A tow tractor is specified by the train it pulls and the route it pulls it along, not by the load on the drawbar alone.
The load is the total weight of the carts or trailers plus the goods on them. A tractor rated for a drawbar pull handles a shorter train on the flat and a much shorter one on a ramp.
Count the carts in the longest train you plan, their loaded weight each, and the number of stops on the route.
Gradients decide the motor and brake rating. A ramp of a few degrees changes the required pull substantially, and a loaded train on a ramp also has to be held, not only moved.
Floor condition matters as well: expansion joints, dock plates and painted lines all affect traction and braking distance.
Battery capacity is set by the route length and the number of shifts between charging. Opportunity charging with lithium packs suits multi-shift operation; lead-acid needs a full charge cycle and a ventilated area.
Confirm the destination voltage and plug before the charger is ordered.
Models
Published figures for the first 8 models of this family; open a model page for the full specification.
Electric tow tractor guide model comparison
Questions
The published figure is drawbar pull; the practical train weight also depends on gradient, floor and braking, so the route has to be stated with the load.
With a lithium pack and opportunity charging, often yes; with lead-acid, a second battery or a full charge window is usually needed.
One set.
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.