Vacuum lifter for the installation of sandwich roof and wall panels Vacuum lifter for the installation of sandwich roof and wall panels, rated capacity 800 kg. Rotation and tilting let one operator place a panel into a rack.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Type | CBS4 CBS5 |
| Lifting capacity | 800 kg 800 |
| Maximum panel length roof | 25 m 25 |
| Maximum panel length wall | 14 m 14 |
| Own weight | 125 kg 150 |
| Vacuum circuit | Single-circuit Dual-circuit |
Gallery
All detail images published for this model.














Vacuum lifter for the installation of sandwich roof and wall panels Vacuum lifter for the installation of sandwich roof and wall panels, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Stone and panel handling
Published figures for this build: rated capacity 800 kg 800.
Seal condition is checked before each lift on a smooth surface.
The lifter pairs with a crane, forklift attachment or its own battery frame.
Rotation and tilting let one operator place a panel into a rack.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Compare rated capacity against the heaviest single load you move. State any attachment required alongside the base model.
The specification sheet records Type: CBS4 CBS5; Lifting capacity: 800 kg 800; Maximum panel length roof: 25 m 25; Maximum panel length wall: 14 m 14; Own weight: 125 kg 150; Vacuum circuit (s): Single-circuit Dual-circuit.
Remaining parameters are listed row by row in the specification table.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Measure the pallet footprint before the chassis is shortlisted.
Match the power arrangement to the shifts and the working environment.
Check the chassis width against the aisle and the container door.
Review the tyre type against the surface the machine will run on.
Compare the lowered height against the lowest door on the route.
On the Vacuum lifter for the installation of sandwich roof and wall panels, send photographs of the racking and the existing working area when possible.
Measure the pallet footprint and the heaviest single load before comparing models.
On the Vacuum lifter for the installation of sandwich roof and wall panels, list the attachments required, such as clamps, sideshift or rotator.
Note any slope, threshold or step along the working route.
On the Vacuum lifter for the installation of sandwich roof and wall panels, check the lowest door, beam height and aisle the truck has to pass through.
On the Vacuum lifter for the installation of sandwich roof and wall panels, the operator checks load stability before each lift or move.
Unusual noise or movement is reported before further use.
On the Vacuum lifter for the installation of sandwich roof and wall panels, attachments are secured before the machine leaves the station.
The operator follows the rated capacity marked on the chassis.
On the Vacuum lifter for the installation of sandwich roof and wall panels, related models in the same group are listed on the family page.
Spare parts for wear items follow the parts manual after delivery.
On the Vacuum lifter for the installation of sandwich roof and wall panels, the layout drawing shows where each machine sits in the operation.
Storage cages and racking organise the loads it moves between stations.
On the Vacuum lifter for the installation of sandwich roof and wall panels, dimensions are checked against the source record before quoting.
Attachments are quoted separately once the base chassis is fixed.
On the Vacuum lifter for the installation of sandwich roof and wall panels, any option not listed should be confirmed in writing before order.
The signed datasheet issued with the quotation is the binding version.
On the Vacuum lifter for the installation of sandwich roof and wall panels, the booking reference is issued with the proforma invoice.
Wear parts are supplied after delivery against the parts manual.
On the Vacuum lifter for the installation of sandwich roof and wall panels, loading is recorded before the container is sealed.
Packing follows sea-freight practice for the chosen chassis.
The serial number identifies the build when parts are ordered later.
Ask for the specific certificate required for your target country.
Test and conformity documents follow the model and destination market.
Questions
The listed rated capacity is 800 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.