without manual tilting.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | HK285 / HK300 / LM800 |
| Capacity | 300 / 400 |
| Net Weight | 60 / 63 / 44 |
| Hand Speed Ratio | 0.083333 / 0.459259 |
| Overall Size | 1100×1000×850 / 900×600×950 |
| ForkliftSingle Outrigger Diameter L×H | 150×55 |
| ForkliftOutriggerInside Width | 680 / 420 |
| ForkliftOutriggerOutside Width | 970 / 720 |
| ForkliftOutriggerLength | 755 / 150 |
| Drum Diameter Range | Φ570-Φ600 |
Gallery
All detail images published for this model.



HK285 / HK300 / LM800 Drum Equipment, part of the Drum handlers line.
Drum carriers, clamps and rotators for lifting, tipping and moving cylindrical containers.
Drum rotation and dispensing
Published figures for this build: rated capacity 300 / 400.
Grip diameter matches the drum body size and material.
Grip diameter matches the drum body size and material.
Grip diameter matches the drum body size and material.
Grip diameter matches the drum body size and material.
Compare rated capacity against the heaviest single load you move. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Model: HK285 / HK300 / LM800; Capacity (kg): 300 / 400; Net Weight (kg): 60 / 63 / 44; Hand Speed Ratio: 0.083333 / 0.459259; Overall Size (mm): 1100×1000×850 / 900×600×950; ForkliftSingle Outrigger Diameter L×H (mm): 150×55.
The specification sheet records ForkliftOutriggerInside Width (mm): 680 / 420; ForkliftOutriggerOutside Width (mm): 970 / 720; ForkliftOutriggerLength (mm): 755 / 150; Drum Diameter Range (mm): Φ570-Φ600.
Those missing values can be requested directly through the enquiry form.
An em dash marks a value the source record did not publish.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
The enquiry should list any attachment the job requires.
Review the tyre type against the surface the machine will run on.
Compare the lowered height against the lowest door on the route.
Check the chassis width against the aisle and the container door.
Compare capacity first, then the lift height the job actually needs.
On the HK285 / HK300 / LM800, send photographs of the racking and the existing working area when possible.
Note any slope, threshold or step along the working route.
On the HK285 / HK300 / LM800, keep the charging or refuelling position clear of the main traffic aisle.
State the shifts per day so the power arrangement can be sized properly.
On the HK285 / HK300 / LM800, list the attachments required, such as clamps, sideshift or rotator.
On the HK285 / HK300 / LM800, the operator follows the rated capacity marked on the chassis.
Loads are kept low while travelling between stations.
On the HK285 / HK300 / LM800, the operator checks load stability before each lift or move.
The working area is kept clear of loose packaging and obstacles.
On the HK285 / HK300 / LM800, related models in the same group are listed on the family page.
The receiving side pairs it with a dock ramp or platform where needed.
On the HK285 / HK300 / LM800, the layout drawing shows where each machine sits in the operation.
Spare parts for wear items follow the parts manual after delivery.
On the HK285 / HK300 / LM800, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the HK285 / HK300 / LM800, capacity above the rated lift height follows the mast curve.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the HK285 / HK300 / LM800, loading is recorded before the container is sealed.
Mixed equipment can be listed on one enquiry.
On the HK285 / HK300 / LM800, quotations follow the model, listed specification and destination port.
Quote the serial number and component name when ordering spares.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.