Vaccum lifter for crane Vaccum lifter for crane. The lifter pairs with a crane, forklift attachment or its own battery frame.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Pneumatic Vacuum Lifter | Lifting Cylinder Rotation Cylinder Flip Cylinder Cup size Cup Numbers Suction Cup Max.Size |
| 300kg | SU100x1000 SU80x400 SU80x300 250mm 4pcs 1150x780mm |
| 400kg | SU125x1000 SU100x400 SU100x300 300mm 4pcs 1200x820mm |
| 500kg | 160x1000 SU125x400 SU125x350 300mm 6pcs 1200x820mm |
Gallery
All detail images published for this model.





Vaccum lifter for crane Vaccum lifter for crane, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Stone and panel handling
Pads are matched to the sheet surface and the load weight.
Seal condition is checked before each lift on a smooth surface.
Rotation and tilting let one operator place a panel into a rack.
Pads are matched to the sheet surface and the load weight.
Match the tyre type to the floor surface rather than the price list. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Pneumatic Vacuum Lifter: Lifting Cylinder Rotation Cylinder Flip Cylinder Cup size Cup Numbers Suction Cup Max.Size; 300kg: SU100x1000 SU80x400 SU80x300 250mm 4pcs 1150x780mm; 400kg: SU125x1000 SU100x400 SU100x300 300mm 4pcs 1200x820mm; 500kg: 160x1000 SU125x400 SU125x350 300mm 6pcs 1200x820mm.
Remaining parameters are listed row by row in the specification table.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
The listed figures follow the record; options are confirmed on the quotation.
Review the tyre type against the surface the machine will run on.
List the models that clear each constraint before asking for a quote.
Check the machine weight against floor loading where the site is raised.
Note any attachment that changes the load centre or the overall width.
On the Vaccum lifter for crane, keep the charging or refuelling position clear of the main traffic aisle.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the Vaccum lifter for crane, send photographs of the racking and the existing working area when possible.
Measure the pallet footprint and the heaviest single load before comparing models.
On the Vaccum lifter for crane, check the lowest door, beam height and aisle the truck has to pass through.
On the Vaccum lifter for crane, the operator checks load stability before each lift or move.
Loads are kept low while travelling between stations.
On the Vaccum lifter for crane, the working area is kept clear of loose packaging and obstacles.
Routine checks cover tyres, brakes, controls and visible leaks.
On the Vaccum lifter for crane, the layout drawing shows where each machine sits in the operation.
The receiving side pairs it with a dock ramp or platform where needed.
On the Vaccum lifter for crane, attachments such as clamps or rotators are matched to the load shape.
This machine usually works alongside pallet trucks and stacking equipment.
On the Vaccum lifter for crane, the specification sheet is the binding reference for listed values.
Attachments are quoted separately once the base chassis is fixed.
On the Vaccum lifter for crane, any option not listed should be confirmed in writing before order.
Dimensions are checked against the source record before quoting.
On the Vaccum lifter for crane, packing follows sea-freight practice for the chosen chassis.
The booking reference is issued with the proforma invoice.
On the Vaccum lifter for crane, mixed equipment can be listed on one enquiry.
Quote the serial number and component name when ordering spares.
Test and conformity documents follow the model and destination market.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.