2ton, 2.5ton, 3.5ton electric tow tractor 2ton, 2.5ton, 3.5ton electric tow tractor. The hitch and trailer count decide the pulling requirement.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | ETP200 ETP250 |
| Traction Capacity | 2000 2500 |
| Driving Motor | w DC24V/800W DC24V/1200W |
| Max. Travel Speed | 6Km/h 5Km/h |
| Battery | 2x12V/100Ah 2x12V/100Ah |
| Overall length | 1705 |
| Overall width | 760 |
| Overall height | 915 |
| Driving wheel size | 406*150 |
| Balance wheel size | 125*50 |
| Wheelbase | 630 |
| Charger | 24V/15Ah |
Gallery
All detail images published for this model.









2ton, 2.5ton, 3.5ton electric tow tractor 2ton, 2.5ton, 3.5ton electric tow tractor, part of the Electric tow tractors line.
Electric tow tractors and tuggers for line feeding and trailer trains in factories and warehouses.
Warehouse tugger runs
Published figures for this build: rated capacity 2000 2500 kg, overall width 760 mm.
Airports, factories and warehouses use tractor trains for long runs.
Train length and braking are checked against the route gradient.
Airports, factories and warehouses use tractor trains for long runs.
The hitch and trailer count decide the pulling requirement.
Confirm the aisle width against the pallet depth before choosing a chassis. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: ETP200 ETP250; Traction Capacity (kg): 2000 2500; Driving Motor: w DC24V/800W DC24V/1200W; Max. Travel Speed (km/h): 6Km/h 5Km/h; Battery (v/ah): 2x12V/100Ah 2x12V/100Ah; Overall length (mm): 1705.
The specification sheet records Overall width (mm): 760; Overall height (mm): 915; Driving wheel size (mm): 406*150; Balance wheel size (mm): 125*50; Wheelbase (mm): 630; Charger (ah): 24V/15Ah.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Measure the pallet footprint before the chassis is shortlisted.
Note any attachment that changes the load centre or the overall width.
Check the machine weight against floor loading where the site is raised.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check the lowest door, beam height and aisle the truck has to pass through.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, check headroom under beams, pipes and door frames along the route.
State the shifts per day so the power arrangement can be sized properly.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, measure the pallet footprint and the heaviest single load before comparing models.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, the operator checks load stability before each lift or move.
Loads are kept low while travelling between stations.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, routine checks cover tyres, brakes, controls and visible leaks.
Battery or fuel levels are checked at the start of each shift.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, a mixed enquiry can list this model together with other families.
The layout drawing shows where each machine sits in the operation.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, storage cages and racking organise the loads it moves between stations.
This machine usually works alongside pallet trucks and stacking equipment.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, the specification sheet is the binding reference for listed values.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, dimensions are checked against the source record before quoting.
Capacity above the rated lift height follows the mast curve.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, documents issued for an order are listed in the quotation.
The booking reference is issued with the proforma invoice.
On the 2ton, 2.5ton, 3.5ton electric tow tractor, loading is recorded before the container is sealed.
Quote the serial number and component name when ordering spares.
Ask for the specific certificate required for your target country.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
Published overall dimensions for this build are about 1.705 m long and 0.76 m wide.
On a standard 20GP dry-van floor that footprint allows about 9 unit(s) per layer; a 40HQ allows about 21 unit(s) per layer.
The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.