Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

BD20 / BD25 / BD30 — electric tow tractor

BD20 / BD25 / BD30 Electric Tractor. Airports, factories and warehouses use tractor trains for long runs.

BD20 / BD25 / BD30 electric tow tractor — product photo 1 of 3

Ordering facts for the BD20 / BD25 / BD30

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

BD20 / BD25 / BD30 specification

Values are copied from the source record in their original order and units.

BD20 / BD25 / BD30 specification table
ParameterValue
MODELBD20 / BD25 / BD30
Drive typeelectric
Operation typeseated
Load capacity/ 2000 / 2500 / 3000
Wheelbase/ 1600 / 1500 / 1850
Axle loading, laden front/rear1104/2346 / 975/2825 / 1660/3090 kg
Axle loading, unladen front/rear676/774 / 590/710 / 865/885 kg
Tyrespneumatic / solid
Tyre size, front6.00-9-10pr / 16x5x10 1 / 2
Tyre size, rear6.50-10-10pr / 18x5x12 1 / 8
Wheels, number front rear2/2x
Tread, frontb 10 (mm) / 1080 / 920
Tread, rearb 11 (mm) / 1070 / 925 / 1230
Seat height/stand heighth 7 (mm) / 800 / 770
Coupling heighth 10 (mm) / 500 / 400 / 550
Loading height, unladenh 11 (mm) / 750 / 620 / 780
Length of loading surface/ 2000 / 2240
Overhang/ 630 / 770
Width of loading surface/ 1250 / 1100 / 1400
Overall length/ 3200 / 3150 / 3440
Overall widthb1/b2(mm) / 1250 / 1100 / 1400
Ground clearance, centre of wheelbase/ 160 / 90
Turning radius/ 3200 / 300 0 / 3400
Internal turning radius/ 1400 / 1040 / 1500
Travel speed, laden/unladen11/13 / 9/12
Gradeability, laden/unladen%/m / 10/12
Service brakehydraulic
Battery voltage, nominal capacity K548/330 / 48/250 / 48/395
Battery weight662 / 430 / 774 kg
Battery dimensions l/w/h740x426x505 / 740x426x390 mm
Sound level at the driver's ear acc. to DIN 12053/ 75
Service weight1450 / 1300 / 1750 kg
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

BD20 / BD25 / BD30 Electric Tractor, part of the Electric tow tractors line.

Electric tow tractors and tuggers for line feeding and trailer trains in factories and warehouses.

Tow train routing

Published figures for this build: rated capacity / 2000 / 2500 / 3000, overall width b1/b2(mm) / 1250 / 1100 / 1400, turning radius / 3200 / 300 0 / 3400, tyre pneumatic / solid.

The hitch and trailer count decide the pulling requirement.

Train length and braking are checked against the route gradient.

They move loads a single pallet truck would shuttle one trip at a time.

Tow tractors pull trailers and carts in trains along fixed routes.

Compare rated capacity against the heaviest single load you move. State any attachment required alongside the base model.

Specification walk-through

The specification sheet records MODEL: BD20 / BD25 / BD30; Drive type: electric; Operation type: seated; Load capacity (kg ): / 2000 / 2500 / 3000; Wheelbase (mm): / 1600 / 1500 / 1850; Axle loading, laden front/rear (kg): 1104/2346 / 975/2825 / 1660/3090 kg.

The specification sheet records Axle loading, unladen front/rear (kg): 676/774 / 590/710 / 865/885 kg; Tyres: pneumatic / solid; Tyre size, front: 6.00-9-10pr / 16x5x10 1 / 2; Tyre size, rear: 6.50-10-10pr / 18x5x12 1 / 8; Wheels, number front rear (x=driven wheels): 2/2x; Tread, front: b 10 (mm) / 1080 / 920.

