ET-100B Electric Tractor, rated capacity 1350 kg. Airports, factories and warehouses use tractor trains for long runs.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | ET-100B |
| Traction Capacity | 1350 kg |
| Driving Motor | DC24V/1200W |
| Battery | 12x2V/210Ah |
| Battery Charger | Portable charger 220V/50Hz or 110V/60Hz~24V/40Ah |
| Max.Travel Speed | 6 |
| Packing Size | 1280x810x1480 mm |
ET-100B Electric Tractor, part of the Electric tow tractors line.
Electric tow tractors and tuggers for line feeding and trailer trains in factories and warehouses.
Internal repeated transport
Published figures for this build: rated capacity 1350 kg.
They move loads a single pallet truck would shuttle one trip at a time.
The hitch and trailer count decide the pulling requirement.
The hitch and trailer count decide the pulling requirement.
Tow tractors pull trailers and carts in trains along fixed routes.
State any attachment required alongside the base model. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Model: ET-100B; Traction Capacity (kg): 1350 kg; Driving Motor: DC24V/1200W; Battery: 12x2V/210Ah; Battery Charger: Portable charger 220V/50Hz or 110V/60Hz~24V/40Ah; Max.Travel Speed (km/h): 6.
The specification sheet records Packing Size (LxWxH): 1280x810x1480 mm.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
The enquiry should list any attachment the job requires.
Check the chassis width against the aisle and the container door.
Note any attachment that changes the load centre or the overall width.
Compare the lowered height against the lowest door on the route.
Check the machine weight against floor loading where the site is raised.
On the ET-100B, check headroom under beams, pipes and door frames along the route.
Note any slope, threshold or step along the working route.
On the ET-100B, measure the pallet footprint and the heaviest single load before comparing models.
State the shifts per day so the power arrangement can be sized properly.
On the ET-100B, check the lowest door, beam height and aisle the truck has to pass through.
On the ET-100B, the working area is kept clear of loose packaging and obstacles.
Loads are kept low while travelling between stations.
On the ET-100B, the operator checks load stability before each lift or move.
Unusual noise or movement is reported before further use.
On the ET-100B, this machine usually works alongside pallet trucks and stacking equipment.
Related models in the same group are listed on the family page.
On the ET-100B, storage cages and racking organise the loads it moves between stations.
The layout drawing shows where each machine sits in the operation.
On the ET-100B, any option not listed should be confirmed in writing before order.
Tyre choice should match the floor rather than the price list.
On the ET-100B, capacity above the rated lift height follows the mast curve.
The specification sheet is the binding reference for listed values.
On the ET-100B, the enquiry should include the quantity and destination port.
Packing follows sea-freight practice for the chosen chassis.
On the ET-100B, documents issued for an order are listed in the quotation.
The operation and parts material travel with the machine.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 1350 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.