ETM-100 Electric Tractor. They move loads a single pallet truck would shuttle one trip at a time.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | ETM-50 / ETM-100 / ETM-150 |
| Traction Capacity | 500 / 1000 / 1500 kg |
| Driving Motor | DC24V/400W / DC24V/800W / DC36V/1200W |
| Rear Wheel | 2X76X50mm / 2X100X30mm |
| Max. Travel Speed | 6 |
| Battery | 2x12V/40Ah / 2x12V/70Ah / 3 x12V/70Ah |
| Charger | 24V/8Ah / 24V/10Ah / 36V/10Ah |
Gallery
All detail images published for this model.


ETM-100 Electric Tractor, part of the Electric tow tractors line.
Electric tow tractors and tuggers for line feeding and trailer trains in factories and warehouses.
Factory train hauling
Published figures for this build: rated capacity 500 / 1000 / 1500 kg.
The hitch and trailer count decide the pulling requirement.
Train length and braking are checked against the route gradient.
Airports, factories and warehouses use tractor trains for long runs.
Train length and braking are checked against the route gradient.
State any attachment required alongside the base model. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model: ETM-50 / ETM-100 / ETM-150; Traction Capacity (kg): 500 / 1000 / 1500 kg; Driving Motor: DC24V/400W / DC24V/800W / DC36V/1200W; Rear Wheel: 2X76X50mm / 2X100X30mm; Max. Travel Speed (km/h): 6; Battery: 2x12V/40Ah / 2x12V/70Ah / 3 x12V/70Ah.
The specification sheet records Charger: 24V/8Ah / 24V/10Ah / 36V/10Ah.
Options and attachments are listed separately from the base chassis.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Door and beam heights decide which mast will clear the route.
Compare capacity first, then the lift height the job actually needs.
Check the machine weight against floor loading where the site is raised.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
On the ETM-100, check the lowest door, beam height and aisle the truck has to pass through.
State the shifts per day so the power arrangement can be sized properly.
On the ETM-100, mark the stations where loads are picked up and dropped off each shift.
List the attachments required, such as clamps, sideshift or rotator.
On the ETM-100, check headroom under beams, pipes and door frames along the route.
On the ETM-100, battery or fuel levels are checked at the start of each shift.
The working area is kept clear of loose packaging and obstacles.
On the ETM-100, the operator checks load stability before each lift or move.
Loads are kept low while travelling between stations.
On the ETM-100, this machine usually works alongside pallet trucks and stacking equipment.
The layout drawing shows where each machine sits in the operation.
On the ETM-100, storage cages and racking organise the loads it moves between stations.
A mixed enquiry can list this model together with other families.
On the ETM-100, the signed datasheet issued with the quotation is the binding version.
Dimensions are checked against the source record before quoting.
On the ETM-100, the specification sheet is the binding reference for listed values.
Any option not listed should be confirmed in writing before order.
On the ETM-100, the operation and parts material travel with the machine.
Quotations follow the model, listed specification and destination port.
On the ETM-100, the booking reference is issued with the proforma invoice.
Quote the serial number and component name when ordering spares.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.