The specification sheet records Tread, rear: b 11 (mm) / 1070 / 925 / 1230; Seat height/stand height: h 7 (mm) / 800 / 770; Coupling height: h 10 (mm) / 500 / 400 / 550; Loading height, unladen: h 11 (mm) / 750 / 620 / 780; Length of loading surface (mm): / 2000 / 2240; Overhang (mm): / 630 / 770.

The specification sheet records Width of loading surface (mm): / 1250 / 1100 / 1400; Overall length (mm): / 3200 / 3150 / 3440; Overall width: b1/b2(mm) / 1250 / 1100 / 1400; Ground clearance, centre of wheelbase (mm): / 160 / 90; Turning radius (mm): / 3200 / 300 0 / 3400; Internal turning radius (mm): / 1400 / 1040 / 1500.

The specification sheet records Travel speed, laden/unladen (km/h): 11/13 / 9/12; Gradeability, laden/unladen: %/m / 10/12; Service brake: hydraulic; Battery voltage, nominal capacity K5 (v/ah): 48/330 / 48/250 / 48/395; Battery weight (kg): 662 / 430 / 774 kg; Battery dimensions l/w/h (mm): 740x426x505 / 740x426x390 mm.

The specification sheet records Sound level at the driver's ear acc. to DIN 12053 (a): / 75; Service weight (with battery): 1450 / 1300 / 1750 kg.

Each row in the table keeps the label and value from the source record.

Those missing values can be requested directly through the enquiry form.

Units are copied as published; convert them only when comparing models.

An em dash marks a value the source record did not publish.

How to specify the right build

Configuration follows the load, working height and site layout.

Dimensions in the table come from the source record.

Send pallet size, door height and aisle width with the enquiry.

Compare the lowered height against the lowest door on the route.

Check the machine weight against floor loading where the site is raised.

Compare capacity first, then the lift height the job actually needs.

Note any attachment that changes the load centre or the overall width.

  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • State the shifts per day so the power arrangement can be sized properly.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the BD20 / BD25 / BD30, measure the pallet footprint and the heaviest single load before comparing models.

Note any slope, threshold or step along the working route.

On the BD20 / BD25 / BD30, keep the charging or refuelling position clear of the main traffic aisle.

Mark the stations where loads are picked up and dropped off each shift.

On the BD20 / BD25 / BD30, check headroom under beams, pipes and door frames along the route.

Operation and routine checks

On the BD20 / BD25 / BD30, unusual noise or movement is reported before further use.

Battery or fuel levels are checked at the start of each shift.

On the BD20 / BD25 / BD30, routine checks cover tyres, brakes, controls and visible leaks.

Loads are kept low while travelling between stations.

How this model fits the operation

On the BD20 / BD25 / BD30, the receiving side pairs it with a dock ramp or platform where needed.

A mixed enquiry can list this model together with other families.

On the BD20 / BD25 / BD30, attachments such as clamps or rotators are matched to the load shape.

The layout drawing shows where each machine sits in the operation.

Working conditions and honest limits

On the BD20 / BD25 / BD30, any option not listed should be confirmed in writing before order.

Attachments are quoted separately once the base chassis is fixed.

On the BD20 / BD25 / BD30, dimensions are checked against the source record before quoting.

Capacity above the rated lift height follows the mast curve.

Delivery, documents and support

On the BD20 / BD25 / BD30, quote the serial number and component name when ordering spares.

The operation and parts material travel with the machine.

On the BD20 / BD25 / BD30, the enquiry should include the quantity and destination port.

Loading is recorded before the container is sealed.

The serial number identifies the build when parts are ordered later.

Test and conformity documents follow the model and destination market.

Ask for the specific certificate required for your target country.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

Which tyres are fitted?+

The listed tyre type is pneumatic / solid. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Electric tow tractors related models

ModelCapacityLiftPowerTypical use
ETM-100———Factory train hauling
ET-100B1350 kg——Internal repeated transport
E-350———Warehouse tugger runs
E-Cart———Internal repeated transport
TG20———Factory train hauling

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.