E-Cart 350D Electric Tractor. Airports, factories and warehouses use tractor trains for long runs.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | E-Cart -350D |
| Loading Cap. | 350 kg |
| Walking Speed | Unload:0-6Km/h Loaded:0-4 |
| Platform Size | 1320x720mm |
| Platform Height | 350mm 1050mm |
| Overall Size | 1320x720 x1150mm |
| Battery | 12V/40Ah |
| Portable Charger | AC110V 60Hz/24V |
| Drive Wheel | AL Core Rubberpneumatic Wheel (Dia.260x85mm) |
| Front Wheel | Rubber Mold on AL Wheel (Dia.205x50mm |
Gallery
All detail images published for this model.

E-Cart 350D Electric Tractor, part of the Electric tow tractors line.
Electric tow tractors and tuggers for line feeding and trailer trains in factories and warehouses.
Internal repeated transport
Airports, factories and warehouses use tractor trains for long runs.
Train length and braking are checked against the route gradient.
They move loads a single pallet truck would shuttle one trip at a time.
The operator stays on the tractor for repeated internal transport.
State any attachment required alongside the base model. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Model: E-Cart -350D; Loading Cap. (kg): 350 kg; Walking Speed (km/h): Unload:0-6Km/h Loaded:0-4; Platform Size: 1320x720mm; Platform Height: 350mm 1050mm; Overall Size: 1320x720 x1150mm.
The specification sheet records Battery: 12V/40Ah; Portable Charger: AC110V 60Hz/24V; Drive Wheel: AL Core Rubberpneumatic Wheel (Dia.260x85mm); Front Wheel: Rubber Mold on AL Wheel (Dia.205x50mm.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Door and beam heights decide which mast will clear the route.
List the models that clear each constraint before asking for a quote.
Check the machine weight against floor loading where the site is raised.
Match the power arrangement to the shifts and the working environment.
Review the tyre type against the surface the machine will run on.
On the E-Cart 350D, keep the charging or refuelling position clear of the main traffic aisle.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the E-Cart 350D, list the attachments required, such as clamps, sideshift or rotator.
Check the lowest door, beam height and aisle the truck has to pass through.
On the E-Cart 350D, mark the stations where loads are picked up and dropped off each shift.
On the E-Cart 350D, the operator follows the rated capacity marked on the chassis.
Routine checks cover tyres, brakes, controls and visible leaks.
On the E-Cart 350D, loads are kept low while travelling between stations.
Attachments are secured before the machine leaves the station.
On the E-Cart 350D, the layout drawing shows where each machine sits in the operation.
A mixed enquiry can list this model together with other families.
On the E-Cart 350D, spare parts for wear items follow the parts manual after delivery.
Related models in the same group are listed on the family page.
On the E-Cart 350D, attachments are quoted separately once the base chassis is fixed.
Capacity above the rated lift height follows the mast curve.
On the E-Cart 350D, tyre choice should match the floor rather than the price list.
Any option not listed should be confirmed in writing before order.
On the E-Cart 350D, quote the serial number and component name when ordering spares.
Wear parts are supplied after delivery against the parts manual.
On the E-Cart 350D, quotations follow the model, listed specification and destination port.
The booking reference is issued with the proforma invoice.
Ask for the specific certificate required for your target country.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.