Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

YL450A / YL450A-1 / YL450B / YL450B-1 — drum handler

YL450A / YL450A-1 / YL450B / YL450B-1 Drum Equipment, rated capacity 500 kg, lift height 2450 mm. Drum handlers lift, rotate and transport drums without manual tilting.

YL450A / YL450A-1 / YL450B / YL450B-1 drum handler — product photo 1 of 8
Why buyers pick this class Full specification →

Ordering facts for the YL450A / YL450A-1 / YL450B / YL450B-1

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

YL450A / YL450A-1 / YL450B / YL450B-1 specification

Values are copied from the source record in their original order and units.

YL450A / YL450A-1 / YL450B / YL450B-1 specification table
ParameterValue
ModelYL450A / YL450A-1 / YL450B / YL450B-1
capacity500 kg
N.W.330 kg
Electric liftyes mm
Electric rotateyes
Weight scaleyes mm
Front wheel sizeΦ80x60 mm
Back wheel sizeΦ150×50 mm
Front leg width630/810 mm
Front leg length740 mm
Overall size1500*950*2100 mm
Turning radius1850 mm
LIfting motor1.5
Battery12/120
Charger12 v
scale charger6 v
Lifting height2450 mm
Lifting speed120
Rotate speed180°/30s
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

YL450A / YL450A-1 / YL450B / YL450B-1 Drum Equipment, part of the Drum handlers line.

Drum carriers, clamps and rotators for lifting, tipping and moving cylindrical containers.

Steel drum clamp carrying

Published figures for this build: rated capacity 500 kg, lift height 2450 mm, turning radius 1850 mm.

Clamps and grippers hold the drum body while the carrier moves it.

Rotation is used for dispensing or emptying a handled drum.

Rotation is used for dispensing or emptying a handled drum.

Grip diameter matches the drum body size and material.

Describe the shifts per day when the power arrangement is selected. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records Model: YL450A / YL450A-1 / YL450B / YL450B-1; capacity (kg): 500 kg; N.W. (kg): 330 kg; Electric lift (mm): yes mm; Electric rotate: yes; Weight scale (mm): yes mm.

The specification sheet records Front wheel size (mm): Φ80x60 mm; Back wheel size (mm): Φ150×50 mm; Front leg width (mm): 630/810 mm; Front leg length (mm): 740 mm; Overall size (mm): 1500*950*2100 mm; Turning radius (mm): 1850 mm.

The specification sheet records LIfting motor (kw/h): 1.5; Battery (v/ah): 12/120; Charger (v): 12 v; scale charger (v): 6 v; Lifting height (mm): 2450 mm; Lifting speed (mm/s): 120.

The specification sheet records Rotate speed: 180°/30s.

Rated figures apply at the standard load centre unless a row says otherwise.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

Measure the pallet footprint before the chassis is shortlisted.

Note any attachment that changes the load centre or the overall width.

List the models that clear each constraint before asking for a quote.

Review the tyre type against the surface the machine will run on.

Compare the lowered height against the lowest door on the route.

  • List attachments such as clamps, sideshift or rotator separately.
  • State the shifts per day so the power arrangement can be sized properly.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the YL450A / YL450A-1 / YL450B / YL450B-1, mark the stations where loads are picked up and dropped off each shift.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the YL450A / YL450A-1 / YL450B / YL450B-1, keep the charging or refuelling position clear of the main traffic aisle.

Note any slope, threshold or step along the working route.

On the YL450A / YL450A-1 / YL450B / YL450B-1, check headroom under beams, pipes and door frames along the route.

Operation and routine checks

On the YL450A / YL450A-1 / YL450B / YL450B-1, battery or fuel levels are checked at the start of each shift.

Unusual noise or movement is reported before further use.

On the YL450A / YL450A-1 / YL450B / YL450B-1, the operator follows the rated capacity marked on the chassis.

The operator checks load stability before each lift or move.

How this model fits the operation

On the YL450A / YL450A-1 / YL450B / YL450B-1, a mixed enquiry can list this model together with other families.

Related models in the same group are listed on the family page.

On the YL450A / YL450A-1 / YL450B / YL450B-1, the receiving side pairs it with a dock ramp or platform where needed.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the YL450A / YL450A-1 / YL450B / YL450B-1, capacity above the rated lift height follows the mast curve.

Any option not listed should be confirmed in writing before order.

On the YL450A / YL450A-1 / YL450B / YL450B-1, the specification sheet is the binding reference for listed values.

Dimensions are checked against the source record before quoting.

Delivery, documents and support

On the YL450A / YL450A-1 / YL450B / YL450B-1, wear parts are supplied after delivery against the parts manual.

The enquiry should include the quantity and destination port.

On the YL450A / YL450A-1 / YL450B / YL450B-1, packing follows sea-freight practice for the chosen chassis.

Quote the serial number and component name when ordering spares.

Ask for the specific certificate required for your target country.

The serial number identifies the build when parts are ordered later.

The parts manual lists the wear items and their reference views.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What load does the YL450A / YL450A-1 / YL450B / YL450B-1 carry?+

The listed rated capacity is 500 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What lift height is available?+

The specification sheet lists 2450 mm for this build. Send the rack beam and door heights together to size the mast.

What aisle width does it need?+

The listed turning radius is 1850 mm. Aisle width also depends on pallet depth and fork length.

What is the machine weight?+

The listed service or net weight is yes mm. This matters for floor loading, ramps and container plans.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Drum handlers related models

ModelCapacityLiftPowerTypical use
YTC300——Bulk packing drum moves
YTC300——Bulk packing drum moves
SD30———Cylindrical container handling
DT400———Drum rotation and dispensing
DTF450A450600—Cylindrical container handling

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.